Correct Lift Kit for Jayco Jay Feather Lite x17z

Question

Question:

Do you have anything i can use? i bought it to use on the beach as well as cross country. It only has like 6 ground clearance which would never work. I will try to attach pictures.

asked by: Steven D

0

Expert Reply:

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part # K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

expert reply by: Conner L

0

Answer 1

Thank you for the photo of the wheels on your boat trailer! The photo helped me determine that a match for the existing wheels are no longer avaialable. Instead, I recommend a comparable wheel, the Aluminum Jaguar Trailer Wheel - 14" x…

view full answer...

Answer 2

Can you get me the brand and capacity of the axles on your trailer?

view full answer...

Answer 3

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

view full answer...

Answer 4

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 5

Suspension enhancement can be used with your weight distribution and will help with rear end sag. So the #CSS-1145R that fits your 2008 Toyota Highlander would help. You'll need to set your weight distribution up again.

view full answer...

Answer 6

Since trailer tires break down and become unreliable at 5-6 years it would definitely be time to replace what you have now. For a wheel and tire with a great warranty, tread pattern and speed rating the Westlake part #274-000053 would be a really…

view full answer...

Answer 7

To choose a correct weight distribution system you need to find your trailer's loaded and ready to tow tongue weight combined with the amount of weight you have stored behind the rear axle of your 2007 Saab 9-7x. From my research the 2013 Jayco…

view full answer...

Answer 8

We recommend using a weight distribution system whenever the loaded trailer is more than half of the vehicle's weight. From what I can find your Jayco X17Z has a maximum weight of 3,500 pounds. Your 2012 Ford F-150 is no more than a little over…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Denny! We can definitely help you out with that rough ride on your trailer. A pretty standard option is an upgraded equalizer like the MORryde you looked at. The best choice is always going to be the one that matches your current equalizer…

view full answer...

Correct Lift Kit for Jayco Jay Feather Lite x17z

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching