Can the CE Smith Deep V Keel Roller Assembly Part # CE10455G Support a 9,000 Lb Boat
Question:
I have a Cutwater 28 in a Triple axel EZ Loader trailer. The boat weighs about 9000 lbs. I am looking for something to help with pushing the bow up to the winch roller as ther is a lot of resistance with the bunks. If front bunks are under water the bow come in too low and pulls away from the winch when pullin g out. If 18 inches of the front bunks are out it lines up great but takes a lot of effort to drive up or lots of strain on the winch. Would this roller on the front cross beam stand up to the weight to help roll up to the bow stop?
asked by: Scott
Expert Reply:
The CE Smith Deep V Keel Roller Assembly part # CE10455G will do an excellent job of helping to guide the boat out of the water and position it onto the boat trailer all while reducing the stress on your winch. However, using just one of the rollers would not offer enough support for your 28' long 9,000 lb boat. In order to support the weight of the boat you will want to use several of the rollers positioned them just slightly above the frame rail so they are not taking responsibility for the entire weight of the boat.
I have attached a photo/review for you that will display how the rollers should be mounted on your trailer for full effectiveness.
Product Page this Question was Asked From
CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 12"
- Boat Trailer Parts
- Rollers
- Keel Roller
- Thermoplastic - Non-Marking
- 12 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 12"
- Shop: CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel
- Shop: CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"
- Shop: Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 8" Long - 5/8" Shaft
- Shop: Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 10" Long - 5/8" Shaft
- Video: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases: The Breakdown
- Video: Breaking Down the BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps
- Video: Yates Keel Roller for Boat Trailers Spec Review
- Video: Ultimate Overview of the Roller Shaft with Pal Nuts for Boat Trailer Rollers
- Video: Ultimate Overview of the CargoBuckle G3 Retractable Ratchet Tie-Down Straps
- Video: CE Smith Panel Bracket for 12" Boat Trailer Rollers: The Breakdown
- Search Results: ce10727a
- Q&A: How to Install Boat Keel Rollers When Replacing V Bunks on Trailer
- Q&A: Is My 1996 Champion 552 Boat Too Heavy To Use CE Smith Keel Roller CE29505?
- Q&A: Proper Trailer Bunk Board Length for 21 Foot Boat
- Q&A: Will 12 inch Keel Roller Help Load Boat on Trailer in River
- Q&A: How To Help With Centering Boat On Trailer When Loading
- Q&A: Can I Use the CE Smith Self Centering Keel Roller on my Trailer
- Q&A: Can Two Self Centering Keel Rollers Install on Boat Trailer
- Video: Detailed Breakdown of the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 8"
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: boat trailer parts
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
on Boat Trailer Parts
