Socket Size Required to Remove the Jounce Bumper on a 2009-2015 Ford F-150

Updated 02/09/2016 | Published 02/08/2016

Products Featured in This Question

Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle

(2863)

$613.88

Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb

(49)

$56.60

Question:

I couldnt find this answer yet on your website. What size socket is needed to remove the jounce bumper bolt on a 2014 F-150 for your F2525 kit? Thanks

asked by: Randall

Helpful Expert Reply:

We used a 14mm socket to remove the jounce bumper on a 2014 and 2015 Ford F-150. The jounce bumper is about 4 inches long, so you will want to use an extension. I would use a 4 inch extension if you are using a standard socket and a 2 inch extension if you are using a deep well socket.

I have attached an installation video for you to check out for the Firestone Ride-Rite Kit, # F2525, on a Ford F-150.

expert reply by: John H