Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13333
Our Price: $103.66
Confirmed to Fit
2007 Dodge Ram Pickup
1500 - without factory hitch
2500 and 3500 - without factory hitch
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (811)
- Q & A (0)
- Photos
2007 Dodge Ram Pickup - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 6000
- No Cross Tube
- CURT
- 600
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Dodge Ram Pickup's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13333 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
No drilling required for installation
Complete Towing Package for 2007 Dodge Ram Pickup
Package Price:$224.54
2007 Dodge Ram Pickup Owners Who Purchased This Trailer Hitch Also Bought...
Popular Ram Pickup Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13333
Average Customer Rating: 4.9 out of 5 stars (811 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Michael D05/01/2018
2015 DodgeRam Pickup
I ordered this for a 2003 Dodge Ram 1500 I recently acquired. Very well made! It came complete with all hardware and instructions. I had no problem following the instructions. It took longer to get ready to install the hitch than it did to install it; just about 15 minutes. I also ordered wiring kit C57186 which was perfect for my application. I'll be towing a Jay Feather hybrid with Tekonsha Prodigy RF wireless brake controller and this worked out perfectly. Thanks to Etrailer for making this so easy!
by: Frank M. III10/13/2016
2015 DodgeRam Pickup
Went on without a "hitch"!
But seriously, the hitch went on without a problem. The first one I ordered was welded completely crooked. I was p*ssed! I took pictures and sent them off to customer service. There is no doubt about etrailer's Customer Service Team. They are second to none. My replacement hitch was on its way to me before I even had the crooked one in the mail. The hitch, bolts, nuts and those wires that allow you to pull the bolts and retainer plates through the frame, all quality parts and easily went on. They have instructions and a great video of how to install it on my 2015 Ram 1500. Thank You etrailer for a smooth and pleasant transaction.
by: Randy 03/18/2024
2018 Ram 1500
Built sturdy, looks great. Watched installation video, installed in about 30 minutes. Helps to have 2 people.
by: Anonymous 10/30/2023
Good fit on the truck and wasn’t hard to install, it comes with everything you need to install as well. The paint is holding up really good no chipping or rusting, definitely would recommend this hitch receiver if it fits for your application.
by: Christopher07/09/2023
2005 DodgeRam Pickup
2005 Dodge 1500 V6. 17ft flat trailer. 10ft Dump trailer. I haul no more then 5,000 to 6,000 pounds.
So far the trailer hitch and the receiver has held up well for hauling my two trailers. It installed rather easily with the fishing wire being the only challenge. The only issues is getting the 3/4" hardware to XXX lb-ft. I broke one socket and I don't have a torque wrench that goes that high. Nor could I find a local truck mechanic who did. SO I tightened the hell out of it and hope for the best.
by: Mitch V.09/22/2015
2015 DodgeRam Pickup
Fast shipping. Very well built and easy to install. Had the new hitch on in less than 15 minutes on my Dodge Ram 1500 ST and it looks great.
Mitch V.
9/21/2016
After a year and towing a boat this hitch is still like new. Not a single problem with it coming loose or showing any sign of wear. Am as happy today as I was the day I installed it.
by: Jon. A.. 03/06/2014
2013 DodgeRam Pickup
Awesome. . Perfect fit for my 2013 Ram..Easy to install , especially with all the hardware that's included. I had read previous reviews and noticed a 1/2 inch hex key was needed so I purchased that before the hitch arrived that way I was ready to install. From the time I opened box , dropped spare tire,install and tighten the hitch to jacking back up the spare and being tow ready in 30 min. Thanks etrailer for a great product at a great price.. I am a satisfied customer.
by: Jeff F.06/24/2013
2012 Jeep Liberty
I received a quote from a local truck dealer to install this for $220 and stated it would take a "couple of hours!"
I watched the video on-line and decided to order the part. It arrived in a couple of days and I had it installed in 22 mintues! (4 - 6 mins were to lower/raise the spare tire!)
I used the hitch this past weekend to haul my bass boat!
Ordering a reciever hitch for my wife's Jeep Liberty now (Local dealer quote was $550)
NOTE: Make sure you have a 1/2" hex socket for the bumper bolt.
by: Steven T. 07/23/2015
2015 Ram 1500
Shipped fast. Etrailer support was excellent, there was a concern with my order and it didn't ship on time so they refunded my extra payment for 2 day shipping and still shipped it 2 day. Installation was easy, I didn't even drop the spare all the way to get to the bolt holes through the rear cross bar. Fitment with the spare and in hitch in place is tight. The top bolt barely handled the required torque. Installation was a breeze. Can't wait to use it this weekend.
by: Norman12/03/2019
This product is amazing. Extremely well made and comes with everything you need for an easy installation. The video instructions on there web site are spot on and very simple to follow. I could not be happier with this product. Lowering the spare was the most difficult part of the install but that is Dodges fault for making their spare tire system a joke.
I give this product my highest recommendation!
The entire ordering process could not have been easy and faster. Arrived exactly as advertised I was shocked as to how well made it really is. This is a beast of a hitch. This hitch is far superior to the Mopar hitch the dealer will charge you $275.00 for or $338.00 installed. You won’t be disappointed with this hitch.
by: Thomas 02/02/2024
2004 DodgeRam Pickup
This hitch is high quality and built to last. I think start to finish it took me 20 minutes to install. I am glad I found this and got it so quickly!
by: John 12/23/2022
Great customer service. Fast order processing even during holiday mayhem!
John
12/24/2023
The hitch receiver is working well. No problems. Was a good purchase.
by: Granny L03/30/2017
After reading up on your hitch and it's installation, I was convinced I could do this myself ~ except for not being able to tighten things adequately. [I'm all of 71 yrs young.] Owner of the truck, hubs, Papa Gene at 86 yrs young, has no business groveling on the hard ground on his bad back to do the job ! As he figured [incorrectly] that the spare would have to come off from the undercarriage, he elected to have a more able, [disabled] neighbor do the job. As your instructions indicated, the job took all of 30 minutes, and no, the spare stayed in place. Hubs is ready now, to haul cedar logs to be milled for return so that he may build more furniture!
by: Larry 06/07/2023
I called to ensure I had the right hitch for my truck, came a day earlier than expected and fit perfect. The online installation video was good help and it took me about 20 minutes to install. Very pleased with the hitch and with Quinn with whom helped me select the correct Curt Hitch Receiver.
by: Joseph Newcomb02/12/2018
2015 DodgeRam Pickup
Installed on my 2015 Dodge Ram 1500. I think I spent more time trying to find the 1/2 hex and lowering the spare to give me some room than I did installing the receiver. Ordered on a Sunday, received on Tuesday. Fantastic product, good price, easy installation, I would highly recommend.
by: John W06/04/2020
2019 RAM 1500 Classic
Very fast service, I had my hitch in just 3 days.
Very easy install, took 15 minutes after dropping the spare tire even with hand tools and laying under it in the driveway.
Looks just as good as OEM, if not better.
by: Roy S06/23/2018
2016 Ram 1500
Etrailer did a awesome job helping me get the right hitch for my truck and getting it to me in a really quick amount of time even after a ordering issue. Would definitely use Etrailer again if I need another hitch.
by: Adam05/04/2020
Heavy duty and sturdy. Installed this on my 2019 Ram 1500 Classic Warlock edition.
Came with all the special wires to install the back up mounting plates! So easy to install that it took me about 20 minutes!
by: Angel11/24/2016
2003 DodgeRam Pickup
It was the best and easiest solution for my need, pulled my horse trailer around like nothing and you do not need to be a handle man or mechanic to do this, very easy steps.
by: Gregory03/24/2018
2018 DodgeRam Pickup
Bought this at a great price for my 18 Ram from etrailer. So simple to install. It took longer to lower my spare tire than to install this hitch.
Highly recommend.
by: heatmandan,memphis10/18/2016
2011 DodgeRam Pickup
Was looking for a receiver to fit my 2011 Ram crew cab, E-Trailer had one for a decent price, with a flush under bumper model. Just as advertised, it fit perfect. Very easy to install.(15-20 mins.) Made a great choice in doing business with E-trailer. Delivery was sooner than expected, and the price was good for me. Thanks E-Trailer
by: Will 03/27/2024
The order arrived in great condition and a day early! I highly recommend this company.
by: Tony 10/05/2023
Built well, easy to follow instructions and easy installation. I may have spent half an hour.
by: Tim 04/15/2024
2024 Ram 1500 Classic
Fast shipping , fit perfectly!
by: Tony Caputo10/24/2013
2004 DodgeRam Pickup
Surprised beyond belief, this hitch was perfectly matched, easy to install and look great.
I spent approximately 20 to 30 minutes from opening the box to complete. Hardest part was fishing the bolts down the tubes, but after the first one the second one went like a charm.
Great product will definitely buy from here again.
25
811
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Hitch Recommendation for a 2016 Ram 1500 for Bike RackFor just carrying a bike rack with your 2016 Ram 1500 I would just go with a bumper mounted hitch like the part # 13333. This hitch has been confirmed as a fit for you truck and would work great with your bike rack. I attached an install video for this hitch for you to check out as well.
view full answer... - Installing Curt Class III Trailer Hitch # 13333 on 2008 Dodge Ram PickupThe socket cap screw that is included with the Curt Trailer Hitch Receiver # 13333 referenced in your question will go down through the bumper and thread directly into the hitch. You will simply tighten this screw into the hitch and torque to the specifications listed in the instruction manual. A nut is not needed for this screw. This Class III trailer hitch is confirmed to fit the 2008 Dodge Ram Pickup 1500, 2500 and 3500 without factory hitch. It has a 2 inch receiver opening with a...
view full answer... - Correct Ball Mount Height for 2011 Dodge Ram 1500 4x4 With Curt Class III Receiver # 13333The ball mount needed will depend on the coupler height of your trailer when it is level. The difference in height between your receiver and the trailer coupler will dictate which particular ball mount is needed. You will also want to choose the appropriately sized trailer ball and a ball mount that has a capacity greater than the weight of the trailer you are planning on towing. If you will be towing different trailers that have various heights, an adjustable ball mount might be the best...
view full answer... - What are Curt Trailer Hitch Torque Specs for a 2011 Ram PickupThe torque specs for the Curt Trailer Hitch Receiver # 13333 can be found in the attached installation instructions at the bottom of the page. Sometimes the manufacturer can change the torque settings if they happen to swap out some of the hardware so it is always best to go by the instructions that come with your trailer hitch. I am attaching a sample review video on a 2011 Ram pickup for you to check out.
view full answer... - Does Curt Hitch part # 13333 Fit 2017 Ram 1500 without Factory HitchYes, the Curt hitch part # 13333 is a fit for your 2017 Ram 1500 that does not have a factory hitch. I attached an install video that shows the hitch being installed in a similar 2016 Ram 1500 as yours as well.
view full answer... - Will Top Bolt of Curt Hitch 13333 Rust When Installed on 2018 Dodge RamI certainly can understand your concern for the the top bolt of the Curt hitch part # 13333 being exposed to weather and causing rust potentially. But due to how many of these we have sold and us not getting any feedback that the bolt ended up getting rusted I would agree with Curt and say it's totally fine.
view full answer... - Is Curt Hitch # 13333 Rated for Weight DistributionThe Curt hitch part # 13333 is rated for use with weight distribution systems. This hitch has a capacity of 6,000 lb trailer weight without a WD system and then with a WD system is rated for up to 10,000 lbs. Either way it would have capacity for a 5,900 lb trailer. The bumper towing capacity of your truck is related to if you were to use the ball hole of the bumper to tow from. That said, you should look up the towing capacity of your truck in your owners manual and be sure not to exceed...
view full answer... - Which Trailer Hitches are Manufactured in the USAIt would depend on which hitch manufacturer you're asking about. Hidden Hitch and Draw-Tite Hitches are manufactured in Mexico by Cequent Performance products. They've been around a long time, they make a quality product and they do an excellent job of standing behind their products. Curt Manufacturing builds all their hitches in the USA. B&W and TorkLift also manufacture American-Made hitches, but their applications are primarily for full-sized trucks. Ball mounts and other hitch mounted...
view full answer... - Recommended Trailer Hitch Receiver for 2011 Dodge Ram 1500 Big Horn with Factory BumperWe have exactly the trailer hitch receiver you are looking for on your 2011 Ram Big Horn that already has the factory hitch opening through the bumper. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13333 which installs in that location. I've attached a video to assist.
view full answer... - Will Curt Trailer Hitch 13333 Fit a 2018 Ram 1500?Yes it will! I can confirm for you that the Curt Trailer Hitch # 13333 WILL fit a 2018 Ram 1500 so long as your truck does not have a factory hitch. I have also added a photo for you showing how this hitch looks when installed on an '18 Ram. It's easy to see how this might be confusing but technically there is no such thing as a 2018 Dodge Ram; in 2010 Ram trucks became its own brand, separate from Dodge.
view full answer...
- Trouble Reinstalling Bumper Cap After Installing Curt Trailer Hitch 13333 on a Dodge RamIt seems like some owners can put the cap back on and others cannot after installing Curt trailer hitch # 13333. It is possible that on your truck, and others affected, the hitch is pulled up tighter to the bumper causing the cap not to fit back on. What you can try is to run the bolt in and out a few times to see if it can seat lower in its spot. You can also try changing the order when tightening the bolts because that can affect the position of the hitch. If you have never removed...
view full answer... - Will the Curt Hitch 13333 Fit a 2021 Ram 1500 ClassicYes, the Curt Trailer Hitch Receiver part # 13333 is a confirmed fit for a 2021 Ram 1500 Classic (All Cab Style). It features a simple bolt-on install. The instructions say to return the cap to the owner as it will not be reinstalled. That said, it looks like we were able to snap the cap back into place once the hitch was installed. I only saw one example of the cap not fitting back over the bolt. That said, if the bolt is torqued to spec it should be able to be reinstalled.
view full answer... - How Does Curt Trailer Hitch # 13333 Attach to a 2003 Dodge Ram 1500 Quad CabThe Curt Trailer Hitch, # 13333, for your 2003 Dodge Ram 1500, bolts to the bumper support arm behind the bumper. It requires the removal of the trailer ball hole cap in the center of the bumper. I have included a link to the installation instructions for this hitch that shows pictures and explains the installation steps in detail. Since the bumper and support arm are attached to the frame, the capacity could very well be 500/5,000. The Curt Trailer Hitch attaches in much the same way...
view full answer... - Can Curt Class III Hitch Receiver, Part # 13333, on 2012 Dodge Ram 1500 Tow 19ft Lund Boat & TrailerThe Curt Class III 2-inch Hitch Receiver, part # 13333, carries maximum tongue weight (TW) and gross trailer weight (GTW) ratings of 600/6,000 pounds. (If used with a weight distribution system these ratings increase to 1,000 and 10,000 pounds respectively.) I researched weight estimates on the Lund website and for water crafts of roughly 19 feet in length the combined boat/motor/trailer weight estimates range from about 2400 pounds for an aluminum hull to about 3100 pounds for a fiberglass...
view full answer... - Will a Trailer Hitch from a 2010 Ram 2500 Fit on a 2003 Dodge Ram 1500As long as your 2003 Dodge Ram 1500 was built after November 1, 2002, you can use a trailer hitch from a 2010 Ram 2500. If your truck was built before November 1, 2002, you will need to install a trailer hitch that was designed specifically for that truck. I have attached a link to all of the trailer hitches that will fit your truck if it was built before November 1, 2002 for you to check out. I have also attached a link to all of the hitches that fit both trucks if your truck was built...
view full answer... - Can the Cap for the Curt Hitch 13333 On a 2021 Ram 1500 Classis Be ReinstalledIn regards to the Curt Trailer Hitch Receiver part # 13333, the instructions say to return the cap to the owner as it will not be reinstalled. That said, it looks like we were able to snap the cap back into place once the hitch was installed. I only saw one example of the cap not fitting back over the bolt. That said, if the bolt is torqued to spec it should be able to be reinstalled.
view full answer... - How is the Factory Trailer Hitch Secured on a 2013 Ram 1500 I do not believe the information you were given is correct. On your 2013 Ram 1500, there is a center hole in the rear bumper that can be used for a hitch ball if you do not have the factory trailer hitch receiver installed. If you do have a factory trailer hitch receiver installed then this hole is used for a 3/4" bolt to secure the trailer hitch, not a hitch ball (see photo). If you do not already have a factory trailer hitch and would like to install a similar one, I recommend the Curt...
view full answer...
- Will the Curt Trailer Hitch Receiver Part # 13333 Fit a 2016 Ram 1500Yes, the Curt Trailer Hitch Receiver part # 13333 is a confirmed fit for your 2016 Ram 1500 and will work well for you. This is a direct fit option that will not require any drilling. The installation is also very simple as you can see in the attached video. The hitch is rated for use with a weight distribution system so you will have no worries using it with your Equal-i-zer system.
view full answer... - Will Curt Trailer Hitch, # 13333, Fit 2010 Dodge Ram Crew Cab Sport With Factory Dual MufflersI called the supplier (Curt) and they said the Curt Trailer Hitch, # 13333, will fit your 2010 Dodge Ram 1500 Crew Cab Sport with the factory dual mufflers if it does not have the factory installed hitch. The Curt hitch installs where the factory hitch would be located, so it does not work with the factory hitch. You will need to remove the existing trailer ball hole cap on the bumper because the hitch will attach to the bumper and bumper support with a bolt through that ball hole on the...
view full answer... - What is the Mounting Hole Spacing on Curt Trailer Hitch C13333I went out to the warehouse to measure the hole spacing on Curt trailer hitch # 13333 for you. The holes are spaced 7-3/4 inches apart on center. This is a custom fit hitch designed for the following vehicles: 2004 - 2014 Dodge Ram Pickup 1500 Series, without factory hitch 2003 - 2003 Dodge Ram Pickup 1500 Series, without factory hitch - built After 11/1/02 2003 - 2013 Dodge Ram Pickup 2500 and 3500 Series, without factory hitch 2010 - 2013 Ram 3500 Pickup, without factory hitch 2010 -...
view full answer...
- Can the Factory Hitch of a 2012 Dodge Ram be Removed and Install a Curt Trailer HitchI spoke to my contact at Curt and he informed me that if you were to remove the factory hitch of your 2012 Dodge Ram you could install a Curt Trailer Hitch # 13333 but you would have to leave the bumper beam installed on your truck though to complete the installation. As far as I know the factory hitch of your vehicle is welded on, this might make removal of it more work than its worth, but if you retain the factory bumper beam you would still be able to install the # 13333.
view full answer... - How To Install Curt Hitch 13333 On a 2017 Ram 1500The correct Curt Trailer Hitch Receiver for a 2017 Ram 1500 is part # 13333. The Curt hitch installs using the single hole through the bumper and then with two additional holes on the back. The two oblong holes on either side of the license plate that you can see in the attached photo are the ones that will be used with the Curt Hitch. It's a complete bolt-on install with no drilling required. I have attached an install video for you as well.
view full answer...
- What Size Hex Bit do I Need for 3/4 Flat Head Socket Bolt?When installing the Curt Trailer Hitch Receiver part # 13333 you will use a half inch hex bit or allen. Generally in this case we use an impact type 1/2" hex bit on a large torque wrench. This tend to let us get tot he high torque spec of 320 ft./lbs. required. A 3/4" or 19mm is also required as a heads up.
view full answer... - What Size Bolts Come with Trailer Hitch # 13333The trailer hitch part # 13333 that you referenced is a confirmed fit for your 2009 Dodge Ram 1500 and comes with the needed carriage bolts which are 1/2-13 x 1 1/2.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Andrew L
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank I.
10/14/2017
Ive used it quite a few times. I towed one of my cars to have a new transmission installed, a rented mini excavator twice during the 2017 summer. It is definitely doing its job pulling its weight.