Picking Out Replacement Trailer Hub for 2006 Karavan 1250
Updated 05/05/2020 | Published 05/04/2020 >
Question:
I have a 2006 Karavan 1250 trailer for my13 foot Boston Whaler. I am trying to replace the hubs on the trailer It is a five bolt pattern the wheels are 12 . It is an Eazy Lube axle I want to get the right hubs . I chose these 34822545BX . Will that work for my Trailer?
asked by: Chris D
Expert Reply:
If you can confirm that your trailer has 2,000 lb axles yes, the # 34822545BX is the correct replacement hub. We don't have a way to look that up so you'd want to check your axles for a tag that lists capacity or the VIN plate will have that as well. Based on your weight being 1,250 lbs I'd be surprised if this wasn't the correct fit though.
Or if you pull off your old hub and measure the spindle where the bearings ride and find that it's 1 inch in diameter there that would confirm it as well.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Redline
more information >
Continue Researching
- Q&A: Using the CE Smith Fender as a Replacement for a Karavan Fender
- Search Results: trailer fenders
- Search Results: 34822545bx
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2
- Shop: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 1
- Shop: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 12" Wheels - Qty 1
- Shop: CE Smith Single Axle Trailer Fender - Aluminum Tread Plate - 12" Wheels - Qty 1
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Single Axle Trailer Fender - Rounded Edges - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
- Shop: Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
- Search Results: 12 20 wheel studs
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A:
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)

