Customers compare EX93FR to these similar products
Products Featured in this Video
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Excel RV Tankless, Ventless On-Demand Gas Water Heater, has a 38,000 Btu heating capacity. Now, this will let you never run out of hot water again using this tankless on-demand water heater. This tankless design provides endless hot water on-demand inside your RV. This will produce up to about 96 gallons of hot… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
It looks like you ordered both from us today to use with your Carrier lower vent assembly. The heat strip will work with the Advent but if I am being perfectly honest a lot of times these mixed brand AC Unit solutions don't work as consistently…
view full answer...The body of the Excel RV Tankless On-Demand Water Heater #EX93FR is actually 14.5" tall with the optional louver being an additional 4.5" tall. Because of the vent free design this heater can be placed anywhere besides a bathroom or bedroom…
view full answer...As long as the Excel RV Tankless On-Demand Water Heater #EX93FR isn't installed in a bathroom or a bedroom, and is mounted upright with the vent facing upwards, you should be good to go. Those are really the only limitations for mounting, as long…
view full answer...The holes on the Torflex Lift Kit #K71-707-02 are spaced 8" on center for the side holes and the bottom holes. These holes are slightly larger than 5/8" as they use 5/8" mounting hardware. The side mounting holes are offset…
view full answer...The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…
view full answer...Because the Furrion RV Tankless Water Heater, model #FR93FR that you linked to, and other similar models, are most commonly mounted in compartments with exterior access doors that are not heated, the manufacturer recommends that they be winterized…
view full answer...Shawn, for the Excel RV Tankless Water Heater #EX93FR you can use the Camco Single Stage Propane Regulator #CAM59013. This regulator is rated for up to 200,000 Btu, has a 1/4" female NPT inlet, and a 3/8" female NPT outlet.
view full answer...The need for an accumulator tank like the Seaflo Accumulator Tank #SE38FR with the Excel RV Tankless On-Demand Water Heater #EX93FR would depend solely on the pressure of your water pump. This water heater requires a water pressure of 2 psi up to 120…
view full answer...Some items just can't handle the power of propane. **Excel RV Tankless Water Heater - Gas - Electric Ignition - Vent Free - 38,000 Btu #EX93FR. But the Excel Tankless can. You are 100% correct, the heat source for the Excel RV Tankless water…
view full answer...Tankless is definitely the route to go for a replacement water heater. This allows you to have hot water on demand and the RV industry is moving in this direction. If you use the Excel RV Tankless Water Heater #EX93FR (38,00 Btu), then there is no…
view full answer...Yes, to lock out your Reese Sidewinder, like part #RP77FR, for use with a long bed truck you just need to remove the wedge and then install the bolts at the back end of the pin box to prevent it from rotating (see attached). This is the same case for…
view full answer...Is the regulator working okay? Is it below freezing where you are? They tend to freeze up below freezing (regulator) so that could be preventing the propane from getting to the water heater.
view full answer...