Lug Nut Torque Specification with Trailer Idler Hub Assembly AKIHUB-440-2-G-1K
Updated 04/28/2016 | Published 04/25/2016 >
Question:
What is the torque specification for this lug and hub assembly?
asked by: Phil
0
Expert Reply:
The # AKIHUB-440-2-G-1K uses a 1/2 inch wheel stud. 90-95 ft lbs of torque is probably about right for the lug nuts. If you check out the lug nut torque chart that I attached you will see that nearly all the torque specs are that and higher. The wheel material also affects torque ratings, so it is lower for aluminum and higher for steel.
expert reply by:
Jameson C
0

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Search Results: marine grease
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Video: The Low-Down on the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: Replacement Idler Hub Recommendation For Boat Trailer With 07100 Bearings
- Q&A: Correct Bearing Buddy Grease Seals for 1" Trailer Spindle
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Video: A Closer Look at the LubriMatic White Lithium Grease
- Video: Feature Breakdown: LubriMatic Marine Trailer Wheel Bearing Grease
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: bearing grease
- Search Results: grease
- Search Results: wheel bearing grease
- Search Results: hitch pin
- Q&A: Recommended Idler Hub for a 1 Inch Straight Spindle
- Q&A: Hub with 4 Lug Bolt Pattern that Uses Bearing Numbers L44649
- Q&A: 4 On 4" Lug Pattern Idler Hubs Galvanized That Use L44643 Bearings For 2,000LB Boat Trailer Axle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643