Does Installing Curt Trailer Hitch # 13013 Require Removing Rear Bumper

Question

Question:

okay i was wondering do you have to take the bumper off to put the hitch on?

asked by: Branson

0

Expert Reply:

I checked the install instructions for the Curt Hitch part # 13013 and you have to unbolt the bumper brackets and remove the bumper.

expert reply by: Jameson C

0

click to enlarge

Hector

5/24/2020

I'm looking for a hitch for my 1995 Toyota Tacoma 4x4. What do you recommend?

Reply

Chris R.

5/26/2020

For your 1995 4WD Tacoma I highly recommend the Curt # 13013. It features a 5,000 pound towing capacity and allows for a no-drill installation.

Reply

Johnny O.

7/2/2020

I have a 2000 Tacoma and want to install a trailer hitch with wiring and no welding, What would you recommend please?

Reply

Chris R.

7/7/2020

For your 2000 Tacoma the Curt Class III Trailer Hitch # 13013 will work perfectly. It will bolt right onto the truck's frame rails using existing holes - no drilling or welding required. Then for a wiring harness I recommend the Tekonsha T-One # 118379, which will just plug in behind the tail lights.

Reply

Answer 1

There are actually 6 bolts connecting the CURT trailer hitch #13013, to the frame on the 2002 Toyota Tacoma, and the factory bumper will need to be removed and reinstalled to complete the installation. This will require disconnection and reconnection…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew, your best option would be to go with the Rhino Rack roof rack part #RR23VE that is a confirmed fit for your 2012 GMC Sierra and then also get the fit kit part #DK454 so you can swap it to the 2019 Honda HR-V. The bars will be a little bit…

view full answer...

Answer 5

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 6

Hey Rick, yes the EcoHitch Stealth hitch part #EH57CR that you referenced does fit your 2024 Subaru Crosstrek Wilderness edition. This is a really great option to carry a bike rack. There's no trimming of the bumper required nor does the exhaust…

view full answer...

Answer 7

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Answer 8

Choosing an adjustable ball mount is a great idea for when you have multiple towing applications. Since the Draw-Tite Max-Frame Trailer Hitch Receiver #75882 for your 2014 Ram ProMaster 1500 (non-EXT model) has a 2" hitch receiver I recommend…

view full answer...

Does Installing Curt Trailer Hitch # 13013 Require Removing Rear Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching