Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Square-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately.
Features:
Specs:
Note: If using a slider, hitch will not adjust to lowest height setting.
Note: This fifth-wheel trailer hitch will not fit pickups with beds shorter than 6'. It also will not fit trucks with flareside/stepside bed. A minimum 13" extended trailer pin box is recommended.
Unlike the more economical slide-bar models, the rounded, 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Most often used on trucks with 6' beds, this roller helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a roller to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (257 Customer Reviews)
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Square-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately.Arrived yesterday, box with hitch was broken, UPS driver said he taped it up. All parts look good. Plastic bag with small parts was torn open, 2 small parts missing, I can get them locally. I understand that there heavy Just need to be packaged better. Otherwise all ok.
I’ve alway used hitches from Reese and enjoyed their performance. This is my first 5th hitch. It broke on the third pull. The rod holding the jaws fractured opening one side of the jaws. Thank God the trailer stayed attached and we made it home. Reese saw it was a warranty issue and replaced the hitch. Currently we are still using it and all appears to be working fine
Slide spring steel came out 9n first install. Hasn't worked right since. Had same one before and no problems.
Ordered this hitch for my 2014 Chevy,it came in two boxes and was put together on the work bench in no time at all. and I also ordered the custom rail kit RP50064-58. Just in time for summer camping.
Leroy N.
6/26/2014
By the way I didnt have to cut my heat shield or remove my exhaust pipe when installing the custom rail kit.
Leroy N.
6/22/2015
Great,Just put the hitch in again last weekend ready for the bush and mosquitoes.
Nice ride with this hitch . I was kind of on the fence about the pivoting but I’m good with .
Lisa
3/12/2024
Fabulous! I love the way it handles. Glad I bought it .
I purchased the Reese dual jaw slider and install bracket kit. Everything arrived in three days in perfect condition. After watching the install video and reviewing the enclosed instructions I installed the assembly myself. It took approximately 4 hours . As you can see I also did additional steps, cutting the rubber bed mat to fit around the rails. Also undercoating the brackets to blend in the wheel wells. Etrailer is definitely the place to go for all your RV needs.
Instructions are very good, all parts came with the hitch and were well protected.
This is the first time I've ever put one of these hitches together so I read the instruction thorough.
There was some lubrication that was required.
It took me 1 1/2 hours.
The only thing I can add is when installing the upper handle for the release pin, it had burrs on the inside of the handle and made it difficult to slide onto the tube.
Make sure you check for burrs and deburr before installing. I would still give them 5 stars.
Missing lots of parts was repackaged, also used, all scratched. Called CUSTOMER SERVICE none in stock to replace
Jenny N.
5/15/2024
I know that we will have a replacement sent out as soon as we have it. I am sorry that it arrived in this condition to you.
I received the Reese 5th wheel 16,000 lb slider hitch from etrailer in June 2019; installed it in July 2019. Took around five hours to install the base rail kit and Reese hitch start to finish. So far so good, this heavy duty slider hitch works flawlessly with my F250/fifth wheel combo. It arrived in multiple boxes, had excellent instructions and an operating manual. For myself and other do-it-yourselfers, etrailer provides excellent support and installation videos to help with the install.
Love the hitch. Hooks up easily and solid. Gives plenty of clearance. Only downside is it’s very noisy and you really feel the trailer. But for the price and weight it’s still 5 stars. Going to go up to a highway payload truck and will be getting the B&W companion for that. Not a reflection of the performance of this hitch though
I've used this hitch in an 08 f250 and a 15 ram 2500. All I had to do was purchase a set of frame brackets. The fact this hitch can be easily moved among tricks is great. Easy hitching and unhitching. Easy to use. Easily adjust heights. And the slide option being available is great.
This hitch has a feature or two we didn't even expect. It was an easy install and is performing great. Plenty of maneuverability and rock stable. etrailer's service was incredible and stayed on top of the delivery until we got it. We thought they went the second mile to make sure we got our hitch.
Being a first time 5th wheel owner and After researching for the right 5th wheel hitch for my 2011 ext cab chevy Z71 4wd. and the best prices i went with the reese 16 K slider hitch. A must for a 6 1/2 ft bed.
And etrailer had the best price and were very helpful answering all my questions
The hitch arrived in 3 days,
One of the 2 boxes was a little torn up but nothing was damaged,
The instructions were great,and it had more than enough hardware needed for different apps.
I had 2. choices for the mounting brackets,I went with the custom fit not the universal the custom brackets are strong and fit perfect.
I watched a couple install videos online,there were not many on my truck people said you have to cut out your exhaust and your heat shield and drop the gas tank.I did not have to drop my gas tank i just slightly bent down the heat shield to reach above it then pushed it back up.
I used the Allen button head bolt for the left front and had my wife spin the bolt with a long extension and ratchet while I held the nut and washers with a magnet and my finger tips,it was kind of a (pima) and took a little time but way better than dropping my tank.
I did call Reese with a couple questions and suggested to use stronger shipping boxes.
The only thing I had to adjust was the support for the parking brake cable.
I did the hole job on the ground in my yard
This also was a good time I replaced my rear brakes,checked my spare tire psi,and llubed my cable for the spare lift.
Every one was verry nice and helpful from etrailer and Reese.
I wish I was better with computers and could of made a video
Thomas S.
5/11/2020
Still working great.I have room my hitch out a couple times not the railes and it was simple.I am berry satisfied with the hitch and mounting plates i went with.I highly recommend this product.
Ordered the Reese 16K square tube slider on Wednesday and received it on Friday even using the free shipping. That is a remarkable delivery on any product especially a very heavy 5th wheel hitch. Assembly requires only a few basic tools. Took my time and within a couple of hours had it installed and ready to use. Bed rails were already installed.
Jimmie W.
9/18/2016
Have towed my 36 Cedar Creek 5th wheel about 600 miles with the hitch. No problems. Does what it is designed to do. You can spend more if you wish but this is a good solid hitch. Also would recommend etrailer.com to anyone as the place to buy. Keep up your great service.
I give etrailer 1 star I would like to give them no stars (less than poor) for this transaction. I received this hitch Thursday 2/10/2022 the box was in a very tattered condition. I opened the box on the next day Friday 2/11/2022 it appeared that the box did not contain all of the pieces for the hitch, looking at the box it showed that there should have been 2 boxes, I received box 1 of 2. I called and spoke with someone at etrailer they informed me that UPS had damaged the second box in shipping, and that they had returned box 2 of 2 to etrailer. I was never informed by UPS or etrailer of what had taken place. I never received any notification that the first box had been delivered. The only correspondence that I have received was an email from Carol C informing me that she was notified that my order had been delivered, she also sent me this link for me to write a review. I have been told by the person that I had spoken to that my missing parts to my hitch would be shipped. It is now 2/14 I still have not received any notification of my parts being shipped, or when I will receive them.
Jenny N.
2/19/2022
I will have our customer service team reach out to you.
Amazing service
I needed this in a hurry and it was here in 3 days.very happy
This is a great hitch. I've been using it for a year now and have had no problems with it.
Quick delivery hitch required minor assembly it was open box but looked like new. Works great very pleased with purchase.
Steven R.
9/8/2021
After a year of use this hitch is still like new. I am still very happy with this purchase
I finally got the hitch installed. Everything went great, thanks again for the great service.
Overall the product seems to be good quality. The instructions could be a lot more clear. After calling Reese, even the guy on the phone agreed that the spacers provided should be shown as going in above or below the bed. Unfortunately with the size of the U spacers provided, there would be no way to get the nut on the length of bolt sent. Also there were lock washers in the package which the CS rep didn't know what they were for either. Finally, the cotter pins provided are weak, 2 broke already and the handle to adjust the slider didn't have holes drilled for the cotter pin to keep it in place so i just drilled it myself. As a side note, the way the pins lock it in to make it removable, it has quite a bit of play which you can then hear when backing up or starting off.. Using on a Ford F250 2015 6-3/4 bed, pulling a FR 33BHOK (about 11k loaded).
This hitch was used and missing parts I waited 3 months for this hitch only to have someone who did not do there job properly !!! it must have been a return and sent to me without inspecting the return it was more than likely sent without inspection /sad my time and my money awaiting the return
Brooke M.
9/22/2021
Thank you for bringing this to our attention. Our customer service team should be reaching out to you in the near future.
I bought it used it twice got rid of the 5th wheel. Never again would I own a 5th wheel biggest mistake I ever made
And it's for sale so if you know someone who would want it let me know
I'm very happy with the product, service and price. I originally had a used non sliding Reece fifth wheel hitch installed in my 6 1/2 ft. Tundra Bed. It didn't have enough clearance for backing into some spots and my new truck cab got dented ($1,700 repair bill). This sliding fifth wheel is the answer, very easy to install on same bed rails.
BTW etrailer doesn't recommend a non sliding fifth wheel for my truck. Smart.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
9/27/2024
Are you talking about the leaf spring in the slider? I have never heard of that coming out after install. I do know that you have to grease it with white lithium during install otherwise it maybe hard to adjust. The bottom of the spring has to be coated monthly. If you give me more detail on what is going on, I am happy to help.