Will the Stromberg Carlson Tray Part # CC-255 Work with an Equal-i-zer Weight Distribution System
Question:
Thank you for emailing back to me. I have other question about the hitch tongue weight. The max is 530 lbs and I did calculated all the weight Tongue Weight was about 405 lbs including tray generator and gas tank 1 gallon). It looked like the tray is compatiable. But if you see the pictures of the base triangle that I wasn't sure to install by myself. I would remove the black tube behind the propane if the tray block. Please advice. Thank you.
asked by: Wendy
Expert Reply:
No, the Stromberg Carlson Trailer Tray Cargo Carrier part # CC-255 would not interfere with the frame brackets on any of the Equal-i-zer Weight Distribution Systems. The reason for this is because of its wide range of adjustability. The Equal-i-zer system's frame brackets will install 27" - 32" back from center of coupler whereas the Stromberg Carlson bracket's can install anywhere on the a-frame where the rails are between 12" - 52" apart. There may be some adjusting or rearranging of propane tanks but nonetheless should work well for you.
I have attached a photo of the tray installed with the frame brackets of a similar weight distribution system left on to give you better idea of what I mean by the above.
Product Page this Question was Asked From
Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers - 300 lbs
- RV Cargo Carrier
- Cargo Tray
- A-Frame Trailer Mount
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Continue Researching
- Video: A Closer Look at the Stromberg Carlson Trailer Tray Cargo Carrier
- Video: Installing the Stromberg Carlson Trailer Tray Cargo Carrier on a 2019 Forest River Flagstaff Hard Si
- Shop: Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers - 300 lbs
- Shop: Stromberg Carlson Gen Secure Locking Generator Storage Box
- Q&A: Torflex Lift Kit Height for 2020 Rockwood Mini Lite 2506S
- Shop: Hellwig Adjustable Rear Anti-Sway Bar - 1" Diameter
- Q&A: How to Mount 2 Batteries on A-Frame Trailer with Limited Space on Tongue
- Search Results: generator mount
- Shop: Taskmaster Provider ST225/75R15 Radial Tire with Black Machined Trinity Wheel - 5 on 4-1/2
- Shop: RV Covers
- Q&A: How to Carry Generator on Camper Trailer Tongue
- Q&A: Can Generator Be Used When Mounted On Stromberg Carlson Trailer Tray Cargo Carrier
- Q&A: Bike Rack Solution for Mounting Bikes on an Accessory Tray on My Travel Trailer
- Search Results: propane cover
- Video: Stromberg Carlson Gen Secure Locking Generator Storage Box Spec Review
- Search Results: dual fuel generator
- Shop: Adco RV Propane Tank Cover for Dual 20-lb Tanks - White
- Shop: Classic Accessories RV Propane Tank Cover for Dual 20-lb Tanks - Gray
- Shop: Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs
- Search Results: hellwig anti~sway bars
- Q&A: Lift Kits Available for Torflex Axles
- Search Results: generator cover covers
- Search Results: dexter trailer axles
- Search Results: torflex lift kit
- Video: etrailer Inverter Generators Storage Cover Review
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Complete Breakdown of the Torflex Lift Kit
- Video: Comprehensive Review: Torflex Lift Kit
- Shop: Ladder Rack
- Q&A: Recommended Solution to Fix Sag on 2018 Nissan Armada SE Towing Trailer with Weight Distribution
Wendy
6/18/2018
Thank you for emailing back to me. I have other question about the hitch tongue weight. The max is 530 lbs and I did calculated all the weight Tongue Weight was about 405 lbs including tray generator and gas tank 1 gallon). It looked like the tray is compatiable. But if you see the pictures of the base triangle that I wasn't sure to install by myself. I would remove the black tube behind the propane if the tray block. Please advice. Thank you.