Do all Fifth Wheel Rails have the Same Dimensions

Question

Question:

Are all 5th wheel rail mounts universal.

asked by: Parker D

0

Expert Reply:

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though.

If you measure 22 inches on center between the two rails and they look like the rails of the # RP30035 that you referenced they would be the industry standard.

These rails can fit hitch brands Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky.

expert reply by: Jameson C

0

click to enlarge

Mark

8/8/2020

will the rails and hard ware from a 2012 ram fit a 20q6 toyota tundar

Reply

Jon G.

8/19/2020

It kind of depends on what brand you have for your Ram and what exact kit, but the rails from a 2012 Ram pickup can possibly be used for a 2016 Toyota Tundra - you just need to confirm what you have on your Ram and then make sure you get the correct mounting brackets for your Tundra. For example, the Rails # RP58058 are universal and fit the vast majority of trucks on the market, but the mounting brackets needed for the install can vary. For your '16 Tundra you'd need # RP50084.

Reply

Answer 1

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

view full answer...

Answer 2

The Reese Elite Series under bed puck system, part #RP87FR is compatible with your 2017 Ford F250. The puck spacing is identical to hat of the Ford OEM system, so you'd be able to use any puck mounted hitch designed for the Ford OEM tow/prep…

view full answer...

Answer 3

The MORryde StepAbove RV Step part #MR65RR is the same as the STP-210 which is the newest generation. It is designed for a 31-1/2" - 37-1/2" entry height and 27-3/4" - 28-1/4" doorway width. It's a strut assisted model. If you…

view full answer...

Answer 4

Hey Joe thanks for the information! The PullRite ISR Series SuperLite 5th Wheel Hitch item #PUL53RR does not require a gooseneck ball because it attaches to industry standard base rails. Since your Ram truck has the puck system you would need the…

view full answer...

Answer 5

Since you have a 4' breakaway cable any 4' coiled cable can be used. You can use the Fastway #FA80-01-2204, which will come with the plunger as well or the Fastway #FA80-01-2140 if you're plunger is still is good shape, you'll just…

view full answer...

Answer 6

So from what I can gather it sounds like you're looking for a B&W Companion that is compatible with ISR, in which there isn't one unfortunately. The B&W Companion is designed to be used with either a factory puck system like…

view full answer...

Answer 7

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 8

On the rails that come with universal installation kit #RP30035 there are 4 holes at either end of each rail and on either the forward or rearward flange for a total of 8 holes per end per rail. From the center of the outer most hole to the center of…

view full answer...

Answer 9

Hey Robert, A 5th wheel trailer with a 15,000 GVWR will only need a 5th wheel hitch that has a capacity exceeding that, so you're going to want one rated for 16,000 lbs at least. After that it really depends on your budget and the quality you…

view full answer...

Answer 10

The first thing you will need is the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector, part #C55243. This will plug directly into your OEM tow package port. Once that is in place you will need the 7-Way RV…

view full answer...

Answer 11

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

view full answer...

Answer 12

Most likely, the fifth wheel rails already installed on your 2006 Ford F-350 are above-bed, industry standard rails. Most manufacturers (with some exceptions) use these types of rails for their fifth wheel hitches to install into. Each manufacturer…

view full answer...

Do all Fifth Wheel Rails have the Same Dimensions

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching