Is There A Standard When Installing Rack'Em Heavy Duty Stake Pocket
Updated 01/09/2017 | Published 01/06/2017
Question:
HI, I need a whole mess of these puppies for a 22foot flatbed and want to know what spacing you suggest for instance I suppose three or four per end, and HOW many feet between them down the sides?
asked by: Mike G
Expert Reply:
When installing the stake pockets like part # PK-BSP, there is no standard installation. You will want to make sure you have enough to secure the loads you plan on carrying.
I called my contact at Rack'Em and they told me if you are planning on using them for tie-downs then you will probably want to use more of them for that use but if they are for walls on a truck then you can use 3 or 4 per 8-ft section. Again, this is up to you and depends on how these are to be used. It is always better to have more and not need them than to find out later you do not have enough.
Product Page this Question was Asked From
Rack'Em Heavy Duty Stake Pocket for Flatbed Truck or Trailer - Bolt On - Steel - Qty 1
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Stake Pockets
- 2 x 4 Stake Pocket
- RackEm
more information >
Continue Researching
- Search Results: 7 pin wiring
- Q&A: Recommended Brake Controller for a 2022 Chevy Silverado 1500, 2500, and 3500
- Search Results: sign in
- Search Results: 331~tph~010
- Video: Complete Breakdown of the Replacement Bottom Lug for Polar Cam-Action Latch Kits
- Video: Mount: Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness on a 2022 Chevrolet Express Van
- Video: B and W Gooseneck and Fifth Wheel Adapters - Adapts Truck - BWGNXA4025 Review
- Video: In-Depth Review of the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness
- Video: Checking Out the Gooseneck to 5th Wheel Trailer Coupler Adapter
- Video: 6" Wide Continuous Hinge Review
- Search Results: gas shock
- Search Results: cam action
- Search Results: cam lock
- Search Results: tekonsha harness
- Shop: Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Roller Ramp Door Greasable Hinge Pin - 9" Long - 1" Pin Diameter - Steel
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Shop: Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs
- Shop: Gas Shock - 20 lb Force - 15" Extended, 8.91" Compressed - Black Nitride
- Shop: 1-1/2" Wide Continuous Hinge - 6' Long - Stainless Steel
- Shop: 2" Wide Continuous Hinge - 6' Long - Steel
- Q&A: How Many Weld-On Stake Pockets # HW03-080 to Install on Each Side of 12-Foot Trailer
- Video: Breaking Down the Gooseneck to 5th Wheel Trailer Coupler Adapter
- Q&A: CURT Gooseneck Installation Kit for a 2011 Ford F-150 with 6-1/2 Foot Bed
- Q&A: Determining If Buyers Products Flat Bed Hitch Plate 3371809055 Will Fit Vehicle W/ Tommy Lift
- Q&A: Would The Rack'Em Heavy Duty Stake Pockets Work For Compact Tractor Tie Downs?
- Q&A: Diagram for Replacing Titan Model 10 Actuator Shocks
- Q&A: Does etrailer Powered A-Frame Jack # e55ZV Have Light for Night Cranking/Jacking
- Article: Best Ladder Racks
on Tie Down Anchors
