Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
Item # TL21RK
Retail:$80.99
Our Price: $39.94
You Save: 51%
Confirmed to Fit
2010 Ford Fusion
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (146)
- Q & A (0)
- Photos
2010 Ford Fusion - Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Removable Tail Light Kit
- Bypasses Vehicle Wiring
- Magnetic Mount
- Universal
- Optronics
Get lights for towing your Ford Fusion without splicing into its wiring. Magnetic light kit provides a pair of stop, turn, and tail lights. Mounts using large, heavy-duty magnets for increased stability. Plugs in at rear of your motor home.
Features:
- Light kit allows you to bypass your vehicle's wiring to provide temporary lights for your towed car
- Can also be used as trailer lights
- 2 Red lights act as brake, tail, and turn signal lights
- Magnetic bases let you easily mount lights on trunk or roof of your car
- Large, heavy-duty magnets provide excellent stability
- Wishbone-style wiring harness can be easily routed beneath car
- 4-Pole flat connector on harness is designed to hook up to your RV's 4-way trailer connector
- Separate, 3' long harness with 4-way can be wired into tow vehicle or RV if no trailer connector is present
- Includes quick-splice connectors for simple installation
- Department of Transportation compliant
Specs:
- Wiring harness length: 20'
- Wire length between lights: 4-1/2'
- Separate wire with 4-way for tow vehicle: 3'
- Bulb type: 2057 double filament
- 3-Year limited warranty on housing and wiring only
A towed car is required by law to have functional brake and signal lights that illuminate at the same time as the brake and signal lights on the RV that is towing it. Most wiring kits require you to splice into your vehicle's electrical system to install diodes, but doing this can void your manufacturer's warranty. You also run the risk of making a mistake during installation that could result in potentially damaging electrical feedback. Magnetic tow lights eliminate this problem because they bypass your car's electrical system entirely and leave your wiring intact. Just mount the lights on your vehicle's trunk or roof with the heavy-duty magnetic bases. Then run the wiring harness up to the front of your towed car, across your tow bar, and then connect it to the 4-way flat on your motor home or tow vehicle. If your tow vehicle doesn't have a 4-way, an adapter is required.
This kit includes a 20' long wishbone-style wiring harness with a 4-way flat connector on the end. A separate 3' wiring harness with a 4-way plug can be used to install a 4-way on your tow vehicle or RV if it does not already have a trailer connector. Quick-splice connectors are included if needed. A 4-1/2' long harness connects both lights, giving you enough slack to position the lights where you want them.
TL21RK Optronics Magnetic Mount Stop, Turn, and Tail Towing Light Kit w 20' Wiring Harness
Alternate part number: TL-21RK
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector - TL21RK
Average Customer Rating: 4.7 out of 5 stars (146 Customer Reviews)
Get lights for towing your vehicle without splicing into its wiring. Magnetic light kit provides a pair of stop, turn, and tail lights. Mounts using large, heavy-duty magnets for increased stability. Plugs in at rear of your motor home.by: Steven 01/28/2024
Overall it worked fine. Easy to use. We did encounter some high winds that twisted the light sideways once. Magnet strength otherwise is strong enough.
by: Kent 12/18/2023
2003 Jeep Wrangler
A very easy way to light my jeep when towed without having to cut into the jeeps wiring system.
by: Robert 07/24/2023
Thank you for the quick service. I appreciate that they were able to accommodate my need of replacing my wiring harness.
by: Steven 02/03/2024
Haven’t used them yet but they look good and I’m sure they will do the job.
by: Crawford C.04/23/2023
This didn't work out of the box! The passenger side would not function at all. No tail, brake, or turn signal. Etrailer is issuing a return for refund. I had to leave for a camping trip, so I went to Harbor Freight and purchased an LED set for a little over half of what these cost; and these aren't LED.
by: Steelhead07/11/2015
1983 Jeep CJ-7
works great for towing my jeep. just plug the four flat into the factory trailer wiring on the tow vehicle, set the lights on the bumper and they work perfect. the magnets are strong but the thicker the metal they are on the better they hold. steel on my bumper is thick enough for a strong hold but I tried thinner metal and the hold is weaker so you may need to add some straps
by: Ed F06/09/2017
The product arrived quickly and was exactly as advertised. The light kit is the perfect solution for the car I tow behind my RV, but also use by itself. I like the fact that it is totally portable, mounts high up on the vehicle for good visibility and is quick and easy to install when needed.
Ed F.
6/9/2018
Worked perfect. I have since gone to anew vehicle with integrated light wiring. I sold the lights to a friend and he has been happy since!
by: Tim C05/29/2020
Honda
I am very happy with this purchase. The magnets in the base of the lights keep them connected to the roof of our towed car, no wobbling! The signal wire is long enough to run through our 2019 Honda Fit and connect with our tow vehicle. After getting wet several times, the protective sticker on the bottom of the lights wore off and now the lights have left slight scratches on the roof of the car, nothing major. On the roof of our towed car, they are seen from a distance and work with the tail lights of our motor home just fine.
On occasion, we have to wiggle the wire coming out of the light to get it to work, but this is after a year’s worth of intermittent towing and I’m pretty sure we bashed them around a little. Great product at a great price, professional installation is not necessary. A little better construction and this would be a 5 star rating.
by: Nick08/25/2012
2008 Honda CR-V
I am using these for added visibility on the back of a large bike rack that pretty much stays on the car all the time. I do not suggest using the magnets as the only form of attachment as they are not strong enough to keep the lights attached when going over bumps. I zip-tied them to the frame of the bike rack. At first, I had them sticking out from the bottom of the rack, and they were fine until I went up a steep hill and one of the lights got knocked off on the road. These lights are extremely well-built because instead of snapping the light, the rather large zip-ties broke. The light still works great after the incident. I now have them sticking out the sides to give more ground clearance, and they seem to be doing fine. For my application, I had to replace the wire between the lights with a longer one, but that was not difficult and will not be necessary in a typical application. At least the lights are easy to disassemble to access the wiring. The only way these could be improved would be to add strong neodymium magnets and to make the red lenses screw on (instead of snapping on) for easier access to the bulbs for replacement. Otherwise, a perfect product.
For the record, I did not need to use the included vehicle wiring harness or splice connectors, since my application required an electronic light controller.
by: Amy11/27/2017
The magnets didn't stay on the car so I ended up permanently gluing them to my roof since we tow our car behind the rv full time. Had to replace the bulbs with LED bulbs since our rv tail lights couldn't supply enough voltage to the incandescent bulbs to see them in daytime. This isn't a failure of the product but rather an undiagnosed voltage problem with our rv. With those modifications I am happy with it.
by: Big Donald01/14/2021
I got this because the lights on the trailer for my 15' Boston Whaler kept getting broken while launching. Now, I just have to hook these on before I hit the road (easily by magnet) and I can take them off before risking damage while launching. Perfect! Just make sure the wire is long enough. It just fits my little trailer, but a longer one may need an extension wire harness.
by: Doug Q05/28/2013
Perfect, just what we needed to get our trailer home from storage so I could work on the finding the root cause for the failure of the permanent trailer lights. Now that the permanent lights have been fixed, the temporary magnetic lights are stored with the trailer sort of like a spare tire, knowing how fiddly trailer wiring can sometimes be. It's worth the small investment for the extra measure of safety in case the permanent trailer lights fail again far from home.
by: Bo01/03/2013
Everything needed for my application. Easily moved from tow dolly mount to fender of vehicle being towed.
Bo
7/4/2014
One-and-a-half years later I am still using the tow lights regularly and they still work and look great!
by: Michelle08/01/2017
etrailer was easy to order from and shipping was fast. However, I ordered this specific light set to fit my standard 4-way flat connection that already exists on my trailer and did not plan on doing any wiring on my truck. Unfortunately, it does not fit. I will have to buy a converter or something I guess. I emailed them with this issue asking if this light is not a standard 4-way flat and haven't received a response.
Seems to be a nice sturdy light set. Doesn't help when I can't use it, though.
by: tfs07/04/2016
Strong magnets hold the lights in place even on a bouncy trailer. Lead wire length is sufficient for the average towing vehicle or trailer. My only complaint is that the wire length between the two lights needs to be a foot longer for my uses.
by: Steve S-omaha09/17/2016
After struggling with my trailer lighting system for years, I gave up and bought a portable system from etrailer. Within 5 minutes of unwrapping it, everything worked great and I am not longer spending hours trying to trouble shoot the old system. The magnets that hold the lights on the trailer are very strong, but I still use a bungy cord on each one just in case I hit a large bump in the road.
Thanks etrailer, excellent product!
by: Michael L.01/06/2012
I purchased a Curt hitch for my 09 CRV. I also bought a wiring harness and a set of magnetic lights for attachment to vehicles. I was able to install the hitch in less than an hour. It took me 30 minutes to connect the wiring. The lights are very simple to connect and only hook up one way. The instructions included links to videos that made the job a snap. The instructions said to put the wiring inside the car by the spare tire when not in use to preserve the connector. what a great suggestion! I did not put a single mark on the car and the hitch looks great.
by: Dennis 03/23/2021
Ford Ranger
Nice magnetic set. I bolted small steel pieces to my ranger bumper because it is covered in plastic. An easy hack located them just wide of the tailgate so it could open with lights in place. Drove 1200 miles with no problems.
by: Richard12/27/2017
Jeep Liberty
They say that a company is only as good as its employees... Well, etrailer is extremely fortunate to have someone like Shawn B. Working for them! This young lady got me out of a really frustrating predicament, and through careful listening and asking the right questions, she saved me not only a ton of money, but a whole bunch of frustration as well! My dilemma was that I had purchased a Jeep Liberty with a Blue Ox base plate, but I had a Blackhawk 2 tow bar! I thought I was going to have to go out and buy a Blue Ox tow bar to use with the Blue Ox base plate, but through careful review of my situation, and a calm analytical approach, this young lady determined exactly what I needed in the way of adapters and a towing light set up! Today, more than ever, it's all about customer service, and that is exactly what she provided for me!
by: Matthew08/10/2021
Used on tow car over the last year - towed at slight angle via tow-dolly. Driven 1000's of miles with this on the tow car through rough storms and strong winds - have not experienced an issue. Strong magnets have not scratched the vehicle. Would purchase again.
by: James 07/14/2020
Ford Five Hundred
Excellent service, product as promised, little modifications required to fit my Fiat 500.
Only on problem, takes a long time to wait on the phone for customer service
Jame W.
7/15/2021
Fantastic, wiring needs s little workcomments previously sent
by: Jason H08/23/2020
Plenty of cord. My only desire would be the magnets be on the back of the lights, not the bottom. But I made it work. Used this to make my bike rack euro compliant for lighting.
by: Carl J10/24/2018
2013 Jeep Wrangler Unlimited
Strong magnets. I needed an extension to plug the lights into the tow vehicle. The wires could be longer between the lights.
by: Nick07/02/2022
1994 Jeep Wrangler
This lighting kit is just what I needed to pull my Jeep behind my motorhome .
I hooked it up for a test ride and only 1 turn signal worked. When I took the light apart
I found loose wire that was not captured in the wire nut. ( wire nuts are for home construction)
If this item had been built to automotive standards it may have worked without a repair.
I'm not Impressed !
25
145
Show More Reviews
See what our Experts say about this Optronics Tow Bar Wiring
- Tow Bar and Base Plates for 2011 Ram 3500 and 2011 GMC Sierra 3500We have a lot of great solutions for towing your 2011 Ram 3500 and your 2011 GMC Sierra 3500. For your tow bar, I recommend the Roadmaster BlackHawk 2 All Terrain Non-Binding Tow Bar # RM-422. This tow bar can tow up to 10,000 lbs and features non-binding crossbars to make disconnecting easier. Now for the base plates. For your Ram, I recommend the Roadmaster # RM-293-3. For your Sierra, my recommendation depends on whether you have tow hooks or not. If you do, I recommend the Roadmaster...
view full answer... - Parts Needed to Flat Tow a 2006 Mini CooperWe do have the parts needed to flat tow a 2006 Mini Cooper, but you will want to start off by checking your owner's manual to make sure that your specific model and engine can be flat towed. If it can, then you will need a base plate kit, tow bar, safety cables, vehicle tow bar lighting, supplemental braking system, and most likely a high-low adapter. By base model I assume that you have a Hardtop model. If that is the case then you will want to use the Blue Ox Base Plate Kit # BX1303....
view full answer... - Can a 1999 Chevu Suburban K2500 Be Flat TowedAccording to my research you can flat tow your 1999 Chevy Suburban, but you'll want to confirm this in your copy of the owner's manual. Here are the parts I recommend in order to flat tow your vehicle: - Roadmaster Direct-Connect Base Plate Kit # 3101-1 (if your vehicle doesn't have coil springs) - etrailer SD Non-Binding Tow Bar # e74ZR - Heavy Duty Magnetic Tow Lights # TL21RK - Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494 - High-Low Adapter (see attached article)
view full answer... - Can TL21RK Magnetic Tow Lamps Be Plugged into 5-Pole Trailer Connector on MotorhomeThe 5-pin connector can indeed be used for the # TL21RK magnetic tow lights, if it's active. You can use a circuit tester like # PTW2993 as a helper activates each taillight function to confirm the 5-pin connector works. I've linked to a video showing my buddy Jameson demonstrating how to use the tester in case you're not familiar with how they work.
view full answer... - Are Replacement Lenses Available For Magnetic Tow Lights?The Heavy Duty Magnetic Tow Light Set # 337TL257M, along with all of our magnetic tow lights, do not have replacement lenses available. Your best option is to replace the lights with the Heavy Duty Magnetic Tow Light Set # 337TL257M. These lights include a 30' wiring harness with a 4-pin trailer connector, has light dimensions of 4-1/2" in diameter x 3-1/4" thick, and has a carrying case which makes transporting and storage easier.
view full answer... - Recommended Base Plates And Flat Towing Accessories For 2008 Saturn AstraWe do have a baseplate that will fit your 2008 Saturn Astra. It is the Blue Ox Base Plate Kit - Removable Arms # BX3333. This base plate kit will require the bumper fascia to be removed and will require some trimming. There are adapters needed to make these baseplates work with your Falcon Roadmaster All Terrain Tow Bar # . You can use the Roadmaster Tow Bar to Blue Ox Brackets Adapter # RM-031 or the Blue Ox Base Plate Adapter Brackets for Roadmaster Tow Bars # BX88151. If you...
view full answer... - How to Add Magnetic Lights to Vehicle on Tow DollyYou can certainly just splice the harness from the magnetic lights to the appropriate light circuit wires on your tow dolly instead of adding a new plug on the RV. This setup would activate the magnetic lights just the same as running the wiring to the RV. To do this I recommend the Optronics # TL21RK that includes a separate 3 foot long 4-Way extension so that you can easily splice into the wires. I have attached a short video demonstration on this kit that you can check out as well.
view full answer... - Base Plates, Tow Bar & Related Flat Towing Items for 2005 GMC 2500hd Duramax DieselFlat towing a vehicle behind a motorhome requires a number of components including the tow bar, base plates and supplemental braking system. These and the other required components are detailed in the linked overview article on flat towing. Two additional articles are provided too for braking systems and high/low hitch adapters. Our installers like the Blue Ox kits for their consistent fit so I recommend for your GMC Sierra (or Silverado) 2500 the base plate kit # BX1660. This includes...
view full answer... - Is Tekonsha 118496 Trailer Wiring Harness Compatible with Optronics TL21RK Magnetic Tow LampThe Optronics # TL21RK magnetic tow light kit would indeed be compatible with the 4-pole connector provided by the # 118496 trailer wiring harness which is a confirmed fit for your 2010 Toyota Tacoma. I'll link to a video showing the # 118496 being installed on a 2010 Toyota Tacoma.
view full answer... - Recommendations on Flat Towing a 2017 Honda Fit with a Manual Transmission.According to the Owner's Manual, the 2017 Honda Fit is towable behind a motorhome if it has the manual transmission. The Continuously Variable Transmission (CVT) model cannot be flat towed. The base plate that I recommend for the Honda Fit is the Blue Ox Base Plate Kit # BX2261. The Blue Ox base plate is a custom fit piece that is hidden beneath the vehicle's body. Blue Ox also provides all the hardware needed. Blue Ox does state that the bumper fascia will have to be removed and some...
view full answer... - Parts Needed to Flat Tow a 2011 Honda Fit With RoadMaster Sterling Tow BarTo flat tow your 2011 Honda Fit you will need a tow bar, base plates, safety cables, lighting, and supplemental braking. The Blue Ox Base Plate Kit, part # BX2253, will fit your Honda Fit, but since you already have the RoadMaster Sterling tow bar, I would recommend the RoadMaster EZ Base Plate Kit, part # 521190-1. The RoadMaster base plate kit will install a little easier and it will not need any adapters to attach the base plates to your RoadMaster tow bar. I am including a link to...
view full answer... - Parts Needed To Flat Tow A 2023 Lincoln Navigator Since Roadmaster doesn't currently have a baseplate for the 2023 Lincoln Navigator you'll have to use a different branded baseplate and an adapter to connect to your Nighthawk Tow Bar # RM-676. You could use the etrailer Invisible Base Plate Kit # e86YR along with the adapter # e98984. At this time no manufacturers have been able to confirm if diode kits would be compatible with the factory wiring of the vehicle so all I can recommend is the Heavy Duty Magnetic Tow Lights # TL21RK to...
view full answer... - Base Plates and Accessories to Flat Tow a 1997 Suzuki SidekickIn order to flat tow the vehicle, you would need the tow bar, base plates, wiring for the vehicle tail lights, safety cables and a supplemental braking system, depending on the state you were planning on towing the vehicle through. Since you already have a tow bar, you would start with a base plate. Blue Ox does not offer a base plate kit that is compatible with a 2WD 4 door model Sidekick, but there is a Roadmaster Base Plate Kit, part # 1007-2 that will work, as long as your Sidekick...
view full answer... - Cost Effective Parts Needed to Flat Tow a 2004 GMC EnvoyIt sounds like you're looking for a cost-effective kit for flat towing your 2004 GMC Envoy. In addition to the Blue Ox Adventurer Tow Bar # BX7322 (which is rated high enough for your Envoy if you don't load it up with cargo) you'll need the following: Blue Ox Base Plate Kit - # BX1709 Blue Ox Safety Cables - # BX88196 Magnetic Tow Lights - # TL21RK Blue Ox Braking System - # BLU37TR This includes all of the equipment you need to flat tow your Envoy.
view full answer... - Recommended Parts to Flat Tow a 2001 Volkswagen New BeetleFor a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter for your 2001 Volkswagen New Beetle. Here are the parts I recommend for your vehicle because they are more cost-effective and easier to install: Base Plate Kit - # 521225-1 Tow Bar - # e44ZR (includes safety cables) Wiring - # TL21RK Brake System - # HM39494 High-Low Adapter - See attached article (bar mount height...
view full answer... - Can 2002 Toyota 4Runner be Flat Towed behind MotorhomeWe've looked into this before and found that if you install a driveshaft disconnect on your 2002 Toyota 4Runner you can flat tow it but this is the only product for your vehicle we don't offer. For a base plate for the 2002 Toyota 4Runner 4x4 I suggest the Blue Ox kit # BX3736. This will directly accept their Alpha tow bar # BX7420 which includes the required safety cables, saving you that separate expense. For a lighting kit I suggest inexpensive magnetic lights like # TL21RK which...
view full answer... - What Parts Are Needed for Flat Towing a 1997 Suzuki Sidekick with Automatic TransmissionThe best way to confirm your Sidekick's suitability for flat towing is to check the owner's manual under the heading recreational towing or by checking with your local dealership using your VIN number. Generally, a vehicle with automatic transmission is less likely to be flat-towable and may require use of a tow dolly like the Roadmaster # RM-2050-1. Other cars may need special preparation steps before towing them wheels-down. Your manual/dealership will clarify this for you. My online...
view full answer... - Parts Needed to Flat Tow a 2000 Dodge Caravan with Roadmaster 5250 Tow BarWe definitely have the parts you need to flat tow your 2000 Dodge Caravan using your Roadmaster Falcon 5250 tow bar! For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Here are the parts I recommend using: Roadmaster Crossbar-Style Base Plate Kit - 4-Cylinder # 242-1 or 6-Cylinder # 242-2 engine Safety Cables - # BX88196 Heavy Duty Magnetic Tow Lights - # TL21RK Brake...
view full answer... - Troubleshooting Magnetic Light Kit for Blinkers Not Working CorrectlyI would check the connector of your tow vehicle and test it for voltage with a circuit tester like our # PTW2993. A magnetic towing light kit like the Optronics Tow Bar Lights # TL21RK that you referenced should be able to provide any and all tail light functions when installed correctly. It sounds like the problem is in the trailer connector of your tow vehicle. Using the # 3808 you should test for voltage on the 4-way on all of the circuits to make sure that your vehicle is wire correctly....
view full answer... - Tail Light and License Plate Solution for Transporting Covered BikesThe best solution we have is to use the Thule License Plate Holder # TH35JV for the license plate part of your problem and then adding magnetic towing lights like the Wireless Hopkins # C6304 (you need 8 AA batteries # DU58QR) or Optronics # TL21RK so your tail lights are still visible. Since your Swagman XC2 Bike Rack # S64650 will be covered with the bag you'll need to get creative with the mounting straps for the Thule License Plate Holder but it's the best option for your application. To...
view full answer... - Base Plates for a 2003 Jeep Wrangler to Work With Roadmaster Falcon 2 Tow Bar # RM-520We offer a Roadmaster base plate option for your 2003 Jeep Wrangler. Roadmaster # RM-521424-4 fits the version with the double-tube bumper. This EZ4-series base plate is fully compatible with your Falcon 2 Tow Bar # RM-520 without need for any sort of adapter. In addition to the tow bar and base plates flat towing requires safety cables, a wiring/lighting solution and a supplementary braking system. Each of these items is covered in detail in the linked article. For safety cables I suggest...
view full answer... - Recommended Lighting Solution for Flat Towing 2017 Jeep Cherokee TrailhawkFor your 2017 Jeep Cherokee Trailhawk, I recommend the Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247. This kit will allow you to wire your Jeep to accept the RV's tail, brake and turn signal lights for flat towing. It also includes enough coiled wire to go directly from your Jeep to the RV. This type of system will certainly provide a more permanent lighting solution than magnets lights like # TL21RK that you referenced in your question. I have attached a short video...
view full answer... - Recommended Base Plate Fit for 2005 Jeep Wrangler with U-Channel BumperThe correct Blue Ox base plate for a 2005 Jeep Wrangler with a u-channel type front bumper is their kit # BX1118. Their kit # BX1124 only fits right-hand-drive models with a double-tube bumper. Flat towing also requires a number of other component parts, including the tow bar, safety cables, a wiring/lighting kit of some kind, a high/low hitch adapter and a supplementary braking system for the towed vehicle. All of these items are covered in the linked articles on flat towing. The tow...
view full answer... - Parts Needed to Flat Tow 2012 Ford EdgeWe can get your 2012 Ford Edge set up to flat tow behind your motorhome, and you'll need a number of different parts to do this - base plates, a tow bar, safety chains, wiring, and a supplemental braking system. I'll go over the parts you'll need for your 2012 Ford Edge, starting with the base plates. The correct base plates for your '12 Edge are going to depend on if it has the EcoBoost engine and adaptive cruise control or not. With or Without EcoBoost Engine - Without Adaptive Cruise...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Tyler C
Updated by:
Tricia G
Updated by:
Adele M
Updated by:
Brian T
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Installed by:
Andrew S
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steelhead
7/11/2016
one year later and still working perfect