Recommended 1200lb Marine Trailer Jack With Snap-Ring Mount

Question

Question:

I am trying to find a marine boat trainer jack 1000 to 1200# that is for a weld on mount that has a snap ring inside diameter of 2. Everything I am seeing has a 2 1/2 inside diameter. Help!

asked by: George D

0

Expert Reply:

I have an option for you, but the smallest marine jack with the smallest snap ring mounting hole is the Bulldog Round, Snap-Ring Swivel Jack - Sidewind - 10" Lift - 2,000 lbs - Zinc Finish # BD151109 which measures 2-1/8".

You best bet to is going to be using the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 and having the included mounting bracket welded on.

I included a video of the # FTJ120W0301 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

This Bulldog Round, Snap-Ring Swivel Jack #BD151109 is a weld on jack and it has a foot base. I attached a pic of this jack for you to check out also.

view full answer...

Answer 2

Jack #DL22210 isn't a snap ring jack but we do have other options that will likely work with your existing mount such as #FTJ120W0301. The hole spacing for the pull pin is 3 inches apart on center. I have linked a video review of this jack for…

view full answer...

Answer 3

The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part #FXP10W0301 if you have a bolt-thru mounting bracket or part #FTJ120W0301 if you have a snap-ring mounting bracket. I…

view full answer...

Answer 4

Not every one of the weld on tubes like what comes with the part #FTJ120W0301 are the same size. However, if you like this jack it would still be your best option to go with it. We do not sell this jack with out the mounting plate so you would want…

view full answer...

Answer 5

Based on my research, the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will be a perfect replacement for your Shelby 5756A trailer jack. This jack will allow you to use the existing snap ring jack mount on your trailer for installation.…

view full answer...

Answer 6

Although we don't offer a direct replacement, as Shelby is no longer in business, the Fulton #FTJ120W0301 would be compatible with the snap ring base your Shelby 5776 used. The jack has a 1200 lb capacity and offers 10 inches of lift. I'll…

view full answer...

Answer 7

According to our research the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit as a replacement for your Shelby 5756 boat trailer jack. It will allow you to keep the same bracket that is currently welded-on. You basically need to open…

view full answer...

Answer 8

We did have a customer come back and say that the Fulton jack part #FTJ120W0301 will attach just fine to the pipe mount on the trailer frame where a Shelby jack just like yours was installed.

view full answer...

Answer 9

What we have heard is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jack 5784. This will be your best option. This jack has a 1,200 lb lifting capacity which would be more than enough.

view full answer...

Answer 10

What we have heard is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jack 5784.

view full answer...

Recommended 1200lb Marine Trailer Jack With Snap-Ring Mount

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching