Availability of Replacement Lift Cylinder for UWS Single Lid Tool Box

Question

Question:

I have a UWS single lid tool box, Lifts that came on it have the name of SpringLift Attwood Corp. SL99-45-1. Both lifts are week and lid slambs shut. The lifts I removed measures tip to tip 10 7/8 inches long. The new ones above measures 11 inches. Will the #UWSLIFTCYLIND THAT OPENS TO 11 INCHES FIT ON MY TOOL BOX that came with the 10 7/8 ?

asked by: Danny H

0

Expert Reply:

I spoke with my contact at UWS and they said that the UWS Replacement Lift Cylinder, part # UWSLIFTCYLIND, will fit all of the UWS toolboxes. The name on the lifts could change if they switch to a different supplier.

expert reply by: Jeff D

0

Answer 1

I recommend etrailer.com Channel Tongue Coupler part #CT-5003-Z to replace the Shelby 5135 coupler. The etrailer.com coupler has a channel width of 3" and takes a 2" ball. It also has 3" from center of bolt hole to center of bolt hole…

view full answer...

Answer 2

Easiest way would be to start with the brand of tool box you have. If it's a UWS we have the part #UWSLIFTCYLIND which will fit it. But if it's a different brand we wouldn't be able to help.

view full answer...

Answer 3

The Taylor Made Marine Gas Strut for Boat Hatches part #3691824-10 is as close as I can get you. It offers an overall extended length of 12" and compressed is closer to 8.5". Using dual struts on a Husky tool box the 10 lb. pressure shocks…

view full answer...

Answer 4

We offer a replacement heavy-duty gas strut with a 10-inch dimension between its ball/socket mounts, part #UWSLIFTCYLIND from UWS which is the item you referenced. This item has a weight capacity of 45-lbs. I could not find a cross reference for the…

view full answer...

Answer 5

I was able to find the 126003 hub and was able to determine that it is a 3,500 lb hub/drum with a 5 on 4-1/2 inch bolt pattern just like the #AKHD-545-35-K that you referenced. This hub will work as a replacement for your Lippert.

view full answer...

Answer 6

A brake axle would have brakes, either electric or hydraulic drum or disc brakes while an idler hub would have no brakes. Many times, a tandem axle trailer will have one braking axle and one idler axle. The 3500 lb capacity #35545I-EZ-89 axle you…

view full answer...

Answer 7

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Answer 8

This is a reason we measure and label our site all the same way rather than going off the description or title from our manufacturers. On the BulletProof Hitches 2-Ball Mount #BPH64FR it is capable of a 4" total drop or 4" total rise. The…

view full answer...

Answer 9

The 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount #358CLEVIS has a spread of 2-1/2" between the tangs. You would also need the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch #BPH64FR. The combination of this clevis…

view full answer...

Availability of Replacement Lift Cylinder for UWS Single Lid Tool Box

Product Page this Question was Asked From

Continue Researching