Bypassing Factory Brake Controller and Installing Aftermarket Model on 2018 GMC Sierra 3500
Question:
I’m towing a 2019 Jayco 387RDFS Fifth Wheel with a 2018 GMC Sierra 3500HD, 6.6L Duramax, DRW, Long Bed. On several occasions, the brake controller in the truck failed. The first failure was because it blew a 30AMP fuse, which I believe is a fuse for the trailer brakes. The second failure was because of module in the GMC Sierra’s trailer braking system. The third failure was because of different module in the GMC Sierra’s trailer braking system. I get an occasional warning message regarding the trailer brakes or connection. I need a reliable brake controller that will override the factory trailer brake system in the GMC Sierra. The ideal situation would be to have an autonomous trailer brake controller that I can quickly switch to if the factory trailer brake controller fails. Second to that would be to just completely override the factory brake controller with a reliable brake controller. I’m hoping to get some suggestions.
asked by: Dave K
Helpful Expert Reply:
There isn't anything like an autonomous controller that would step up if the factory controller fails.
I'd simply bypass the existing factory brake controller. The GM ITBC, although it works better now than the earlier models has been problematic enough that Tekonsha who provides many of our aftermarket brake controllers has a technical bulletin that specifically addresses how to bypass the factory controller. Let's just say you aren't the only one that's had problems with the factory brake controller.
If you'd like the controller to stay with the trailer and not be permanently installed on the vehicle, the Tekonsha # TK94FR Prodigy RF would be a good choice. To bypass the factory controller, all you'll need to do is locate the harness feeding the factory 7-way trailer connector and peel back the wire loom and electrical tape protecting it. Locate the blue wire exiting the rear of the trailer connector and sever it, leaving a few inches of wire so you can reconnect it if need be or install a vehicle mounted brake controller in the future.
If you're wanting to tow multiple trailers, it would be more feasible to install a controller in the vehicle like the Tekonsha P3, part # 90195. The P3 is one of the controllers I recommend most often because of how good the user interface is and because of the features the controller provides. The controller provides 5 storable settings that you can used for different trailers. You'll only need to set the controller up once per trailer then toggle back and forth as you change trailers. The controller provides a full LCD display to alert you to any problems in the braking system in plain English (or French or Spanish, if you'd prefer) instead of a color changing LED or an alpha-numeric error code that you'll have to remember.
If you decide to go this route, you'll also need the # 3016 wiring harness that connects the brake controller to the connector in the junction box on the firewall behind the e-brake pedal as shown in the linked video.
I'll link to the tech bulletin that will walk you through the process of installing the vehicle-mounted controller. In a nutshell, you'll cut the blue wire of the # 3016 behind the brake controller, leaving a few inches so you can splice on a length of # 10-1-1 wire long enough to run through the firewall, into the engine compartment and under the vehicle to the trailer connector on the rear bumper. You'd sever the wire as described above, and attach the blue wire you've ran from the front.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Remote Control
- Trailer Mount
- Digital Display
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Shop: Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Shop: Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Q&A: How to Bypass Factory Brake Controller in 2019 Silverado 3500 With Prodigy P3
- Shop: 10 Gauge Wire - Blue Primary - Per Foot
- Shop: Trailer Hitch
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Q&A: How to Bypass Factory Integrated Brake Controller on 2015 Chevy Silverado 2500
- Shop: Vehicle Tow Bar Brake System
- Video: DIY Installation for the EcoHitch Invisi Trailer Hitch Receiver - 2024 Tesla Model Y
- Shop: Suspension Enhancement
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Search Results: 3016
- Q&A: Bypassing the Factory Brake Controller on a 2016 Chevy Silverado 3500
- Search Results: 10~1~1
- Q&A: How To Install the Tekonsha Prodigy P3 on a 2015 GMC Sierra 3500 with Factory Brake Controller
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Search Results: tk5906
- Search Results: curt 13315
- Q&A: Aftermarket Brake Controller Install in GM Truck or SUV Equipped With Factory Brake Controller
- Search Results: tekonsha 90195 p3 electronic brake control
- Search Results: 39339
- Search Results: ford transit
- Q&A: Why Does Red and Black Wire of Trailer Wiring 22114 Run to Vehicle Battery
on Trailer Brake Controller
Patrick
3/4/2024
can you share the link to the video bypassing the itbc