Customers compare MPG544 to these similar products
Products Featured in this Video
Randy: Hey guys, it's Randy here at etrailer.com. Today we're going to take a look at the Malone Dual Hitch.Now this is designed to fit into a standard 2 inch by 2 inch receiver tube opening. It then comes back from there and it's going to give us a dual receiver tube opening. The lower one is rated for accessories and towing, the upper one's going to be rated just for accessories. As… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, the etrailer brake assembly part #AKEBRK-7R-SA would work to replace a Dexter 023-327-00 which is a passenger side self adjusting brake assembly. The matching left hand side would be the part #AKEBRK-7L-SA.
view full answer...I do have an option for you but you cannot use multiple hitch adapters together like the dual hitch adapter part #D-192 and the hitch extender part #C45791 for example. This would create too weak of a connection point and would limit your towing…
view full answer...Thank you for providing a photo of your Aliner's spare tire mount on its rear bumper. Any bike rack designed for use on the rear of a camper or trailer has to be specially built to withstand the forces encountered at the rear of such…
view full answer...I do have an option for you but I cannot advise you combine two hitch adapters together like the Roadmaster Hitch Extender part #RM-071 and the Roadmaster Dual Hitch Receiver Adapter part #RM-077-4 as this would be very unsafe. However, if you need…
view full answer...Yakima does not recommend backing their Rack and Roll trailers like the #Y08107 you mentioned into water as the bearings aren't sealed and neither are the electrical connections. Your best option would be to back it right up to the waters…
view full answer...The Yakima EasyRider Double Decker Trailer #Y08129 is pretty well setup for off-road situations like you mentioned. It comes with shocks and decently aggressive tread tires so that it would handle moderate off-road scenarios like what most find…
view full answer...The Yakima EXO Swing Away Enclosed Cargo Carrier for 2" Trailer Hitch #Y62VR may or may not cover your tail lights and license plate. If it does, you can add the License Plate and Tail Light Relocation Kit for Yakima EXO System #Y74VR This kit…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...There is not a way to attach a sway bar tab to that ball mount, or a way to use a bike rack and weight distribution with an adapter. If your 2023 Kia Telluride has a roof rack you can use a roof-mounted rack like the Yakima FrontLoader #Y02103.…
view full answer...At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…
view full answer...The biggest pro to using one valve stem to maintain air pressure in an air bag kit is that you always know that both bags will have an equal amount of pressure in them. If you have an application where equal pressure on both sides is always the norm…
view full answer...The weight capacity of the Malone Dual Hitch Extender, part #MPG544, is 4000 lbs and 400 lbs for tongue weight. Using this extender reduces the towing weight capacity of the hitch on your vehicle by 50 percent. If the hitch that is installed on your…
view full answer...