Snowbear Plow Receiver Hitch vs Custom Mount

Question

Question:

What are the pros and cons of the Snowbear Plow Receiver Hitch vs Custom Mounts. I have been using my original Snowbear ProShovel with the original 2 point custom mount for 18 years on my 2002 Chevy Blazer with no significant issues. Im considering putting a new Snowbear on my 2017 jeep Wrangler Sport 2 Door and Im nervous about the strength of the single stress/torque point at the receiver mount?

asked by: Kevin C

1

Helpful Expert Reply:

The biggest difference I have seen between the two style is in the amount of play they have side to side. While it isn't a ton there is more play in the single connection point than what you will get out of the custom frame bracket types. We carry both types here but given the choice I would go with the custom bracket version. If you plan on moving it from one vehicle to another from time to time then the hitch mount is the way to go for ease of use.

There is a great option with custom brackets that is slightly larger than the snowbear it is the Detail K2 Summit II Snowplow - 88" Wide x 26" Tall part # K2SUMM8826 and the Custom Mounting Brackets for Detail K2 Snowplows part # K284219 .
If you decide you do want the ability to quickly switch vehicles then the SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall part# SB324-081 and the Curt Front Mount Trailer Hitch Receiver part # 31432 is a great choice

expert reply by: Randy B

1

Answer 1

The canister of the Pace Edwards UltraGroove Retractable Hard Tonneau Cover #PE57CV is 12" tall x 10-1/4" deep.

view full answer...

Answer 2

Hey Fili, so we do have solutions for air bag kits on trucks that are lifted like yours but it comes down to knowing by how much the vehicle was lifted to pick out the correct spacer. So what is your best solution is to go with a Firestone air bag…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Hey Daniel, I actually would disagree with your sales guy on whether you need a sliding hitch or not. The short bed of your 2025 Chevy Silverado 3500 is actually one of the longest "short" beds made so that adds turning clearance. Your…

view full answer...

Snowbear Plow Receiver Hitch vs Custom Mount

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching