Recommended Tire and Wheel Combination for Log Splitter
Products Featured in This Question
Question:
Im looking for a 4.80x4.00x8 tire/wheel combo with 3/4inch hole for shaft. Single castle nut holds wheel bearing in place.
asked by: Bryan
Expert Reply:
For your log splitter wheel and tire combination, the pilot hole in the center will be much larger than the hub center. This is not an issue as the wheel will bolt to the hub and be centered based on the lug studs and lug nuts. All trailer spindles will have the single nut holding that wheel bearing in place as you stated. If you have no lugs and only the single center nut then I don't have any wheel options available for that hub centered assembly.
My recommendation is the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30040 if you have 4 lug hubs or # AM30060 if you have 5 lug hubs. These wheels are powder coated for weather protection and have a 2 year warranty on the tire with a 1 year warranty on the wheel. With either of these options you will inflate your tires to 90 psi cold.
This will give you a great tire and wheel for your needs. I've attached some videos to further assist.
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Search Results: 48~8
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Search Results: 480~8
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Search Results: idler hub assembly
- Q&A: Does the Center Pilot Hole of a Trailer Wheel Have to be an Exact Size
- Q&A: Replacement Tire For Log Splitter Trailer With 4.80-8, Load Range B Tires
- Q&A: Switching From Integrated Hub/Wheel on Log Splitter Trailer to Separate Hub and Wheel
- Shop: Replacement Trailer Hub Bearing - L44643
- Search Results: trailer hitch
- Video: Finding the Right Trailer Wiring Harness
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer wiring
- Video: How to Install: Draw-Tite Max-Frame Trailer Hitch Receiver on your 2024 Subaru Outback Wagon
- Search Results: trailer hitch ball mount
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Shop: Roof Rack
- Search Results: brake controller
on Trailer Tires and Wheels
