Storage Cover Recommendation for 2022 Sunray Classic 149

Question

Question:

2022 Sunray Classic 149 What is the best cover? Live in CO at 5200 ft elevation. We have sun, snow + strong winds

asked by: Pat

0

Expert Reply:

Since your 2022 Sunray Classic 149 is a little over 16 feet long the storage cover you would want is the Classic Accessories Deluxe PolyPro III part # CA80198 which is the correct size, is shaped to fit your style of trailer, and offers heavy duty protection in the harsher climates you have.

expert reply by: Jameson C

0

Answer 1

Hey Lonnie, thanks for reaching out. I can definitely point you in the right direction, but can you first tell me the length of the body of your 2022 Sunset Sunray 149 Sport camper? The online specs guide lists a length of 16' 2" but they do…

view full answer...

Answer 2

I looked up the Sunset Park RV Sun-Lite 16BH and the official length is listed at 16' 6" therefore in order to find the correct cover we'll need to subtract 3' for the tongue and round up which means we're looking at a cover for…

view full answer...

Answer 3

The storage cover I recommend for a Little Guy Mini Max Trailer is the Adco SFS AquaShed Cover for Travel Trailer part #290-52239. The Adco SFS is a great option that works wells to keep the exterior of the trailer protected from the sun and water…

view full answer...

Answer 4

I spoke with my contact at Classic Accessories on the Classic Accessories Deluxe Heavy-Duty Cover for Teardrop Trailer, part #CA80198, and they said the width is 6-1/2 feet. They said the width is not listed because that cover is designed to fit the…

view full answer...

Answer 5

The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158 is probably…

view full answer...

Answer 6

The difference between a 3,500 and 5,000 lb Timbren Silent Ride is the structural strength of the springs. Also there is a design difference in the hardware depending on what diameter and shape axle you have. Ideally, you want to match the Timbren…

view full answer...

Answer 7

From the mounting surface on the frame of your trailer down to the axle center on the Timbren Silent Ride part #TSR3500S06 measures 5-1/4 inches. You would need to compare that to your current setup to determine if that would change the ground…

view full answer...

Answer 8

I may have a solution for you, but I'm not sure the Timbren Silent Ride Suspension #TSR3500S06 is exactly what you're looking for. The Timbren Silent Ride does not necessarily allow for more travel than your current leaf spring suspension…

view full answer...

Answer 9

The vehicle awning you'd need is one that bolts to the side of your camper like the Thule Hideaway part #TH490011 as there isn't a version of the Batwing that would attach to your roof rack since it sits up so high and the bars do not extend…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The easiest solution is going to be to use the adapter part #20142. This plugs into the 7-way on your Land Rover and has diodes installed in it already so that it can be used with a trailer that has LED taillights like what you have.

view full answer...

Storage Cover Recommendation for 2022 Sunray Classic 149

Product Page this Question was Asked From

Continue Researching