How to Find Replacement Hub For Bass Tracker Pro 170 Boat Trailer

Updated 07/17/2023 | Published 07/15/2023

Question:

I have a 2015 bass tracker pro 170. I would like to replace the entire hub assembly on my trailer but I am unsure of which one it takes. Any help would be appreciated

asked by: Todd R

Expert Reply:

I'm sure we can get you a hub assembly for your 2015 Bass Tracker Pro 170 boat trailer, though I could not find any information regarding what specific one this trailer requires. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.

If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added. You will also need to know your wheel bolt pattern; if you aren't sure what your wheel bolt pattern is I have linked a help article below which details how to find it.

For example, if both of your bearings are L44649 (1.063" inner diameter) and you have a 5 on 4-1/2" bolt pattern you would use the Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 # AKIHUB-545-2-G-2K.

I have added a link below to our entire selection of hubs for you once you find this info.

expert reply by: Kyle S