T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118480
Retail:$99.60
Our Price: $69.47
You Save: 30%
Confirmed to Fit
2014 Nissan Rogue
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (471)
- Q & A (0)
- Photos
2014 Nissan Rogue - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Nissan Rogue with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points in trunk
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118480 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118480
Average Customer Rating: 4.9 out of 5 stars (471 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Perry P02/28/2024
2020 NissanRogue
Wiring kit was easy to install, the hard part was running the wire to the front of the car for battery power. Other than that, it was so simple, even a 64-year-old can do it.
by: Alicia11/11/2022
2019 NissanRogue
With the helpful videos this was very easy. We luckily had a car lift in a shop to use. We installed and plugged it in and works great. Now we can go pick up the boat and boat trailer that was given to us.
by: Elaine C.05/10/2012
2009 NissanRogue
Thank you etrailer.com! Not only did the hitch I ordered arrive sooner than expected, it was super easy to install...in about 30-40 minutes. The wiring harness took a bit longer, but thanks to the "how-to" video, we got it installed perfectly, didn't break anything...and it works!! We did the complete install in our driveway, without any jacks. Luckily, I fit under the car with more ease than my husband and was able to thread the wiring just like the video showed. By the way, I'm a 64 year-old grandmother and if I can do this, anyone can. The hitch looks great and we are extremely happy with the entire process, from ordering to install. Thanks John, we will definitely recommend you and your product.
Mike D.
11/14/2013
Hitch and wiring harness install went well everything works - videos were very helpful - BE SURE TO: clean holes opposite the tow hook thoroghly w oil
by: David07/03/2020
2016 NissanRogue
My product arrived earlier than expected and the packaging was protective and all intact.
The Curt Hitch Includes everything you need for the installation. Right out of the box you can feel and see the quality. It is a bit heavy so I suggest a helper when you’re ready to lift it up and install the bolts. The installation video was awesome and it even used my year/model Nissan Rogue so everything it showed underneath my vehicle was accurate and there were no surprises. The video suggested tying off the muffler and on my model, and I didn’t need to. All in all, the install was much simpler than I expected and I couldn’t be more pleased with the results.
The Tekonsha T-One wiring kit (ordered separately) includes everything you need for the installation, down to wiring connectors and zip ties. Quite impressive. I can’t say enough about the quality and thoroughness of the etrailer installation video. It used my exact vehicle so there were no surprises. I used my iPad, watched the entire video to get a feel, and then used pause and play as I proceeded. The only challenging part for me was running the included 12v wire underneath the body frame to the battery. It was an adventure but I got it done. When I was done, the trailer lights lit up and I couldn’t be more pleased, with the product and the support. Thank etrailer for your excellence. Pretty rare these days.
by: Lee Marshall07/20/2020
Needed a lightweight hitch and wiring harness for getting a small trailer w/ two kayaks to my favorite fishing holes. Super happy with everything. Would recommend etrailer to everybody that asks.
by: Eli 06/13/2023
2020 NissanRogue
Works great! The video really helped on the install and broke it down step by step. I did run short on time at the end and just tapped the 12v power outlet in the back cargo area instead of running the power wire all the way up to the battery. Hopefully it doesn't cause any issues in the future.
by: Roger09/21/2019
2019 NissanRogue
Very happy with my trailer hitch. Installation of the hitch and wiring was straight forward. Both hitch and wiring videos were very helpful.
by: Clinton10/04/2020
This was an exact fit, however, I took away a star based on having to run a constant +12 volts from the rear of vehicle to the battery. It seems that there could have been a connector to the brake light wiring for a constant live 12volts.
by: Scott 03/23/2024
Recieved the parts 2 days early. Already installed and tested going to use tomorrow morning. Nice job
by: Matt07/30/2023
Easy to install, local hitch company was going to charge 800, but this simple hitch is as good as any and easy for a monkey to install.
by: Barry 10/28/2023
2018 NissanRogue
Instructions were a little unclear but sufficient. The products are fine so far and seem well-made. I would recommend to a friend. ty
by: Past Master 06/29/2019
2018 NissanRogue
The product is solid and the video instructions for both the hitch and wiring was absolutely helpful and easy to follow. It is a sure fit for my vehicle. The time it took me to finish the install and wiring is o/a 2 1/2 hrs. And it is because I did not have a lift or a maintenance bay to go under the vehicle.
by: Amber 04/17/2024
2020 NissanRogue
Great product and fast delivery
by: Gary08/07/2023
Easy install. Worked great on our recent 7 week drive to Alaska and back!
by: Ronald 12/27/2022
Isuzu Rodeo
This wiring harness for my trailer that fits my Nissan works perfect This not being my first rodeo I have installed numerous wiring harnesses over the years for so many different cars. I couldn’t be happier with this one. It is clearly the best one I have ever seen and used and the instructions were very good and easy to follow. I’ve been using it for quite some time now and still no problems and I have 3 different trailers I use it on. It is a pleasure to plug it in and see that the lights work perfectly every time. That has not always been the case over the years with other ones
by: Myron09/27/2017
2017 NissanRogue
Hitch was a perfect fit, undamaged in shipment and this 77 year old installed it alone in 18 minutes. Easy to install and prompt service. Intended for use mostly with a cargo carrier.
by: Paula01/06/2018
Here is a picture of the hitch receiver and the electrical plug. My installer decided to keep the plug near the hitch and not in the car when not in use.
by: George 02/05/2024
The hitch frame fit very well.
by: Joseph 08/29/2023
2019 NissanRogue
Easy to follow instructions. Took about an hour to complete.
by: Raul 09/03/2022
I followed the instruction video and everything went well.
Raul
9/4/2023
Excelente satisfacción
by: Jonathan09/19/2022
My kit got caught up in shipping issues using the free shipping option and didn't arrive in time for a trip. After it sat at one location for four days, I ordered an alternative kit off [online store] this did arrive in time. This etrailer kit just sat in the box unused. for others, just plan on the free shipping option to take up to a couple weeks and you should be fine.
For the kit I got off [online store] I just wired power to the read 12v cigarette adapter and it works great. I store the harness above the spare tire when not in use.
by: Robert08/08/2021
2015 NissanRogue
Perfect fit
Good instructions
Fast install
Plug and play harness
by: Jackson E.05/20/2015
2013 Infiniti G37
The shop that installed my trailer hitch couldn't find a wiring harness for my car from their suppliers. After waiting until a few days from my first trip pulling my bike with the new car, I took matters into my own hands and ordered this item overnight from etrailer.com. I got it about 10 am the next morning in great shape. The shop installed it without any hassle, and it works great. From what they told me, it was pretty much plug and play, you just have to run a hot lead up front to the battery. Thanks for the fantastic quick service etrailer!
Jackson E.
5/26/2016
Worked flawlessly for a year now. Id estimate I use it twice a month or so. I recommend this wiring harness highly.
by: Gerard12/03/2023
2016 NissanRogue
It fits nice nice no problems
by: Huitron06/15/2018
Tow hitch and wiring Is exactly how it’s described the videos on how to install both items I purchase were really helpful to do it my self and and save me some $$ I would definitely buy from etrailers again
25
471
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Troubleshooting Trailer Wiring that Only Works on One Side After InstallTypically when this happens the issue is that the connection made on the problem side just wasn't made all the way. If you unplug and replug in the connection on that side that usually cleans up the issue. You might also make sure that the pins of the trailer connector are clean as well. If you see corrosion take some sandpaper to the pins of the connector.
view full answer... - Trouble with LED Trailer Lights While Connected to 2009 Nissan RogueFor starters, we need to find out which side the issue you are having is occurring on, the vehicle or the trailer. In order to do this you can either A) find a different trailer/tow vehicle or B) test the pins inside the trailer connector. For example, if you test the turn signal pin with an incandescent tester and it only activates after the turn signal has been applied multiple times then this would point to the trailer wiring harness being bad or incompatible. I am not familiar with...
view full answer... - Trailer Wiring Recommendation for a 2009 Nissan RogueYour Nissan Rogue doesn't have the correct brake light setup for you to be able to splice in a 4-way in the way you described. Trailer wiring requires the stoplights and blinkers to be on the same circuit whereas your vehicle has separate turn signals form the blinkers so a converter would be needed. That's reason number one. Reason number two is that the taillight circuits of your vehicle don't have a high enough amperage rating to power your trailer's lights without overloading the circuits....
view full answer... - Can The T-One Vehicle Wiring Harness Be Wired Into A Fused Outlet Instead Being Ran To The BatteryTechnically you could splice into this outlet for since it does have a 10 amp fuse but you'd have to ensure the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480 is the only thing on this line and would render the outlet useless. If you plugged anything else into this outlet you'd likely pull too much and blow the fuse. Personally, I recommend running the line to the battery directly to ensure that the ModuLite is receiving the correct amount of power and won't...
view full answer... - Trailer Wiring Recommendation for a 2011 Nissan RogueFor your 2011 Nissan Rogue the trailer wiring harness part # 118480 would be confirmed as a fit and would work well for trailer wiring. I attached an install video for you to check out as well.
view full answer... - Power Wire Has to be Connected to Battery for Trailer Wiring Harness # 118480, 2010 Nissan RogueTo install the Tow Ready Custom Fit Vehicle Wiring, # 118480, on your 2010 Nissan Rogue, you will need to route a wire from the red wire on the harness, under the vehicle (avoiding areas that may pinch or burn the wire), and to the positive battery terminal via the included in-line fuse holder and fuse. There will also be connections made at each of the taillights. I have included a link to the installation details and an installation video that will show how to perform this installation.
view full answer... - Install Video of Trailer Wiring Harness On 2020 Nissan RogueI have attached below an installation video of the T-One Vehicle Wiring Harness part # 118480 which is a fit for a 2020 Nissan Rogue. The video is on an earlier model but the install process will be the same. The majority of the panels just pull straight out. The manufacturers install instructions are also attached below as well.
view full answer... - Warranty Implications of Installing Tow Ready # 118480 Trailer Wiring Harness on 2014 Nissan RogueThe Tow Ready # 118480 is specifically designed to fit your Rogue. If it's installed according to the instructions, it will not damage anything. The trailer wiring harness is circuit protected, and will draw the power needed for the trailer lamps directly from the vehicle battery, instead of pulling it through the vehicle's taillight circuits. As far as warranty implications go, purchasers of aftermarket vehicle parts and accessories are protected by the Federal Magnusson-Moss Warranty...
view full answer... - Recommended Trailer Wiring Harness for a 2017 Nissan RougeThe trailer wiring harness I recommend for a 2017 Nissan Rouge is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118480. This is a plug-in-pay option that provide a simple 4-way/4-pole connector. This is most common on small trailers.
view full answer... - Does the Tow Ready Wiring Harness # 118480 Have to Be Run to Vehicle BatteryPowered trailer wiring harnesses like the Tow Ready part # 118480 that you referenced have to have the battery wire run all the way to the positive post of the vehicle battery. The reason for this is so that the taillights of the trailer won't be putting any amperage draw on the delicate taillight wiring of the vehicle. All of the amperage would be drawn from the battery instead. If you were to power the unit from a 12 volt source like what you mentioned you would be defeating the circuit...
view full answer... - Is Insulation on Power Wire for Trailer Wiring Wearing Off a ConcernI understand your concern and I don't want to just dismiss it, but the situation you described is not going to happen if you install the Trailer Wiring # 118480. If properly route the power wire of this would not wear through. And if that did happen the short it would create wouldn't drain the battery. Basically it would just blow the inline fuse that comes with the kit and the wiring would be inoperable. I attached a help article on how to route the power wire of kits like this for you...
view full answer... - Trailer Wiring Harness for 2015 Nissan RogueWe do indeed have a trailer wiring harness available for your 2015 Nissan Rogue, part # 118480. I've linked you to the installation instructions as well as to an install video showing the harness being installed on a 2015 Rogue.
view full answer... - 4-Pole Trailer Wiring Harness for 2017 Nissan RogueThe Nissan Xtrail was never offered in the U.S. but it was sold in Canada and Mexico. Since all our wiring products are intended for the U.S. versions of Nissan vehicles I cannot be absolutely sure of the fit in another version. However, the Rogue does share the same platform as the second generation X-Trail. For the 2017 Rogue we have 4-pole trailer wiring harness kits like # 118480. Please refer to the linked photo that shows the connectors used on this product. Compare to those on your...
view full answer...
- Wiring Harness Troubleshooting For 2018 Nissan RogueIt is very odd that only the third brake light on your Rogue would be acting up after installing the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480; it really should not be possible that only the third brake light is having an issue. I contacted the manufacturer about this and was told they have never heard of anything like this happening. They recommended disconnecting the negative terminal of the battery for about 5 minutes to reset any module that could have...
view full answer... - Attaching the Power Wire for a Trailer Wiring Harness on a 2013 Nissan RogueOn trailer wiring harness # 118480 for your 2013 Nissan Rogue, you will have to connect the power wire from the converter directly to the vehicle battery. No other 12 volt source should be used. It is not recommended to attach the power wire from the converter to any other 12 volt power source other than directly to the battery. The reasons for this are: connecting to a circuit like that 12VDC outlet defeats the purpose of isolating the trailer wiring from the vehicle wiring so short...
view full answer... - Does Trailer Wiring Harness for 2015 Nissan Rogue SL Void WarrantyThere is a law called the Magnussen-Moss warranty act that states, in part, that if you install an aftermarket part on your car then it will not void the warranty unless that part caused the problem. So installing the trailer wiring harness, # 118480, will not void the warranty.
view full answer... - What Gauge is the Power Wire of the Tow Ready Wiring Kit # 118480The power wire of the Tow Ready Custom Wiring Kit # 118480 that you referenced is 12 gauge. I attached an install video, installation instructions and an FAQ article on routing power wires for converters like this for you to check out also.
view full answer... - Can a 4-Way T-One From a 2005 Toyota Prius Fit On a 2015 Nissan Rogue? Your T-One Vehicle Wiring Harness # 118505 that you likely have on the 2005 Toyota Prius has a vehicle specific connector that you can connect directly to the tail light wiring so that you don't have to splice any wiring. The T-One Vehicle Wiring Harness # 118480 that fits your 2015 Nissan Rogue will have a different end connecter that connects to the tail light on the Rogue as it is vehicle specific. The wiring is likely also longer as the Rogue is a larger vehicle so it will need to...
view full answer... - Trailer Wiring Harness Recommendation for a 2010 Nisan MuranoThe difference is the pin locations. The # 118480 and # 118481 are very similar. So much so that they share the same connectors so either would plug into either of your vehicles. But since the two vehicles call for two different pin outs on the connectors a second harness was made. Long story short, for your 2010 Nissan Murano you will have to install the # 118653.
view full answer... - Trailer Wiring Harness and Installation Instructions for a 2016 Nissan RogueI have included links to the instructions and to a video showing installation of trailer wiring harness # 118480 for your 2016 Nissan Rogue. I have also included a link with tips on routing the power wire for the harness.
view full answer... - Will Draw Tite Class III Trailer Hitch Fit 2010 Nissan RogueAs long as your 2010 Nissan Rogue is not a Krom model, the Draw-Tite Class III Max Frame Receiver Hitch # 75902 will fit your vehicle and work well for you. I have linked the installation instructions for you as well an installation video of this hitch on a similar Rogue as yours. With the Class III rating, this hitch carries a maximum trailer weight capacity of 3,500 pounds and a max tongue weight of 350 pounds. You can find the towing capacity of your Rouge listed in your owner's manual....
view full answer... - Draw-Tite Class III Hitch for 2019 Nissan RogueThe Draw-Tite # 75902 is a verified fit for your 2019 Nissan Rogue. I have included a link to the hitch and a link to the full install instructional video. I have also included a picture so you can see what this hitch might look like on your Rogue. Even thought the capabilities of this hitch far exceed your Rogue's abilities you will still benefit from the enhanced stability of the 2" receiver and that there are more accessories available (like bike and cargo racks) for a 2" receiver. If...
view full answer...
- Recommended 4-Way Trailer Wiring for 2015 Nissan RogueFor your 2015 Nissan Rogue I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480 with is a custom fit. The harness will attach to the factory wiring connectors located behind the trim panels in the cargo area on the driver and passenger side. The power wire will be run directly to your vehicle battery to protect your electronics from overdraw. Your 2015 Nissan Rogue is not rated for a towing capacity large enough to require a brake controller, so you...
view full answer... - Trailer Hitch for 2018 Nissan Rogue Towing TrailerIf you were planning on towing a trailer with a golf cart in it with your 2018 Nissan Rogue a Class III hitch like the part # e98846 would be your best option as it has a higher towing capacity than the Class II options. For trailer wiring then you'd want the part # 118480 which is the easiest to install and most reliable option we offer.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Joshua S
Video by:
Zach D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Alicia
11/12/2023
Its still working wondeful