Installation of B&W Extend-A-Goose Gooseneck Coupler
Updated 08/08/2017 | Published 08/07/2017
Question:
Hello, Recently we received our TEXA400 10inch extender for our gooseneck trailer. The pin holes are side to side on the device but the pin holes on my trailer are front to back. Maybe I just am looking at it wrong but I cannot figure out how to install this on my trailer especially given the hole placements. There are a ton of videos but all showing the installation on the truck side. Maybe you have one from the trailer side? I am sure you can straighten me out... I am sorry if I am just not looking at this right. thanks for the help
asked by: Wendy S
Expert Reply:
Yourr trailer's coupler uses set screws to hold the tube in place instead of a cross pin. In this case you'll still use the set screws in the same fashion they're being used to install the Extend-A-Goose # BWTEXA4200 and you won't use a cross pin through the pin holes.
Product Page this Question was Asked From
B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset - 24,000 lbs
- Gooseneck Coupler
- Coupler with Inner Tube Only
- Round Tube
- 10 Inch Offset
- 24000 lbs GTW
- 2-5/16 Inch Gooseneck Ball
- Manual Latch
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: trailer brakes
- Search Results: self adjusting trailer brakes
- Search Results: lippert trailer brakes
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Video: Review of Lippert Trailer Brakes - Electric 12 Inch L R Trailer Brake Assemblies ABS Hubs - LC83PX
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 12" - Left/Right Hand - 5.2K - 7K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Video: Feature Review Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies
- Search Results: saftey chains
- Video: Review of etrailer Replacement Return Spring etrailer Ram Square Direct Weld Jack - TJD-12000-RSP
- Video: Feature Breakdown: Safety Chain Kit for Shocker Hitch 5th Wheel to Gooseneck QuickAir Hitch
- Q&A: Offset Coupler for Ecortic Gooseneck Hitch
- Q&A: Dimensions Of The Replacement Return Spring for etrailer and Ram Square, Direct Weld Jacks
- Q&A: Can a B and W Extend a Goose Goosneck Coupler be Used with a 4 inch Offset Gooseneck Ball
- Q&A: Recommended Gooseneck Hitch And Wiring For 2012 Ford F-150 With 5-1/2 Ft Bed
- Q&A: Should Longer Safety Chains be Used With B&W Extend-A-Goose Gooseneck Coupler
- Video: Review of Andersen Replacement Straight Coupler With Cable System Ranch Coupler Adapter - AM3101
- Search Results: 5th wheel pin box
- Search Results: gooseneck trailer coupler
- Video: Comprehensive Review: Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler
- Search Results: gooseneck coupler
- Video: Hands-On with the Replacement Boot for Convert-A-Ball 5th Wheel to Gooseneck Adapters
- Q&A: What are the Dimensions of the Gooseneck Coupler Head # 291300
- Q&A: Could Ranch Hitch Gooseneck Adapter Safety Chains Fit Gooseneck Hitch
- Article: How to Replace an RV Roof Vent Cover