Installation of the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems

Published 01/26/2022

Products Featured in This Question

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(170)

$650.00

Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW

(74)

$137.22

Question:

I have an ice castle with a hydraulic frame, and I bought a WDH and pole tongue adapter from you guys. Im wondering if you could help me of where to install the tongue adapter on the hydraulic tongue? Thank you very much

asked by: Austen

Expert Reply:

For the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems, # EQ95-01-5950 you will position the cross beam on the trailer tongue with the included hardware and brackets. Then use your Owner’s Manual to the Fastway e2 Weight Distribution, # FA92-00-1000 to set up and adjust correctly. Please note the attached image for positioning and the linked installation instructions.

expert reply by: Michael R