Recommended 12000lb Winch and Quick Disconnect Wiring

Question

Question:

I want to buy a winch and wire it using anderson connection so when the winch is not in use I can disconnect it and it wont require me to use a second battery on my truck will 175ampnwire.be to little for a 12000k winch

asked by: Brandon J

0

Expert Reply:

We have exactly the parts you are looking for.

Starting with the winch I recommend the Bulldog Winch Standard Series Off-Road Winch - Synthetic Rope # BDW10046 would be a great option that has the 12000lb rating you are looking for, and automatic mechanical brake will hold 100% of the load to minimize winch creep.

For a quick disconnect connection I recommend the Bulldog Winch Front Wiring Kit # BDW20205 if you are planning on mounting the winch to the front of your vehicle, or the Bulldog Winch Rear Wiring Kit # BDW20207 if you are planning on mounting the winch at the rear of the vehicle or on a trailer.

Both of these wiring kits use 2 gauge wire which is made for powering heavy duty winches, and would be the best option as 175 amp wiring would be too small for a 12000lb winch. Both of these kits have quick disconnects allowing you to disconnect the winch when it is not in use to prevent any possible battery draining issues.

If you can tell me where you are planning on mounting the winch, and the Year/Make/Model of your vehicle I would be happy to recommend a front mount hitch and mounting plate for you.

I included a video for each of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

In order to find the correct size wire for a winch you'll need to know the amp rating. The Bulldog Winch Trailer Winch part #BDW10040 for example which has a 12,000 lb capacity and can pull anywhere from 65 - 400 amps depending on the load. It…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Keith, I don't have that exact number but if you check out the picture I attached you can see that the hitch opening is flush with the tow hooks.

view full answer...

Answer 10

For your 2020 Ford F-150, you're going to need a set of tow bars, a braking system, wiring, and a base plate kit. For a base plate kit, I recommend going with the Roadmaster Crossbar-Style Base Plate Kit #RM-524431-4. This base plate creates a…

view full answer...

Answer 11

Hi Keith; you can use a hacksaw or any power tool designed for cutting metal to cut the #LC84FR down to size.

view full answer...

Answer 12

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 and the Curt Front Mount Trailer Hitch Receiver #C31083 are both confirmed to fit your 2020 Ford F-150. They are very similar in design and mount to the same locations on the frame, however the…

view full answer...

Recommended 12000lb Winch and Quick Disconnect Wiring

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching