Recommended Off-Road LED Light Bar for 2002 Toyota Sequoia

Question

Question:

I have a 2002 toyota Sequoia and was wanting to put an Led Light bar above my windshield... do you have anything that will work ...

asked by: Bill M

0

Expert Reply:

We do carry off-road LED light bars that are a fit for your 2002 Toyota Sequoia; I recommend the MaxxTow Off-Road Light Bar # MT80636. This light bar has a mixed flood beam and spot beam so you can see at a wide angle and at a distance. It has two rows of 3-watt LEDs that have a 30,000 hour life span and comes with the mounting hardware and wiring harness necessary for installation.

I've added links to video reviews of this bar for you to take a look at as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

While we haven't had the opportunity to make a video on the 2018 JL. However the installation is quite easy to do with simple hand tools! It can be done in around an hour plus or minus a few minutes. Westin designs most of their kits as a no…

view full answer...

Answer 2

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Alan; as long as you don't have the factory OEM wheel liners you can use the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set #WT66MV on your 2025 Sierra 1500 Denali Ultimate.

view full answer...

Answer 5

Hey Lynn, I recommend using the MB Sturgis Sturgi-Stay T-Fitting w Hose #103615 which will allow you to connect your 20 lb tank to a 100 lb tank. The red type 1 ACME fitting will connect to one of your tanks, and the pigtail from the tank will…

view full answer...

Answer 6

Thanks for the question, Chris! The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT66GR is confirmed to fit all models of the 2022 Ford Explorer so it will definitely fit the ST-Line you're asking about. If you'll be doing any towing be…

view full answer...

Answer 7

Since your 2013 Ford F-250 Super Duty has an impressive lift in the suspension and 40 inch tires, the towing capacity will decrease to an unknown value. The hitch height measurement you provided, 33-inches from the top of the receiver tube to the…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

I recommend installing the SumoSprings #SSR-106-47-1 on the rear of your 2023 Ford E-450 Class C cutaway chassis. In my experience I feel these are the best option as they cushion the suspension while the Timbren #TFERSD you found is much stiffer and…

view full answer...

Answer 10

If you want to totally lock the B&W Tow & Stow 3-Ball Mount #BWTS10048C you would need a lock set that locks the shank to the hitch and locks for the platform then to the shank with the InfiniteRule Locking Pins #34061775-D.

view full answer...

Recommended Off-Road LED Light Bar for 2002 Toyota Sequoia

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching