Replacement Suspension for Tandem Square Axle Venture Boat Trailer  

For a trailer that will be used in saltwater, the best option for rotors, hubs, and calipers is those made of stainless steel. Galvanized coating is the second best option for saltwater, and then dacromet coatings, which provide extra resistance to…

To determine which hubs would be best for your boat trailer there are a few things you will need to look at; the axle capacity on your boat trailer, the inner bearing number, outer bearing number, grease seal number, the bolt pattern of your wheels,…

Brake parts are manufactured with one of several different finishes - raw metal, e-coat, silver cadmium, or Dacromet or they are made entirely of stainless steel. Parts vary in price and in the degree of resistance to corrosion, depending on the…

Your best bet for upgrading the suspension on your trailer with 5,000 lb axles is to change out the springs from 1,750 lb capacity each to at least 2500 lb capacity each. Helper springs would not increase the capacity of your original suspension,…

The heights of the hangers that come with the kit part #APT5 is the distance from where they attach to the frame of the trailer to the bolt hole center of the hanger.

The center equalizer of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs #APT5 is 7-3/4 inches long (center of bolt hole to center of bolt hole) and measures 3-3/16 inches tall; it is the Equalizer #TREQE1. The equalizer that is 7-3/4 inches…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

Thank you for providing all of that information! From the photos and dimensions it looks like you have the suspension kit that's equivalent to the Tandem-Axle Trailer Hanger Kit #APT5. For your axle and hanger spacing you need lead springs that…

Hi Scott; the center to center wheel opening measurement is approximately 36" for the Tandem Axle Trailer Fenders w/ Backing Plates - Steel #HP32VR.

Good question. You are correct that the #A2252CB-GALV is 2-7/8" tall. When measuring an equalizer we will always go from center hole to center hole. The best way to measure the height is to first draw a line between the two lowermost holes, then…

We have a solution for you but because your axle is already over slung and you have taller hangers in place, we are limited in options. From the images you forwarded, you have a T44 axle. I recommend the Correct Track Trailer Alignment and Lift Kit…

Hey Seth, yes we do have a hub/drum that fits the etrailer 7k axle part #e95GR with a 6 on 5-1/2 inch bolt pattern with the part #AKHD-655-6-EZ-K.