Mounting Kit Availability for Aries Grille Guard on a 2007 Toyota FJ Cruiser

Question

Question:

I have an extra Aries 2059 Brush guard that is missing the lower and middle brackets. I have the upper bracket that goes through the grill. Will the kit AABRKT-2059 have all of the brackets necessary to mount the Aries 2059 to the 2007 Toyota FJ Cruiser?

asked by: Robbie

0

Expert Reply:

The Aries Grille Guard that fits a 2007 Toyota FJ Cruiser is the part # AA2059 which is what the bracket kit part # AABRKT-2059 is designed to fit. That means it would fit and work well on your vehicle.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Hardware for Aries Automotive Grille Guard part #AABRKT-2059 does come with the left and right side. Check out the linked picture to see the entire kit.

view full answer...

Answer 2

Hello Gerard, thanks for reaching out. For starters, the Weigh Safe True Tow Weight Distribution Hitch #WS79VR is a good choice for your Flagstaff Microlite 21DS travel trailer. It sounds like your tongue weight will be below the 850 lb limit, so…

view full answer...

Answer 3

Hello Mark, Happy to help you find the right weight distribution hitch to meet your needs. I don’t have a database that supplies specs for trailers (though it would be pretty sweet if one existed), so based on my research, the Rockwood Mini Lite…

view full answer...

Answer 4

Hey Chris, the Weigh Safe weight distribution system part #WS94RR would work great for you. This has a tongue weight range that would work great with your trailer that has a tongue weight of 880 lb.

view full answer...

Answer 5

Thanks for reaching out, James! That's going to be a pretty sweet setup you'll be putting together! I really like the 12.5K Weigh Safe True Tow Weight Distribution Hitch #WS94RR for this application as well. The built-in tongue weight scale…

view full answer...

Answer 6

Hey Stevie! The Weigh Safe180 Hitch 6" Drop Hitch item #WS64mr weighs 19 lbs. It is made of aircraft grade aluminum which is what makes it so light compared to other adjustable double ball mounts. The Weigh Safe item #WS64mr has a 8,000 lbs…

view full answer...

Answer 7

I checked the owners manual for your 2007 Toyota FJ Cruiser and there is nothing keeping you from using a weight distribution system on your vehicle. The towing capacity of your vehicle is rated at 5000 lbs, and tongue weight is rated to be a 500 lb…

view full answer...

Answer 8

Yes. If you don't need the weight distribution bars attached to carry the trailer to storage, you can absolutely use just the WD hitch head and ball to tow the trailer. It will work just like a ball mount.

view full answer...

Answer 9

While I can sympathize with your issue, it is not safe to tow a trailer if you only have a 2" hitch ball and your trailer coupler is designed for a 2-5/16" hitch ball, even for a short distance; the insecure connection between hitch ball…

view full answer...

Answer 10

You can tow a trailer with a weight distribution setup that does not have the spring bars connected. As long as the head of the system is attached to the shank properly (there's no reason it wouldn't be) it would work just as well as a…

view full answer...

Answer 11

You can attach the Brophy Recessed Trailer D-Ring Tie Down with Backing Plate, #RR5K, most anywhere on a trailer. The recessed D-Ring is designed to be recessed in a wood surface (floor, wall) and using the steel backing plate will make a stronger…

view full answer...

Answer 12

We offer D-ring tie down products with working load limit (WLL) ratings from 330-lbs, as with the Brophy #SR10-C, up to more than 15,500-lbs, as with the weld-on Curt D-ring #C83780. The Brophy D-ring #RR01-C you referenced has a WLL of 400-lbs, half…

view full answer...

Mounting Kit Availability for Aries Grille Guard on a 2007 Toyota FJ Cruiser

Product Page this Question was Asked From

Continue Researching