Largest Size Anode Rod for Atwood 6 Gallon Water Heater

Question

Question:

How big anode rod can I put in a 6 gallon Atwood water heater. Thank you

asked by: Richard C

0

Expert Reply:

The correct anode rod for an Atwood 6 Gallon Water Heater is the Camco RV Water Heater Anode Rod part # CAM11553 which measures 4-1/2" long x 1/2" diameter. There is also a version of this with a built-in drain valve, the part # CAM11533. There are really only two common size anode rods used in the Atwood Water Heaters, 4-1/2" which is for the six gallon tanks and 9-1/2" which is for the ten gallon tanks.

expert reply by: Conner L

0

Answer 1

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 2

Hi Dorothy, The Seaflo Diaphragm Pump #SE58FR would be a compatible replacement for your Shurflo 4008-101-F65, but it has a lower psi rating so you'd see a bit of a drop in pressure. Instead I recommend going with the Seaflo #SE57FR. This unit…

view full answer...

Answer 3

Yes, the Trailer Valet XL Trailer Dolly #TVXL25 does come with solid rubber tires. We carry the replacements here with part #TVXLSR if you ever need to replace one, but Trailer Valet did upgrade from the pneumatic tires for this superior design.

view full answer...

Answer 4

The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 uses pneumatic tires. There is not a version that has solid wheels. My contact at trailer valet said they have no plans of making a version with…

view full answer...

Answer 5

The Lippert Scissor Stabilizer Jacks part #LC285326 will require a 5/16" drill bit for installation. The holes once drilled will be used to secure the jacks with the included self-threading bolts.

view full answer...

Answer 6

The most important thing to consider when picking out a weight distribution system is the total tongue weight of your setup. This number includes the loaded tongue weight of the trailer (as if it's ready for a trip) along with any added cargo…

view full answer...

Answer 7

First thing we need to do is pick out the correct rated weight distribution system for your 28 foot Airstream. I looked up specs on what you have and the total weight could be 7,600 lbs so you'd most likely have a tongue weight range of around…

view full answer...

Answer 8

Hello Fred, Great question. Your Atwood GC6A-9E water heater does not require an anode rod because it has an aluminum tank, which naturally resists corrosion. Instead, regular maintenance involves flushing the tank periodically and replacing the…

view full answer...

Answer 9

The correct Anode Rod is going to be determined by what water heater you have. Unfortunately, your motorhome information does not tell me what water heater you have. The rod that you were looking at, Camco RV Water Heater Anode Rod #CAM11563 works…

view full answer...

Answer 10

Atwood Water Heaters like your G6A-7 #AT96110 does not use an anode rod because the tank is made of plastic. There is no need for it as the tank will not corrode. If you want to use one, you can use the Camco RV Water Heater Anode Rod - Magnesium -…

view full answer...

Answer 11

Thanks for the pictures! You don't need reverse lights based on them so the part numbers you'd want are driver's side (assuming you need the license plate bracket), use part #30-92-003 and part #30-92-001 for the passenger side.

view full answer...

Answer 12

The Replacement Gas Regulator for Atwood Gas RV Water Heaters #91602 is the correct replacement for your Atwood 91043. It will be a direct replacement.

view full answer...

Largest Size Anode Rod for Atwood 6 Gallon Water Heater

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching