How to Tow a 2019 Jeep Cherokee Behind a Motorhome

Question

Question:

Can a 2019 jeep Cherokee be flat towed

asked by: Lee B

0

Expert Reply:

You can flat tow the 2019 Jeep Cherokee if it is a 4x4 model with 2-speed power transfer unit. Models with the 1-speed power transfer unit would have to be put on a trailer. None of the 2-wheel drive models can be flat towed but you can dolly tow front wheel drive models from the front.

If you do have a model that can be flat towed and it is a Trailhawk or Overland edition you can use base plates # RM-521451-5. For a compatible tow bar I recommend the Falcon All-Terrain # RM-522. This is a non-binding tow bar so you won't have to be perfectly straight or level to connect or disconnect the Jeep from the motorhome.

The tow bar has safety cable channels so you will need straight cables to fit into them, # RM-645. For lighting a popular option is diode kit # RM-152-98146-7. I have linked a video showing an example installation. Please note that Jeep issued a tech bulletin to install wiring kit 68321424AB when flat towing your vehicle, which is available at your local Chrysler and Jeep dealership.

You may also need a high/low adapter to keep the tow bar level. I have linked a help article showing how to measure and a link to the high/low adapters we carry.

And finally, most states now require supplemental braking on the vehicle being flat towed. One of the preferred systems for our installers and what I recommend is the SMI Stay-IN-Play DUO proportional system, # SM99251. It will apply the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.

expert reply by: Michael H

0

Jim

7/28/2020

i think this is turning in to a very expensive way to tow a car.

Reply

Jon G.

8/4/2020

The initial cost of flat towing is a bit of a bite into the wallet, but a lot of RVers will flat tow the same vehicle for years and so it's only a cost that is needed every once in a while. To minimize the cost over time you can look for parts that can be easily removed and used in other vehicles as well. Getting a trailer would probably be the most cost-effective over the long run, but then you have to deal with finding room for your RV, trailer, AND your vehicle at the campsite.

Reply

Answer 1

In addition to the Roadmaster Tracker #RM-020 tow bar you referenced, you will need a base plate kit, safety cables, wiring and depending on the states you will be traveling in, a supplemental braking system. The Roadmaster #278-1, which fits all PT…

view full answer...

Answer 2

I have attached for you below the recommended procedure to flat-tow a 2019 Jeep Cherokee Trailhawk per the owner's manual. The last step states to place the ignition in the off position so that is what I must recommend. 1. Bring the vehicle to a…

view full answer...

Answer 3

Does your 4WD transfer case have a high gear and low gear setting? If so, that would indicate you have a 2 speed transfer case. If there's no indication it has a high or low speed then it's a single speed transfer case. If you have the 4x4…

view full answer...

Answer 4

Yes, a 2018 Jeep Cherokee Latitude Plus 4x4 can be flat towed and we have everything you'd need to be able to do so. You'll need to start with a base plate which attaches to the vehicle frame and provides a connection point for the tow bar to…

view full answer...

Answer 5

We have just what you are looking for with the part #FOS07TASF. This is the Furrion Vision S system that comes with the 7 inch monitor and camera like you are wanting. This does not come with the side marker cameras but if you want to add those later…

view full answer...

Answer 6

We have all of the parts you are needing. First things first you will need to add a base plate kit to your 2021 Jeep Grand Cherokee Trailhawk 4WD. I recommend the Roadmaster Direct Connect Base Plate Kit #RM-521451-5 due to it having removeable arms…

view full answer...

Answer 7

Hello Bryan, I see that you already placed your order for the flat tow system. I will go over the parts that you ordered: The Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521451-5 will work great just as long as you have the…

view full answer...

Answer 8

Thankfully in recent years the Mopar flat towing wiring kit you mentioned is no longer required for flat towing Jeep vehicles like the 2021 Jeep Cherokee Trailhawk. They were able to fix the need for the harness. We have the other parts needed to…

view full answer...

Answer 9

Hey James! Congrats on your new purchase! To flat tow your 2022 Jeep Cherokee Trailhawk you will need the following parts: Base Plate Kit - Blue Ox Base Plate Kit item #BX1143. This is designed specifically for the Trailhawk models and will work…

view full answer...

Answer 10

To flat tow your 2022 Jeep Cherokee Trailhawk you will need the following parts: Base Plate Kit - Blue Ox Base Plate Kit - Removable Arms item #BX1143 Wiring Harness - Roadmaster Smart Diode 7-Wire to 6-Wire Kit for Variable Voltage LED Lights item…

view full answer...

Answer 11

Yes, you will need to install a charge line kit, like #RM-156-25, to prevent the battery from draining while you flat tow your 2020 Jeep Cherokee. If your motorhome doesn't already have a line ran to the 12v accessory pin on the 7-way then…

view full answer...

Answer 12

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

How to Tow a 2019 Jeep Cherokee Behind a Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching