Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Tow Bar Wiring

• Parts Needed to Flat Tow a 2014 Hyundai Accent
  I did some checking and it looks like the 2014 Hyundai Accent is only flat towable if it is the manual transmission model. The 2014 Honda Fit can be flat towed with either transmission style but it is not recommended to exceed 65 miles per hour. I would recommend consulting the owners manual of either vehicle or contacting a dealership to be sure. We only carry base plate kits for the Hyundai Accent though. So that might be the deciding factor. If you were to get a manual transmission...
  view full answer...
• Magnetic Tow Lights Stay on When Connected to 4-Pole Connector on Tow Vehicle
  It sounds like you have already been doing some troubleshooting which helps to narrow down the possibilities for us. What I recommend doing is testing both sets of lights with another vehicle. Even though it is unlikely that 2 sets of magnetic lights would be malfunctioning the exact same way at the same time, it is not impossible. You can verify that the lights are working properly by performing this test. If they need to be replaced, we have the Peterson Magnetic Tow Lights # PE26UR...
  view full answer...
• Recommended Tail Light Solution To Attach To A Cargo Net
  While there is not an option like what you're looking for, I do have another solution. Take a look at the: -Curt Auxiliary LED Indicator Lights # C53201. These lights measure 7" long and will utilize the same 4-pin style like # PE26UR that you're looking at. These lights are not magnetic, however with the shape of the lights being a bar you could easily use some zip ties # DW05724-10 to secure it to your cargo net. If you wanted a more permanent mounting option, that is also available...
  view full answer...
• Lighting Functions and Extension Cable for the Peterson Tow Light Kit
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness Item # PE26UR, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48-inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60-inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer End Connector,...
  view full answer...
• Does Battery Need To Be Disconnected When Flat Towing A 2011 Ford Fiesta Automatic
  It is recommended to disconnect the battery on your 2011 Ford Fiesta automatic when it is being flat towed. Your vehicle has a feature that will not allow the battery to be discharged while it is being towed, so you should not have to go through the whole procedure you mentioned to reset the vehicles presets. To keep a maintenance charge on the battery I recommend using a harness such as # BX88206 with the tow bar wiring you will be using so that you can run a wire from the connector at...
  view full answer...
• Will Magnetic Tow Lights Work With Chrysler Town And Country Minivan
  The Peterson Magnetic Tow Lights, part # PE26UR are led lights and have a 20 ft long cord that has a 4-way trailer connector. These lights are designed to work with any towed vehicle, and you use the magnetic bases to attach these lights.
  view full answer...
• Can a 2015 Honda Fit Sport Automatic Be Flat-Towed With 4 Wheels on the Ground
  According to one of our primary resources for flat-towing information, Roadmaster Engineering, the 2015 Honda Fit is flat towable. However, your new Fit owner's manual is the best place to check for any cautions or special requirements for flat-towing your exact version of the 2015 Fit Sport. We offer Roadmaster base plates for the manual transmission version of the 2015 Honda Fit Sport. That is their EZ4 Series Base Plate # RM-521569-4. Please refer to the linked instructions at right....
  view full answer...
• Can a 2011 Ford Fiesta Automatic be Flat Towed Behind a Motor Home
  I did some checking and it looks like a 2011 Ford Fiesta with an automatic transmission is good to tow as is. However, you should check with the owners manual to check for any limitations or recommendations. You will need a few things to accomplish this, the first thing being a Roadmaster EZ2 Base Plate Kit, part # 524425-1. This will install onto your Fiesta and be the attachment point from the tow bars. Next, you will need a RoadMaster Sterling All Terrain Tow Bar, part # RM-576 and...
  view full answer...
• Parts Needed to Flat Tow 2016 Cadillac Escalade
  Along with the Blue Ox Base Plate Kit # BX1716 and the Blue Ox Alpha 2 Tow Bar # BX7380 there are a couple more parts you need in order to safely flat tow your 2016 Cadillac Escalade. Since the Alpha comes with safety chains we can check that off the list but you will also need a wiring kit in order to activate your Escalade's brake lights and turn signals. For that the best option is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, or you can simply add magnetic...
  view full answer...
• Recommended Secondary Light System for use When Using Bike Rack with Cover
  I have a solution for you, but there isn't a directly compatible or solution designed specifically for the Thule EasyFold XT # TH903202. However, you could definitely use something like the Peterson Magnetic Tow Lights - 4-Way Flat Connector - 20' Long Harness # PE26UR if you've got a 4 way wiring harness on the back of your 2020 Mercedes-Benz GLE. These are magnetic towing lights that could be attached to the carrier or your vehicle to provide stop, turn, and tail light functions. If...
  view full answer...
• Recommended Items Needed When Flat-Towing 2003 Dodge Neon
  Since you have an automatic transmission in your Neon I found that it can be flat-towed but would require a transmission lube pump. When you flat-tow your Neon you will need 5 items. You will need base plates, a tow bar, safety cables, lighting for the Neon, and most states now require a supplemental brake system. The base plates I recommend are The Blue Ox Base Plates, part # BX1961. For a tow bar I recommend the Blue Ox Adventurer, part # BX7322. The safety cables I recommend are...
  view full answer...
• Is There A Plug In Tow Bar Wiring Kit For My 2021 Jeep Wrangler Unlimited?
  We do have magnetic towing lights, like the Peterson Magnetic Tow Lights # PE26UR, that will be fully plug and play. However, if you wanted to use the taillights on your 2021 Jeep Wrangler Unlimited, it will require some cutting and splicing. With that said, the Tow Ready Tail Light Isolating Diode System # TR118821 will include all the wiring and spade connectors to accomplish this. Said spade connectors make the install, and removal if ever needed, a lot easier. This will also have plenty...
  view full answer...
  
• Recommended Flat Towing Equipment For A 2018 Jeep Wrangler JK
  To use the Roadmaster StowMaster Tow Bar # RM-501 to flat tow your 2018 Jeep JK Wrangler you'll need to use a Roadmaster crossbar-style base plate like the # RM-521448-4 to connect to. This base plate is only compatible with a standard factory bumper so if you have a different style bumper let me know and I can find the compatible fit. The RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000lbs # RM-643 are a great choice for safety cables, and are my most recommended choice for vehicle's...
  view full answer...
• How Tall Is The Peterson Magnetic Tow Lights
  The Peterson Magnetic Tow Lights # PE26UR is an acceptable solution if your tail lights are blocked as these lights provide stop, left/right turn signals, as well hazard functionality; additionally, these lights are approximately 6.9 inches tall. Additionally, you may want to try the Curt Auxiliary LED Indicator Lights # C53201 which are specifically designed for this.
  view full answer...
• Are Additional Lights Required on Towed Vehicle When Using a Tow Dolly
  Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional lights just to make it easier to see the vehicle that's on the dolly. If you wish to add lights, you'll need to splice in a tow light kit, like # PE26UR, because the trailer connector on the back of your RV will already be in use with the dolly. Unless...
  view full answer...
• Need Base Plates and Magnetic Tow Light Kit for 2007 Mini Cooper Convertible
  I reviewed an online copy of the owners manual for the 2007 Mini Cooper. Page 114 indicates that the manual transmission model may be flat towed (with the gear shift in neutral) but that the automatic transmission version cannot be flat-towed without causing transmission damage. The automatic must be towed with the front wheels up off the ground as with a tow dolly like RoadMaster # RM-2050-1. If your 2007 Mini Cooper convertible is a manual we offer Roadmaster Base Plates # 521876-1....
  view full answer...
• Items Needed When Flat Towing Honda Fit
  You will want to check the owner's manual or with a dealership when you consider flat-towing the Honda Fit. Some manufacturers have restrictions as you mentioned for automatic transmissions versus manual transmissions. From my research I found that many people are flat-towing their Fits but the owner's manual from Honda does state the vehicle is not towable. When flat-towing any vehicle there are 5 items you will need. You will need base plates for the vehicle, a tow bar, safety cables,...
  view full answer...
• Can a 2013 Honda Fit Be Flat Towed
  I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by doing a Google search on '2013 Honda Fit Owners Manual'. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your...
  view full answer...
• Parts Needed to Flat Tow 2016 Jeep Wrangler Unlimited
  We can help you select the required components to allow you to safely and legally flat tow your 2016 Jeep Wrangler Unlimited behind your RV. You may care to check out the articles I have linked for you which cover the essentials of flat towing. Parts needed include base plates, safety cables, a tow bar, a braking system, a lighting/wiring kit, a high/low hitch adapter and a wiring extension for easier RV hookup. Base plate selection for your Wrangler Unlimited depends on how it is equipped....
  view full answer...
• 4-Pole Wiring Extension for Peterson Tow Light Kit PE26UR
  If you want to add 10-feet of additional 4-pole wiring to the Peterson Magnetic Tow Lights # PE26UR you can simply use a 4-pole extension cable. This will avoid the need to cut and splice the lights' wiring harness. Hopkins offer 10-foot extension # HM48235 that will plug right in. I suggest you apply some dielectric grease like # 11755 to the connection point and secure the two mating connectors with a zip tie.
  view full answer...
• Parts Needed to Flat Tow a 2011 Nissan Versa
  A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...
• Can Peterson Magnetic Tow Lights # PE26UR be Mounted to Side of 2016 Jeep Wrangler
  If you have a strong magnetic surface on the side of your 2016 Jeep Wrangler you could very well mount the Peterson Magnetic Tow Lights # PE26UR there. The magnets are very strong for the lights, but we haven't tested them on the side of a vehicle so there isn't a way I can guarantee that it will hold well. You may want to check out these Demco Wireless LED Light Bar for Towed Vehicles Item # DM36MV. They use a suction cup to mount to the inside of a back window if you have one. Since...
  view full answer...
• Solution for Powering Taillights on 2012 Mazda 6 On Tow Dolly
  I would start here by checking to see if your tow dolly has lights. More than likely it does, and you can plug the 4-way on the dolly into the 4-way on your motorhome. This would take care of your light problem. You will not be able to plug the 4-way on your 2012 Mazda 6 into the 4-way on your motorhome to power the lights. If your tow dolly does not have lights, I recommend using magnet lights like the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR....
  view full answer...
• How to Route Tow Bar Wiring to Rear of 2019 Kia Soul
  When installing a wiring kit like the Roadmaster Diode Flexo-Coil # RM-15267 on your 2019 Kia Soul the best way to run the wires to the rear tail lights is to route them under the vehicle between the underbody covers, securing it at various locations with zip ties while being sure to avoid any moving parts or areas that emit a lot of heat. I have attached an install video for this particular kit on the 2015 Kia Soul that you can follow along with. If you'd rather not perform this kind...
  view full answer...

Do you have a question about this Tow Bar Wiring?