Can Trailer Axles Be Mounted Above and Below the Leaf Springs on a Trailer
Updated 11/02/2011 | Published 11/01/2011
Question:
I have a tandem axle trailer that I am looking to replace the springs. Currently the axle is located below the springs, which make the trailer bed high off the ground. I have several questions. 1. Can I place them above the springs? 2. If so, how much clearance should I have between the axle and the trailer frame? 3. I notice you sell hanger kits with different center verses front / rear hangers. Is there an advantage to having the center hanger different..and if so what? Thanks in advance...
asked by: Doug M
Expert Reply:
The best and safest way to have the axles orientated to the leaf spring is the way the trailer was originally manufactured. The trailer manufacturer will have tested the trailer with the original suspension setup for adequate braking and handling performance. If you flip the axles it could work fine, but since it has never been tested it is hard to say for certain.
With that being said, you can have the axles on the top or the bottom of leaf springs. If you do have the axles on top of the leaf springs you will want to make sure there is plenty of clearance to allow for the suspension to adequately function. If the axle has 4 inches of travel between the frame and the axle you should be fine.
Depending on the clearance needed we offer different size hangers. The reason the center hanger comes down farther than the front and rear hangers is because shackle straps are used to attach the springs to the hanger. The longer center hanger is to compensate for how the shackle straps bring the distance from the leaf spring to the trailer closer. As long as the springs are level there is not a clear advantage to a certain hanger over an another.
Check out the picture I attached, notice how the shackle straps bring the springs closer to the trailer.
I attached an FAQ article on trailer suspension systems for you to check out also.
Product Page this Question was Asked From
3" Round Trailer U-Bolts (Qty 2)
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- 7 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 2460
- Search Results: 14125a
- Search Results: 25580
- Search Results: dexter 8 219
- Search Results: trailer leaf springs
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-440-2-G-1K
- Search Results: trailer suspension parts
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Search Results: demco 5th wheel hitch
- Q&A: U-Bolt Kit Recommendation for 3" 7K Axle with 7 Leaf Spring Stack
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Video: DeeMaxx Tandem Axle Hydraulic Brake Line Kit Comprehensive Review
- Shop: Trailer Hitch
- Shop: DeeMaxx Alpha G1600 Electric Over Hydraulic Actuator for Disc Brakes - Plug and Play Kit - 1,600 psi
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle
- Q&A: What Size U-Bolts Should be Used for 6k Rated Trailer Axle
- Video: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers Review
- Video: Mount: Dexter Nev-R-Adjust Electric Trailer Brakes on a 2018 Keystone Raptor 5W Toy Hauler
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: HydraStar Disc Brake Kit with Actuator Installation - 2017 Grand Design Solitude 5W Toy Hauler
- Video: Checking Out the Kodiak Disc Brakes-KOD98FR
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Q&A: Can Center Bolt Be Ran from the Bottom Up on Trailer Leaf Spring # SP-113275
- Q&A: Longer U-Bolts For 3 Axles For Roadmaster Roadmaster Comfort Ride
- Q&A: Can Leaf Springs be Placed in Overslung Configuration for a 2022 Grand Design Reflection 31MB
- Shop: Trailer Wiring
- Q&A: Does the MORryde Replacement Wet Shoulder Bolt Come W/ a Nut
- Q&A: Option For Replacing Dexter Leaf Spring Part 072-099-01
on Trailer Suspension Parts
