Curt Sway Tab Weld On Position For Ball Mount and Friction Sway Control # 83660
Products Featured in This Question
Question:
Just receive my order and need to know Which is the correct position to weld the sway tab to the ball mount? - Reese sway control kit PN 83660 has drawing that shows sway tab welded such that sway ball is 1 3/8” forward of tow ball - curt sway tab PN 45822 has drawing that shows sway tab welded where sway ball would be even with tow ball Which is correct? Or are they both acceptable?
asked by: Bob
Helpful Expert Reply:
You will want to mount the tab # C45822 to work with the sway bar you are using. I recommend following the Pro Series instructions of # 83660 for best function since that is the friction sway bar you are utilizing. I've also included the diagram to help with the location of the tab for both width and depth so you will also want to ensure it is 5-1/2 inches on center from ball to ball.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 2" ball
- Shop: 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Shop: Curt RockerBall Shock Absorbing 2" Hitch Ball - 1" Diameter Shank - Chrome - 7.5K
- Shop: Curt Anti-Rattle Kit for Hollow Shank Accessories - 2" Hitch
- Shop: Reese Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 8-1/8" Long - 7.5K
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Video: All About the Reese Friction Sway Control Kit
- Video: Complete Breakdown of the Reese Friction Sway Control Kit
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 1-1/4" Hitch - 3-7/8" Rise - 3,500 lbs
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2-3/4" Rise - 7,500 lbs
- Search Results: anti sway
- Search Results: weight distribution ball mount
- Shop: Trailer Hitch
- Shop: RV Camera
- Search Results: sway control trailer hitch ball mount
- Search Results: 675364
- Q&A: Is There a Way to Use Friction Sway Control with a Ball Mount that Fits a 2-1/2 inch Hitch
- Q&A: How is Draw-Tite 3442 Sway Control Tab Attached to Ball Mount
- Search Results: curt sway control only
- Search Results: weight distribution hitch
- Q&A: What Size Socket is Needed For 2-5/16 Inch Hitch Ball
- Q&A: Can Trailer Hitch Reducer Be Used For Towing on 2022 Ram 2500 Diesel
- Q&A: Why Does Use of Hitch Adapter/Extender Reduce Hitch Tongue Weight and Trailer Weight Ratings
- Q&A: Is it Safe To Use a 2-1/2 to 2 Inch Reducer Sleeve With a Weight Distribution Trailer Hitch?
- Q&A: Is It Safe to Tow Cross Country Using a 2-1/2 to 2 Reducer Sleeve
Ben
10/10/2024
Can it be farther than 5 1/2 inches from hitch ball? If so what is the max in between the two balls?