To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Getting to your gear doesn’t have to mean climbing into the bed or fighting with heavy panels. The Bedlocker’s electric motor wires directly to the vehicle’s battery and opens or closes the cover in less than 30 seconds using the included key fob. The electro-magnetic brake lets you stop and lock the cover anywhere along the rails for partial coverage when hauling taller cargo. If power is lost, a manual override lever in the canister lets you operate it by hand until power is restored.
When you’ve got tools or equipment in the bed, you want them locked down. The Bedlocker’s interlocking aluminum panels and electro-magnetic brake system keep the cover locked tight wherever it stops along the rails. When used with a locked tailgate, the closed cover secures the entire bed—protecting against both weather and theft. The matte black, powder coated aluminum panels resist corrosion and can’t be pried open like folding or soft covers.
Rain, snow, or wash water all stay outside where they belong. The Bedlocker uses weather-resistant silicon hinges between each panel and a weather-barrier seal at the tailgate to block out dirt and moisture. Any water that does collect is directed into the angled canister, where drain tubes route it through the bed floor to keep your cargo space dry and clear. The powder coated aluminum construction stands up to UV exposure and harsh weather year after year.
You don’t lose bed space or rear visibility when the cover is open. The aluminum panels retract into a low-profile canister at the front of the bed, angled to keep the rear window clear and maximize usable cargo space. Even with the flush-mount design, the cover fits over most fifth-wheel trailer hitches, so towing setups stay accessible when you need them.
The Bedlocker sits level inside the bed rails for a smooth, aerodynamic profile that blends with the truck’s lines and helps reduce drag when closed. Installation is straightforward—rails clamp in place with pivot-arm clamps, and shims are included for tapered beds. Each tailgate clamp has a kickstand to keep the rails level and prevent overtightening, while the canister attaches directly to the rails with no drilling required.
Customer Satisfaction Score:
81% were satisfied with this product
19% of customers were not satisfied
Ratings & Reviews
After getting all of the parts I can put it in now
Great product, easy install no more removing tools every night!
Real good all in all. Does rub in the holding box whenever it’s all the way rolled in. Minor, but rubs.
The remote doesn’t always work. Sometimes you have to jar or push in the cover to get it to engage.
The cover does not work for carbon pro bed,even though in 2 places in your website it confirmed it did. We had to repackage and return. Your website needs corrected,and no one seemed very concerned. Bad experience. I hope I get my credit in a timely m
Great tonneau cover. One year later and still functions like new.
Installation went good and it opens/closes smoothly as of today Monday 8/26/2024. Customer service was fantastic when I called them twice.
Great service,
ALL GOOD FAST DLV
My last truck had the Pace Edwards Bedlocker, so when I got a newer truck I had to get another Bedlocker. Great security. Electric opening without a key. To someone wanting to break into the bed there’s no apparent way to open it.
looks and works great!!! easy install fit my 2024 gmc sierra 3500hd denali perfectly
I love this tonneau. I would reccomed going with this model, but getting the tracks that support their racks. It was Covid time and stock was short. I was lucky to get this one. I would go with 4.5. I think they should have put a more powerful motor. Sometimes it doesn't have the power to open all the way. On another note etrailer was awesome. The rails were bent when the shipment came, they took rails out of there last one in stock and sent them so I could get it installed before my cross country trip.
ALL GOOD FAST DLV
The best cover ever my first one is 2011 is still working and this one works great also
Love the pace Edwards electric retractable bed locker cover with remote. Super convenient .Looks great.
It is not 100% leak proof, minor water intrusion . Also below zero temps the cover will freeze up if accessive water is on it. I rinsed my truck at self serve car wash 20 degrees out and the cover froze up and could not get my Christmas tree in it.I was on a northern Christmas tour. Had to un thaw before it would open.however I do live in Florida so freezing is a non issue … this cover fits RAMBox which many covers will not.
The canister is a bit heavy and awkward for one person to get into the bed. But if this old guy can do it, so can you. Followed the instructions and, for once in my life, didnt have to take something apart to redo it correctly. Just take your time and its actually quite simple. The cover works perfectly, almost completely waterproof seal (maybe I just got lucky) and makes getting access to the bed 1000x easier than the trifold on my previous truck. Top quality, fit and finish are perfect. Would recommend Pace Edwards every time.
great product. exactly what i expected and easier than imagined to install.
Excellent, as always!
I was looking for the very best for my 2022 Chevy Silverado 3500HD High Country and when you want the best, you get Pace Edwards. I've owned other brands before on other trucks such as Roll-n-Lock and ReTrax and both are great products, but for this truck, I wanted nothing but the best. With the track record and quality that comes with Pace Edwards, this is why they are the top of the line. I installed this cover completely by myself, a helper would have been nice to have, I was able to get it done with no issues.
The cover fits perfectly and looks like it was supposed to be there. etrailer's customer support is always top notch and the representative I spoke with on the phone made it so easy to order, she was very friendly and helpful. Everything came well packaged and undamaged. The 2 included remotes are nice, but I also ordered to sets of the accessory wired switch kit. I wired them together, sending 1 switch up front, inside the cab. The other to the back corner of the bed wired up to a weatherproof switch. I spent more time on the wiring than I did installing the cover.
The only thing that kinda bugs me (and this is 100% personal preference NOT an issue with the product) is the tailgate seal at the edge of the cover, the shape and design of the seal is such that it's a double wall flap with a hollow center. Now they may have intended it to sit on top of the edge of the tailgate, but I prefer how it looks butted up against the tailgate like a door seal, which makes a U shape. However I have to keep pushing it down to keep it flat across the back. I may end up sliding a small round piece of weatherproof foam inside, all the way across to create more of an bicycle tire affect, the foam keeps the seal "inflated" while pressure holds it tight when closed up. But that's just me.
Overall, VERY pleased with the products and service. The cover and wiring harness are both high quality, comparable to GM factory. I highly recommend this, well worth the money.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.