Solution for Needing Replacement Atwood 10 Gallon Water Heater

Question

Question:

Hi I have a hot heater that went out model number GC 10A- 3E which I found out they dont make anymore is there another water heat that they are replacing it with that are same dimensionand size and gal capacity

asked by: Tony

0

Expert Reply:

The water heater you have is a 10 gallon Atwood water heater which is no longer made like you mentioned but what you can do is go with a tankless water heater like the part # FR98SR which offers advantage of never running out of hot water since it heats the water instantly.

expert reply by: Jameson C

0

Answer 1

For your 2020 Thor WindSport Motorhome Model 33X, I recommend checking out the: -Roadmaster Exact Center Steering Stabilizer #RM36RR. This steering stabilizer will fit motorhomes with a maximum GVWR of 22,000-lbs, requires no drilling or welding for…

view full answer...

Answer 2

If you would like to go to an on demand system the Furrion RV Tankless Water Heater #FR68SR will fit your cutout with a door large enough to cover the opening.

view full answer...

Answer 3

Based on the numbers you listed you have an Atwood 10 gallon water heater. For a replacement for that we have the Atwood RV Water Heater - Gas and Electric #AT94022 which is a 10 gallon water heater that would work well. It has both a gas and…

view full answer...

Answer 4

Yes, you can adjust your cutout dimensions and use the 18" x 18" Replacement Access Door for Furrion RV Tankless Water Heater, #FR73FR. Installing the 60,000 BTU Furrion RV Tankless Water Heater, #FR93FR. A second option and my…

view full answer...

Answer 5

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 6

Hi Devon; all of the Atwood G6A models are 6 gallon water heaters with some slight variation within the models which is why you see the Dometic #DMC74FR (Gas/Electric) or #DMC39RR (Gas only) recommended as the replacement. The same is true for your…

view full answer...

Answer 7

Hey Denise, we have one tankless water heater that fits your budget with the Excel part #EX93FR which would work great for you. This is one of the least expensive options out there and it also happens to work really well so I think you'll really…

view full answer...

Answer 8

Hey Jason, since you have a Dexter 7,000 lb axle the correct bearing kit you would need is the part #BK3-210 which comes with the correct bearings and grease seal for a 7k hub. For grease I would recommend the LMX Red grease like part #L11390 for a…

view full answer...

Answer 9

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Kevin, so this is a very valid question but the integrated brake controller of your 2024 GMC Sierra 3500 has a hydraulic mode which allows it to be compatible with EOH actuators like the Hydrastar kit part #HSE7K-T1 that you are interested in so…

view full answer...

Answer 12

Yes, the Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat #K71-694-695-10 that you referenced does fit your 7k Dexter axles. You'd need a quantity of two of these since you have a tandem axle setup and this is enough…

view full answer...

Solution for Needing Replacement Atwood 10 Gallon Water Heater

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching