Adapter Needed to Fit Pullrite 2900 Fifth Wheel Hitch to 2020 Ford F-450 OEM Pucks

Question

Question:

Good evening, I have a 2020 Ford F450 crew cab diesel platinum with puck style package. The 5th wheel Hitch I have is a pullrite 2900 slider hitch, the 20k model. I am trying to find the correct curt rail to oem puck 5th wheel mounting system for this combination. Thank you for your time!

asked by: Tyson R

0

Expert Reply:

Since the Pullrite 2900 hitch was designed to fit industry standard fifth wheel rails the Curt Adapter part # C88KR that you referenced would work for you. This fits the OEM pucks of your 2020 Ford F-450 and provides rails that the 2900 was designed to fit.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 5

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 6

Hey Paul, we have great hitch solutions for the OEM pucks of your 2024 Ford F-350 short bed but whether or not you need a slider hitch is going to be based on the design of the trailer you plan to tow. Normally with a short bed truck you need a…

view full answer...

Answer 7

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 8

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

view full answer...

Answer 9

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Answer 10

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 11

Hello Anthony, Since your 2016 Ford F-250 Super Duty has the standard size bed 6.7' you are going to want a sliding hitch to ensure that you have the clearance on those sharp turns, no one wants to ruin their vacation by taking out the cab of…

view full answer...

Adapter Needed to Fit Pullrite 2900 Fifth Wheel Hitch to 2020 Ford F-450 OEM Pucks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching