Replacement Compressor for Firestone Air Bag Helper Spring System

Question

Question:

I can’t seem to find this model anywhere 24-3582-9285. I do not have a “tank” anywhere that I can see. I believe the compressor just goes straight to my airbags. Thanks for any help

asked by: Tristan

1

Helpful Expert Reply:

The correct replacement compressor would be the # F9499 you had looked at. Just to be sure, I checked with my Firestone representative, who confirmed the compatibility of the replacement.

expert reply by: Mike L

1

Answer 1

While we do not have the technical drawings of the Firestone Heavy Duty Air Compressor #F9499 I can tell you the dimensions. This unit measures 8" long, 3.94" wide, is 6.3" tall, and has a maximum PSI of 150 PSI. Additionally, this…

view full answer...

Answer 2

The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…

view full answer...

Answer 3

That is an excellent point. Firestone was recently here for training and they did address the issues installers have had with the instructions. Basically they are going to be redesigning all the instructions. But for you, you can check for leaks at…

view full answer...

Answer 4

For your Air Spring Union Tee like #F3025-1 the only troubleshooting you can do is what you have already been doing. The Tee fittings simply use a compression so pushing into place is all that is required. The clean 90 degree cut is also all that is…

view full answer...

Answer 5

The Replacement Slider Base for B&W Companion Slider 5th Wheel Trailer Hitch - 20,000 lbs #BWRVB3405 will fit any B&W Turnoverball gooseneck hitch. It is 45 inches long and 34.5 inches wide. The gooseneck center is 15 inches from the back…

view full answer...

Answer 6

The thread size for the output side of the check valve on the Firestone Heavy Duty Air Compressor #F9499 is 1/8" NPT. I reached out to my contact at Firestone who confirmed this.

view full answer...

Answer 7

You can use the Firestone Heavy Duty Air Compressor #F9499 as a replacement for your Firestone Model 21-3582-9014. The Model 21-3582-9014 is an older model that has been discontinued. The Firestone Heavy Duty Air Compressor #F9499 is the most similar…

view full answer...

Answer 8

Yes, there is a check valve in the brass fitting of the Firestone Heavy Duty Air Compressor #F9499 that you referenced which is designed to prevent air pressure from backfeeding into the head of the compressor.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Replacement Compressor for Firestone Air Bag Helper Spring System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching