Replacement Stud or Hub/Drum for Broken Stud on Trailer Hub

Updated 06/02/2016 | Published 05/31/2016

Products Featured in This Question

Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C

(7194)

$60.58

Replacement Wheel Stud, Screw-In, 1/2" x 2"

(90)

$12.86

Kodiak Wheel Bolt - 1/2" Diameter x 2" Long

(128)

$9.85

Question:

Hi, Ive one broken stud on a trailer wheel and am wondering if I can still drive with it. There are 5 studs on each wheel, it is a single-axle trailer with an 18foot boat on it. Thanks.

asked by: George

Expert Reply:

You might be able to get away with it for a while, but I cannot recommend driving with a broken stud on one of your trailer hubs. Fortunately we do offer both replacement studs and new hubs.

I linked our main page for hub/drum parts such as drive-in and screw-in wheel studs like # K12WB2 and # 25-53. I also linked our page for hub/drum assemblies in case you prefer to simple replace the bad hub. Be sure to confirm your wheel bolt pattern (there are several 5-stud bolt patterns - please see linked article), axle weight rating and bearings used in your hub to ensure compatibility.

expert reply by: Adam R