How Do I Remove the Pin from the Winch Strap Spool on My Detail DK2 Snowplow?

Question

Question:

Here are those photos. Any ideas?

asked by: Keith

0

Expert Reply:

Do you have a photo of the spool and what screws/bolts hold it together?

expert reply by: Bob C

0

My Detail DK2 Snowplow Winch Strap Spool
(click to enlarge)

Keith

1/1/0001

Here are those photos. Any ideas?

Reply

Bob C.

1/17/2022

Thanks so much. I went ahead and reached out to my contact at Detail DK2, and he confirmed that you either have one of two different spool designs for replacement your winch strap with the # K2WS8020. The first type requires the use of a hex wrench with pliers, and the other one only requires pliers to pull of off that pin. Both of these methods will loosen up the strap. From the looks of your photos, it looks like you have the hex bolt version (the opening on the black part of the pin). If you are still having trouble, feel free to respond and I will have some other troubleshooting methods for you.

Reply

Answer 1

We don't have a video that details how to replace the strap of your K2 Winch like part #K2RASP8219, but I did speak to my contact at K2 and he gave me a brief description of the process. On the winch there is a u-bolt that needs to get removed…

view full answer...

Answer 2

The threaded pin needs to be unscrewed in order to remove the Replacement Winch Strap for Detail K2 Snowplows #K2WS8020 on your Summit K2SUSP8826.

view full answer...

Answer 3

You will want to use the Replacement Winch Strap for Detail K2 Snowplows #K2WS8020. This strap is rated for the weight of your Detail K2 Snowplow #K2AVAL8826. The working load is 1,500lbs with a break strength of 3,000lbs. The Replacement Strap for…

view full answer...

Answer 4

My recommendation is that you could consider using the CIPA Handlebar Grip Mount ATV Mirror #CM-11126. This style wraps around the handlebar using a Velcro strap, and can accommodate handlebars up to 1-1/4 in diameter. Please measure your existing…

view full answer...

Answer 5

The Replacement Electric Winch #K2EW8020 is meant to be a replacement for the winch that comes with the snow plows; Rampage K2RASP8219, Rampage II #K2RAMP8219, Storm K2STSP8422, Storm II #K2STOR8422, Summit K2SUSP8826, and Summit II K2SUMM8826. The…

view full answer...

Answer 6

In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements: Inside Diameter: 1.249"…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

To get the replacement hardware for the Draw-Tite Receiver #65070 you will need to order the Replacement Hardware Kit #RHK and type the hitch item number on the line provided.

view full answer...

How Do I Remove the Pin from the Winch Strap Spool on My Detail DK2 Snowplow?

Product Page this Question was Asked From

Continue Researching