Are Brophy Tie-Downs Compatible with Newer Super Duty Pickups with Aluminum Bed  

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

According to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you…

The Brophy Camper Tie Downs part #HSAB are a universal fit tie down that would fit your 2010 Toyota Tundra as long as the bed liner you have isn't a drop in style. If it's a spray in style then you'd be fine. If you have a drop in style…

The strongest camper tie downs for your 2022 Ford F-350 short bed without boards and a factory hitch is the Torklift tie downs #TLF2022A and #TLF3008A which are made from aluminum and stainless steel. This also means that it would never rust or…

We do have the parts you're seeking for your 2021 Ford F-350. If you wanted a stake pocket tie down, the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #TDSF are a universal solution that would work…

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed so…

CR Brophy, the manufacturer of the #HSSF, does not list specific vehicle fits. But you can determine if the HSSF tie-downs will fit by checking the following: Tie downs will not fit double wall beds- bed needs at least 2 inches of width under the lip…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…