How to Activate Trailer 12V Power Feed on Factory 7-Way in 2016 Silverado

Question

Question:

I have a 2016 Chevy Silverado that came with a factory 7 Way plug. I can not get power to my camper. In my 2014 I had to hook up a wire under the hood but for the life of me I can not find that in the 2016. Do you know where I might find the cord or something else to give my camper power while hooded up?

asked by: Shelley

0

Expert Reply:

Some trucks do need an under-the-hood connection of wiring to activate the 12V trailer power feed and the trailer brake controller power input feed. This process is outlined and illustrated in the linked article, in the section titled "Finalizing Connections for the Brake Controller".

The ring terminal for the 12-volt power lead for the 7-way trailer connector is located to the left of the power distribution box. It is taped to a wire harness under the power brake booster. Cut the tape to release it from the harness. Then run the wire to the front of the power distribution box and hook the ring on the right post (M8 stud).

expert reply by: Adam R

0

Lowell

3/13/2020

Im trying to get 12 volts to the 7 pin connector on my 2017 GMC Sierra 3500. I dont see any wires taped near the brake controller. Did they change something on the 2017s?

Reply

Chris R.

3/13/2020

I think you might just be dealing with a blown fuse on your 2017 Sierra. The trailer 12V charge fuse is located in the # 2 position inside the fuse box under the hood. You can use the diagram on the lid to find this particular location. Replacing this fuse should hopefully resolve the issue but let me know if not.

Reply

Sean M.

5/14/2024

Did you find out the issue? I have a 2017 Sierra 3500 as well and dont have a fuse in the #2 spot. there is not even terminals in the spot

Reply

Gary

7/27/2024

@SeanM did you ever figure it out? I too have a 2017 Sierra (with a factory brake controller btw) and no fuse or terminals in the #2 position.

Reply

See All (5) Replies to Lowell ∨

Lowell M.

3/14/2020

It was the fuse. I had an electrical problem with my trailer last summer and never checked the fuse. Thanks! you saved me a trip to the Stealer.

Reply

Chris R.

3/16/2020

Great to hear! Feel free to reach out if anything else comes up.

Reply

Tony

5/4/2020

Does the factory trailer plug on a 2017 silverado come with a 12volt wire?

Reply

Chris R.

5/7/2020

Yes, the 12V circuit on your Silverado's factory 7-Way should be active.

Reply

Answer 1

I can help you understand the reason there is different information on our website. Special trailer tires have a maximum speed rating, just like passenger car and truck tires. Older tires have no special marking to designate a limit. Their maximum…

view full answer...

Answer 2

Thanks for all of the details, Stu! The Diamond C trailers use Hydrastar electric-over-hydraulic actuators which means the OEM brake controller on your 2024 Chevy Silverado 3500 SHOULD work just fine with it. I say "should" because…

view full answer...

Answer 3

I do have an option for you but we do not carry any Mor/Ryde products so I would not have any replacement parts if that is what you are looking for. If there are components that are rusted or corroded then it would be best to just replace the entire…

view full answer...

Answer 4

Hey Brian, I have some less than awesome news. The Q20 hitch actually wasn't designed to be used with a pivoting pin box like the Turning Point so there isn't a wedge we can recommend you use. This is one of the reasons Curt redesigned the…

view full answer...

Answer 5

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

view full answer...

Answer 6

The latest version of the Sidewinder is not compatible with the Curt A-Series of hitches, including the A25 #C24FR. A similar 25k hitch that will work and fits in the pucks of the 2020+ Silverado/Sierra is the B&W Companion OEM 5th Wheel Hitch…

view full answer...

Answer 7

Thanks for reaching out! To lift your 2020 Grand Design Reflection 150 260RD 5th Wheel so it's 2" taller I recommend using the Correct Track Trailer Alignment and Lift Kit #RR23QX. This installs using the same frame mounting brackets that…

view full answer...

Answer 8

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 9

On the B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs #BWRVK3600, the moving components of the locking jaws need to be lubed but the pin does not need lube. These jaws are the only part of the hitch that…

view full answer...

Answer 10

I have a ground clearance answer for you. As far as the shortest retracted length, the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 and the Replacement Short Left Rear Leg - Ground Control…

view full answer...

Answer 11

I was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC342610 (428493)…

view full answer...

Answer 12

It sounds like you are needing to replace one of the rear legs for your Lippert Ground Control leveling system. The Rear legs have a mounting plate with 11 holes. So I believe we are on the same page here. There are going to be a few options for the…

view full answer...

How to Activate Trailer 12V Power Feed on Factory 7-Way in 2016 Silverado

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching