Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 part number: Y00429
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Clear anodized alloy finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06119
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006119 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06148
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006148 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06119
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06148
Average Customer Rating: 4.8 out of 5 stars (1811 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.1608442
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!1644209
Follow the instructions, and you can't go wrong on the self installation1757391
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.870712
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.1550963
by: Roland01/08/2024
Well packaged and on time 1708575
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.1250442
by: Rafael07/03/2020
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done! 830132
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos. 830253
by: Sara03/19/2019
2017 Honda Pilot
Yakima is always great, the bars are just right for my kayaks and look great too. 612864
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.1515794
by: Orlando12/05/2022
Hi, the company, good profesinal service. The product, all I pay was there. Very easy to install. Thanks Bless1478927
by: Moparnut22808/20/2023
Great product fast shipping 1651167
by: Andrew08/01/2023
2012 Honda Civic
Great! Easy to install! 1639087
by: Rebecca 12/31/2022
Great fit, feels really sturdy, excellent directions1491877
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.634356
by: mattlo05/22/2017
One year later and everything works well. I had a problem early on where the rubber protection for one of the j clips from the base towers came off. Contacted etrailer and they sent me a whole new assembly direct from Yakima. Thanks for the prompt response and service!383858
by: Greg 06/07/2023
Nicole was beyond helpful!!! 1596000
by: Robert t06/25/2018
After a year, the racks are holding up nicely and still have a solid fit. I only put them on the car when needed. It just takes a few minutes to set them up and go.527071
Yes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install. view full answer...
Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts:
- Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
- Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229
- (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202
With view full answer...
For a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle.
I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16" view full answer...
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum view full answer...
To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV
I have attached a couple of pictures below that will show you what this roof rack looks like and view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit view full answer...
The best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- TimberLine Towers for Yakima Crossbars # Y33TR
I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise.
It is also highly view full answer...
The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components:
Crossbars # Y00429
Feet # Y28TR
Fit Kits # Y06125 and # Y06165
I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft.
Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise view full answer...
I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162.
The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked view full answer...
There is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part view full answer...
The Yakima roof rack you looked at, consisting of the JetStream # Y00426 60 inch crossbars, # Y28TR BaseLine Towers, # Y06102 and # Y06139 clip kits is compatible with your 2016 Ford Edge with the glass roof, according to Yakima. The feet will sit on the painted portion of the roof, not the glass so this is perfectly safe to use.
If you let me know what you're needing to use the roof rack for I can make some recommendations for you! view full answer...
I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof.
For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set. view full answer...
The safest rack system you can put on your vehicle is the highest rated components. I would suggest getting the Yakima HD bars # Y01156 because they have a capacity of 500 lbs. The Baseline towers # Y28TR have a capacity of 220 lbs. You'll need the adapter # Y03541 and BaseClip # Y06188 # Y06189.
This is what you need for your 2021 Honda CRV. I always tell people that when you're planning on putting a tent up on your roof make sure you get a heavy duty system. The bars will be plenty view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
We do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146.
This will give you a complete view full answer...
The Q clips you'd need are no longer available from the manufacturer. To utilize your Yakima bars you would need to upgrade the rack with the following:
Round Bar Adapter # Y03536
BaseLine towers # Y28TR
BaseClip # Y06195 and # Y06196 view full answer...
The best-looking roof rack for your 2013 Lexus ES 350 is from Yakima and you can choose the color of crossbars you want, either black or silver. The rack consists of the following parts but please be aware there are no roof racks that fit your Lexus if it has a glass roof:
- Yakima JetStream Crossbars # Y00425 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06175
- BaseClip Fit Kit # Y06160
And for a wind fairing a good fit for this rack on your Lexus view full answer...
I have a kit that would be perfect for your set up. I would get the BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06152 to get the feet attached to your roof. Then you will need the RoundBar SL Adapter # Y03536 to get your round Yakima Roof Bars secured to your roof rack foot packs.
This kit will look and work the best on the roof of your 2021 Honda Passport since you already have round Yakima roof bars. view full answer...
For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y28TR.
Please refer to the two linked videos for more on this kit and how to install it. view full answer...
We do! The lock kit you need for the Yakima BaseLine Towers # Y28TR can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores. view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
For your 2010 Ford Fusion, I recommend starting with the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars - Aluminum - Black # RR69YR which is a custom fit for your vehicle. Then I recommend using the Rhino-Rack J-Style Kayak Carrier - Folding - Universal Mount # S512 along with the Expansion Arm for Rhino-Rack J-Style Kayak Carrier # RRS512X giving you a secure fit for 2 kayaks on your small roof.
An alternative option is the Inno Kayak Carrier w/ Tie-Downs - J-Style view full answer...
Yakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime.
Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR.
You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars. view full answer...
Yakima Baseline Towers # Y28TR comes with a total of 4 towers.
If you are looking for a complete crossbar system that includes the Yakima Baseline towers, I would be happy to assist you if you confirm your year/make/model of vehicle.
view full answer...
In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
view full answer...
The best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek.
The roof rack for your '20 Escape is made up of:
- Yakima JetStream Crossbars # Y00426 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152
- Same Key System Lock Cores (Optional) # Y07204
The aero shape view full answer...
Since the Baseline Towers # Y28TR are only designed to be used on vehicles with a naked roof you are going to have to switch to the RidgeLine Towers # Y00145 to fit the flush rails on your 2018 BMW X5M. You will also need to get the RidgeClip kit #10 from Yakima as we no longer carry these clips.
I do see your roof will allow for either the 60" # Y00426 or 70" # Y00427 Jetstream crossbars. view full answer...
I do have a roof rack solution for you, but the Yakima Q Towers # Y00135 that you referenced are not confirmed to fit your 2017 Acura RDX.
Although a roof rack isn't necessarily required to carry a roof cargo bag (if that is what you mean by "soft luggage carrier") some people like to have a roof rack anyway for more attachment points and to have the ability to use other accessories.
If your Acura does not have existing rails or crossbars and you would like to use the round crossbars view full answer...
I have a great roof rack solution for your 2017 Acura RDX with a bare roof. Unfortunately, I spoke to my tech at Thule, and the former fit kit that was available for your vehicle (Thule part KIT1724) is discontinued. For this reason, there are no available Thule roof racks that are compatible with your bare roof.
With that being said, Yakima has a similar high-quality roof rack that compares to a Thule system. For that setup, I recommend the following parts:
- Yakima JetStream Crossbars view full answer...
Yes! If you have a bare-roof 2013 Honda Accord Sedan Sport, you need the following setup to mount road bikes:
- Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06148
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06150
With this Yakima JetStream setup, you received the benefits of an extremely aerodynamic system that view full answer...
If you installed a heavier duty roof rack on your 2005 Toyota Corolla like the Yakima HD roof rack part numbers # Y01156, # Y00146, # Y03541, # Y06136, # Y06148 you could use a roof top tent like you mentioned. view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.