Adapter Rails for Curt 5th Wheel Hitch Head for a 2017 Ford F-350 With Prep Package  

The Curt E16 and Q16 use the same slider base. The Q16 head is #C16520 so it will fit the same slider base that is on your E16 now.

The Curt R16 Round Tube Slider for E16 and A16 5th Wheel Trailer Hitches #C16560 you have is only rated for up to 16,000lbs so you would need to replace the legs with the Curt R20 #C16550 as well as the head #C16540 to get a 20,000lb towing capacity.…

The differences between the Curt Q, A and E series hitches come down to the quality of the jaw system and damping offered by the hitch head. • The Q24 that you'd looked at, part #C16545-16021 features a standard 2 piece jaw that does a good job…

Yes, the Curt E16 Hitch Head can be swapped out for the Curt A-Series or Q-Series. The A-Series is the new design and what I recommend using. It has a more secure locking jaw system than the Q-Series among a few other things. I recommend using part…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…