Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2

See what our Experts say about this Optronics Tow Bar Wiring

• Which Tow Bar Light Kit for Flat-Towing 2011GMC Acadia
  The RoadMaster Bulb and Socket Set for Tail Light Wiring Kits, part # RM-155-2, is not compatible with your Acadia lighting system. These incandescent bulbs will not fit in your tail light housing due to the presence of the circuit board that powers the Acadia's LED lights. Also, they would generate much more heat than the specified LED bulbs and might interfere with the nearby circuitry. If you will be towing your vehicle only on occasion, you may want to consider a magnetic towing light...
  view full answer...
• How Strong Are The Magnets On The Optronics Magnetic LED Tow Light Kit?
  Optronics does not have a weight rating for their Magnetic LED Tow Light Kit # TLL21RK, however, this magnet is very strong and has been road tested at high speeds in varying weather conditions. This product is also made from durable polycarbonate, and is sonically sealed to waterproof the lens and housing from weather damage.
  view full answer...
• Adding LED Lights To A Hollywood Racks Sport Rider SE 4
  We have definitely seen customers do this and modify racks like the EasyFold # TH903202 before using the LED kit part # 98174LED and the brackets # BK70BB to mount. You will also need some self-tapping screws # FA1131822, or drill and use the hardware of your choice to mount the brackets. Doing modifications on the Sport Rider SE 4 # HR1400Z can cause a voiding of the warranty so that's worth checking out with Hollywood Racks before taking this on. Another option to consider that doesn't...
  view full answer...
• Least Expensive Way to Carry Two 75 Lb Electric Bikes on 2016 Ram 1500
  I have a suggestion for you, but unfortunately, we're not going to have a hitch mounted bike rack for electric bikes that's going to fit into your budget. Most of our e-bike racks max out at 60 lbs per bike, so your least expensive options are going to be either the Swagman E-Spec # S94FR, with a capacity of 70 lbs per bike, or the Hollywood Racks Sport Rider SE # HLY74FR, with a capacity of 80 lbs per bike -- both over budget. If you're able to utilize your truck bed to carry your e-bikes,...
  view full answer...
  
• Parts Needed to Flat Tow a 1998 Jeep Wrangler
  To flat tow your 1998 Jeep Wrangler, you will first want to install a base plate kit like the Roadmaster EZ4 Base Plate Kit, # RM-521424-4, for Wranglers with a double tube bumper. It is not recommended to tow the Jeep Wrangler by the bumper alone. The base plate kits bolt to the frame of the Wrangler to provide a more secure attachment point. If you want to stick with the Tow Ready tow bar, you will want the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, # RM-025. Keep in mind,...
  view full answer...
• Parts Needed to Flat Tow a 2013 Ford Fusion SE Hybrid Without Adaptive Cruise Control
  Flat towing a vehicle requires 5 basic components: tow bar, safety cables, wiring harness, base plates and a supplemental braking system. If mixing brands of base plates and tow bars then an adapter may also be needed. We offer RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 that will require the Roadmaster Tow Bar Quick Disconnect Kit # RM-201. With this adapter and disconnect kit you can use Roadmaster base plates # RM-524434-4 along with your Demco Kar Bar...
  view full answer...
• Will Blue Ox Tow Bars work with Roadmaster Baseplates for a 2015 Nissan Versa Note Canadian Version
  The Roadmaster base plates # RM-52357-4A and # RM-52357-5 are currently the only base plates that will fit your 2015 Nissan Versa Note Canadian version. The U.S. and Canadian versions are made the same. The # RM-52357-5 will sit further back than the # RM-52357-4A, but it is not compatible with a tow bar adapter. If you plan on using a Blue Ox tow bar like the Avail # BX7420, then you will need a Roadmaster base plate to Blue Ox adapter # RM-032 along with the Roadmaster base plates #...
  view full answer...
• Base Plates and Lighting Needed to Flat-Tow 2013 Chevrolet Captiva Sport LTZ
  We offer base plates for your 2013 Chevrolet Captiva Sport LTZ from both Roadmaster and Blue Ox, but since you have a Roadmaster tow bar you'll be better off with Roadmaster base plate # 3151-1A as long as your Captiva Sport does not have the brush guard. If you do have the brush guard you can instead use Blue Ox base plate # BX3332. Both will require some trimming of the spoiler, air dam, grill or plastic fascia. If you use the Blue Ox base plates you'll also need an adapter to mate them...
  view full answer...
• Base Plate Kit Recommendation for a 2002 Saturn S-Series for a Roadmaster Falcon 5250 Tow Bar
  Since you already have the Roadmaster Falcon 5250 tow bar, I recommend using Roadmaster base plates. You could use Blue Ox base plates, but you would have to use an adapter between the tow bar and the base plates. If your Saturn is a 4 door sedan model, then I would recommend the Roadmaster Classic Base Plate Kit, # 154-2. If you have a wagon or 2 door coupe model, then I recommend the Roadmaster EZ Base Plate Kit, # 52181-1. I frequently find that the Quick Disconnect Base Bar Assembly,...
  view full answer...
• Tail Lights Covered By Bike Rack Solution
  The lights on the Demco Tow Lights w/ Wiring Harness # DMKKLB do not adjust from the vertical 180° position. The feet on # DMKKLB do adjust positions left and right for different angles. I recommend using the Roadmaster Standard Magnetic Tow Lights # RM-2120 to alleviate your blocked tail lights. The harness plugs into your 4 way flat trailer harness and uses magnetism to secure to the back of your vehicle. If you have nothing for the magnets to stick too, you can use # 3378895404 to fix...
  view full answer...
• Recommended Temporary Brake Lights For 10 Foot Box Truck
  I recommend to use Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness part # TLL21RK which plugs into a 4-way connector on the truck. The lights will act as running, brake lights and turn signals once plugged in. However, they are designed for flat towing a vehicle so you may consider checking into the laws of your state before using these on the box truck just to be safe. If you do not have a 4-way connector please let me know the year make and model of the truck...
  view full answer...
• Parts Needed For 1996 Jeep Grand Cherokee Base Plate Recievers
  It sounds like you have most of what you need to flat tow your 1996 Jeep Grand Cherokee. To flat-tow any vehicle you need base plates, tow bar, safety cables, wiring for lights, and braking system. The base plate you have is the Roadmaster XL, Item # 1528-3. Unfortunately, this base plate kit is not a confirmed fit for your vehicle. Each towed vehicle needs specific plates that mount to it so that the flat-towing is safe for it and the RV. The Roadmaster XL Base Plate that is a confirmed...
  view full answer...
• Parts Needed to Flat Tow 2002 Chevy Suburban 1500 Behind a Motorhome
  Flat towing a vehicle behind a motorhome requires a few components. The linked article covers each of these items, which include the tow bar, safety cables, a wiring/lighting solution, base plates, a braking system and often a high/low hitch adapter to keep the tow near level when connected. The vehicle to be towed also has to be compatible with this method of transport. The vehicle owner's manual will tell you this (usually under the index heading 'recreational towing'). I checked an...
  view full answer...
• Sway Control Activates On 2015 Ford F-250 When Flat-Towing 1999 Jeep Wrangler
  If you have anti-sway on your 2015 F-250, adding weight to the rear of the truck may not keep the system from becoming activated. The best solution would be to go slower when driving on roads with uneven surfaces. The # RP66022 you came from is a weight distribution system that is intended to be used with trailer towing and is not designed to flat-tow a vehicle. There are 5 items needed when you flat-tow a vehicle. If you do not have all the items needed I will make some recommendations...
  view full answer...
• Most Economical Options for Flat Towing 1998 Chevrolet Express Van with 2000 Chevrolet Truck
  To start, I have included an article which covers the 5 basic components required for flat towing. I will cover each of these for your 1998 Chevrolet Express Van. Since you mention that this will most likely be for one time use, I will offer the most economical options available. 1) Tow Bar - RoadMaster Falcon 2 Tow Bar, # RM-520. This tow bar has a 6,000 lb capacity and works with all Roadmaster vehicle-specific base plates, EZ, MS, MX, XL and standard. 2) Base Plate Kit - Roadmaster...
  view full answer...
• Base Plates for 2006 Ford Escape Hybrid 4x4 to Use with Roadmaster Falcon 2 Tow Bar # RM-520
  The recommended Roadmaster base plate kit for your 2006 Ford Escape Hybrid is their XL Type which features removable draw bars, part # 4406-1. The included draw bars are held in place with hitch pins and when removed the vehicle's original appearance will be largely maintained. These base plates will require some trimming of the front fascia components for installation. The other draw bars from the base plates from your last vehicle, part # RM-52357-4A, use a different attachment method...
  view full answer...
• Is a Base Plate Kit Available Without the Removable Arms for a 2001 Chevrolet Tracker
  All of the base plate kits we sell come with the removable arms. Base plate kits are made with a specific set of removable arms at the factory, so no set of arms is completely identical. The frame bracket mounts of the base plate kits are not available separately from the removable arms. With that being said, the Roadmaster XL Base Plate Kit, # 1012-1, is compatible with your 2001 Chevrolet Tracker and it will come with a set of removable arms that were designed to fit that kit. Keep...
  view full answer...
• Why Can Optronics Magnetic Tow Lights Only be Used with Vehicles Under 80 Inches
  There are certain lighting requirements for vehicles or trailers that are over 80 inches wide that magnetic lights such as # TLL21RK cannot provide. You would need front and rear clearance lamps that are mounted at a 45 degree angle (PC rated). So if the back of the vehicle was a square for example, the light would be at the corner pointed half way between the side and the rear of the vehicle. They need to be placed as high as possible. You also need rear identification lamps (3) centered...
  view full answer...
• Can Roadmaster Base Plates Be Used With Blue Ox Aventa Towbar To Tow 2013 Honda Fit
  In order for you to be able to use your Blue Ox Aventa Tow Bar BX7335 with the Roadmaster EZ Base Plate Kit, part # 521190-1, you will need to use an adapter. We carry the Blue Ox Tow Bar to Roadmaster Standard, EZ and XL Base Plates Adapter, part # BX88178 that will work for your towbar and the Roadmaster base plates. Since you have a towbar, you may be familiar with towing a vehicle, but in case you are new to flat-towing I have attached some helpful articles that explains flat-towing...
  view full answer...
  
• Recommended Items to Flat Tow 2015 Buick Enclave Behind 2008 Winnebago Tour RV
  Flat towing a vehicle such as your 2015 Buick Enclave requires 5 basic components. These are a tow bar, safety cables, a lighting kit, and base plates and a supplementary braking system for the towed car. Each is covered in the helpful article I have linked for you. You will want to check your Enclave owner's manual (usually under the heading recreational towing) to make sure that your particular car can be flat towed and what preparation steps, if any, are needed to make it ready. Some...
  view full answer...
• Flat Towing Wiring Harness for 2010 Chrysler Town and Country Limited
  The options for wiring/lighting kits for towing the van behind your Beaver motor coach can be seen by clicking on the link provided. The Beaver website does not include wiring diagrams for its Class A, B, C or 5th wheel RVs but I was able to find a wiring diagram for the van by doing a Google search on the phrase '2010 Chrysler Tow and Country wiring diagram'. This may well also appear in your owner's manual. These choices include diode kits like the Roadmaster # 154-792-118158 and magnetic...
  view full answer...
• Compatibility of Roadmaster Falcon Tow Bar RM-520 with D-Ring Bumper Mount kit RM-035
  Both the Roadmaster Falcon # RM-520 and Falcon 2 tow bars, among others, are compatible with the Jeep D-Ring Bumper Mount kit # RM-035. The kit fits your 2014 Jeep Wrangler that has the off-road bumper with 3/4 inch thick D-Ring bumper mounts. Safe and legal flat towing a vehicle also requires other components, including a wiring/lighting kit, safety cables, a supplemental braking system and also often a high/low hitch adapter to keep your tow bar within 3-inches of level. The linked article...
  view full answer...
• Availability of Adapters to Mate Blue Ox Baseplates with Roadmaster Tow Bar
  We do offer one set of base plates from Blue Ox that fit the non-Denali 2007 GMC Envoy, part # BX1709. While we do offer adapters to mate different brands of tow bars and base plates, the adapter required for your tow bar is rated only to 5000-lbs and your Envoy's gross weight is roughly 6400-lbs according to my research. Your solution will be to use a new Blue Ox tow bar that is directly compatible with these base plates. The most popular Blue Ox tow bar that is compatible with this base...
  view full answer...
• Flat Towing 2003 Chevrolet TrailBlazer Behind Class A Motorhome with 5000-lb-Rated Hitch
  If your Class A motorhome's hitch is rated for 5000-lbs, then this limit applies whether you are using a tow dolly or a tow bar for flat towing. As long as your TrailBlazer's gross weight is within the hitch (and motorhome) towing capacity then you can tow the vehicle. There is an important difference between dolly towing and tow bar towing. A tow bar puts almost no tongue weight load on your hitch (its pretty much just some of the weight of the tow bar) while a tow dolly will still put...
  view full answer...

Do you have a question about this Tow Bar Wiring?