7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter

See what our Experts say about this Pollak Custom Fit Vehicle Wiring

• Will the Draw-Tite Hitch 41948 Fit a 2019 Ram 1500 Classic Warlock Special Edition
  The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41948 is a fit for a 2019 Ram 1500 Classic Warlock Special Edition so long as you don't have a factory trailer hitch. The Draw-Tite hitch offers a complete bolt-on installation with heavy duty towing capacity of 12,000 lbs. If you don't already have a trailer wiring harness, the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933 fits into the factory bumper cutout.
  view full answer...
• Troubleshooting Trailer Connector on 2013 Ram 1500
  If the fuses are good and there's no corrosion or damage to the connectors, then there has to be either a problem with the wires themselves or the ground. I would start by checking and possibly reconnecting the ground just to make sure since it's fairly easy to do. I would also make sure the issue is on the truck side by testing the connectors with a circuit tester like # PTW2993 if you haven't already. If you've already done this and it's definitely on the truck side and you're still...
  view full answer...
• Replacing a Broken Wiring Harness on a 2007 Dodge Ram Pickup
  If the wiring is damaged, it is always recommended said wiring be replaced or repaired. That being said, I am not aware of a specific part to remedy this without replacing the whole part. You could use Deka Cable Ties like # DW05727-25 as a temporary solution, however. If the vehicle is a 2007 Dodge Ram Pickup, you would use the Pollak 7 Way # HM40975-11933, or the Tekonsha T-One # 118381 if you have a 4 Flat. If the trailer needs the replacement, the Wesbar 4-Pole connector # W787268...
  view full answer...
• Do You Have the Bracket Separate From the HM40975 Connector
  I am sorry but at this time we do not sell the bracket separately for the HM40975-11933. We do have the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part number HM40975, available without the plug adapter wiring.
  view full answer...
• Why Is 2015 Ram 1500 Trailer Wiring Circuits Not Functioning
  On your 2015 Ram 1500 the TIPM is responsible for powering the trailer wiring/lighting circuits and when the circuits stop working the recommended Ram solution is to take it in to a dealer to have them reset the TIPM. Since you can only reset the TIPM so many times before you have to replace it a lot of people will bypass it and go with a hardwired trailer wiring solution. All you will need is the Upgraded Circuit Protected Tail Light Converter Hardwire Kit # 119178KIT along with 4-Pole...
  view full answer...
• 4-Way and 7-Way Trailer Wiring Recommendation for 2009 Jeep Wrangler Unlimited
  For your 2009 Jeep Wrangler Unlimited with a factory 4-way trailer wiring harness the Pollak 7-Way and 4-Way part # HM40975-11933 that you referenced would be exactly what you'd need. This will replace the 4-way you have now and give you a 4-way and 7-way.
  view full answer...
• Replacing Broken 7-Way Trailer Connector on 2002 Ford F150
  Going with the # PK11998 would be your best bet. The 4-foot pigtail does include the grey locking tab you speak of, as shown in the photo I edited for you. I will also provide the color code for the pigtail wiring, as it might not necessarily wire up color-for-color to your F150. To determine function, you might need a circuit tester like part # PTW2993, if you do not already have one.
  view full answer...
  
• Connector on 7-Way For 2012 Dodge Durnango
  There is a harness you can get, but not by itself as you'd also need to get the plug that comes with it. If you're okay with that use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933.
  view full answer...
• Replacement 7-Way and 4-Way Trailer Wiring Harness for 2016 Jeep Cherokee Trailhawk
  We have the part # HM40975-11933 which is a 4 and 7-way that is confirmed to fit your 2016 Jeep Cherokee Traihawk and uses the factory harness.
  view full answer...
• Replacement OEM Plug Adapter for 7-Way on 2010 Dodge Dakota Big Horn
  The correct OEM replacement for the 7-way wiring harness on your 2010 Dodge Dakota is the # PK11933. If your 7-way was damaged when it melted you can replace both using the # HM40975-11933. There is no option that comes with a built in T that would allow you to run 5th wheel/gooseneck wiring. The only option would be to buy a complete wiring harness and add it in like the # C56001 you were looking at.
  view full answer...
• Locating OEM Plug for 7-Way on 2022 Ram 5500 Cab and Chassis
  The OEM plug that would allow you to use the # HM40975-11933 should be found at the rear of your 2022 Ram 5500. Everything indicates that your truck has the rectangular factory plug that would allow you to use this wiring harness. Typically this would be found behind a cover for the 7-way but I don't have an exact location for a 5500 cab and chassis. If you still can't find it you could check for a brake controller port. This would have the brake output wire that runs back to the 7-way...
  view full answer...
  
• Will Hopkins HM50002 Smart Hitch Backup Camera Plug and Play Install on 2007 Dodge Ram
  The answer to your question will depend on what kind of factory connector your 7-way plugs into. If the connector that plugs directly into the rear of your 7-way trailer connector is round, then the Hopkins # HM50002 Smart Hitch Backup Camera system will be a plug and play installation. If the connector plugs into a rectangular connector, you can simply replace the existing 7-way with part # HM40975-11933 which will plug into the rectangular connector while providing a round connector...
  view full answer...
• Trailer Wiring Harness for a 2017 Jeep Cherokee Latitude
  For a 2017 Jeep Cherokee Latitude that did not come with a factory tow package you can add a trailer connector using # 118605. I have linked a video showing an example installation for you. If it did come with the factory tow package all we have are replacements for the factory connector such as # HM40975-11933.
  view full answer...
• Troubleshooting Trailer Brakes that Lock Up with no Electric Brake Controller Installed
  You have a short somewhere on the brake output wire going back to the 7-way trailer connector on your 2013 Dodge Durango. I would start at the 7-way and inspect the connector and the brake wire. The brake connects to the pin in a 5 O'clock position when looking into the connector. If you find the problem on the trailer connector harness before it plugs into the truck's wiring you can either fix the wire or replace the harness with # HM40975-11933. If it's deeper into the truck or you...
  view full answer...
• Parts Needed to Install 7-Way on 2005 Jeep Wrangler
  Not all of the 2005 Jeep Wrangler came with the wiring needed for the # HM40975-11933 to attach to. If you can't find the necessary connection it's very likely you don't have it and you'd need to instead install a 4-way with part # C55363 and then convert it to a 7-way with the part # 37185.
  view full answer...
• Easy to Install Trailer Brake Controller for 2008 Jeep Wrangler Unlimited with 4-Pole Wiring
  Yes, we can help you with the items needed to upgrade the 4-pole wiring on the 2008 Wrangler Unlimited to a 7-way and to install a trailer brake controller. The Jeep does not have an under-dash port to connect a controller but we do have an option that will be very easy to install. For the easiest possible installation I recommend the Curt Echo # C51180 and 7-way upgrade/install kit # ETBC7L. If your Dad has a compatible smartphone then these two items are all that is needed to add the...
  view full answer...
• Recommended Hitch and 7-Way Wiring Harness for a 2004 Dodge Ram 1500 w/ Tow Package
  Yes, the B&W Heavy-Duty Trailer Hitch item # BWHDRH25211 will fit your 2004 Dodge Ram 1500. It fits Dodge trucks with or without the factory hitch. This hitch is custom fit and bolts to your Dodge with included hardware. The B&W Heavy-Duty Trailer Hitch item # BWHDRH25211 is made in the USA and weighs 73 lbs. To replace your Dodge's 7-Way you will want the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket item # HM40975-11933. This will plug into your factory tow packages wiring...
  view full answer...
• Trailer Wiring Recommendation For 2017 Jeep Grand Cherokee
  The Pollak 7-Way part # HM40975-11933 is a fit for your 2017 Jeep Grand Cherokee and would plug into a square connector at the rear of the vehicle. Most likely it's the connector you found already based on what you described. You might test the pins of the connector you found with a circuit tester like part # PTW2993. If they are active when vehicle taillight signals are on then this will work. If instead you do not have the tow package wiring complete the T-one kit part # 118727 would...
  view full answer...
• Is Just Harness of Pollak 7- and 4-Pole Trailer Connector Socket HM40975-11933 Available
  Yes we do. For just the harness of the part # HM40975-11933 you would want the part # PK11933.
  view full answer...
• How To Convert a 4-Way To a 7-Way On a 2018 Jeep JK Wrangler
  In order to install a 7-way trailer connector on a 2018 Jeep JK Wrangler with factory tow package you can use the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933 which is plug-n-play. This connector plugs into a factory port under the rear bumper and will replace the 4-way you have now. It has the battery charge line circuit you will need for your trailer. If the trailer also has brakes as well then you'll need a brake controller for which I recommend the Curt Echo Wireless...
  view full answer...
• Fit of Pollak # HM40975-11933 7-Way/4-Pole Connector on 2006 Jeep Liberty Factory 7-Way
  The Pollak 7-way/4-pole Connector you referenced, part # HM40975-11933 will indeed replace the existing 7-way on your 2006 Jeep Liberty. The only possible knock on this connector is that both the 7-way and the 4-pole can't be used simultaneously, as both the protective covers won't open at the same time. If that's not a problem for you, this connector would work just fine. The Tow Ready # 20135 would also be a fit, and both connectors could be used at the same time. I've linked you to...
  view full answer...
• Wiring Harnesses For a 2007 Dodge Dakota With Factory Tow Connection Points
  I have a few options for your 2007 Dodge Dakota that has the factory tow connectors. Be sure to check your fuse panel for the necessary fuses to power the trailer connector functions as they may have been left out from the factory. First is the T-One Vehicle Wiring Harness # 118381 which is only going to give you a 4-way flat connector. Second is the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM42190 that will give you a 7-way connector. Finally the 7- and 4-Pole Trailer...
  view full answer...
• Adding 4-Way Trailer Connector to 2016 Jeep Cherokee Trailhawk with OEM 7- and 4-Way Connector
  The Hopkins Plug-In Simple Vehicle Wiring Connector # HM11142464 referenced in your question will plug into ports behind the driver and passenger side tail lights on your 2016 Jeep Cherokee Trailhawk to provide you with an additional 4-Way connector. Because it will be wired to different circuits than your existing OEM 7- and 4-Way connector both connectors can be used at the same time. It sounds like you are then looking for a way to integrate the new 4-Way into the OEM bracket on your...
  view full answer...
• How To Have A 7-Way And 4-Way Connector On A 2008 Dodge Ram Without A Factory 7-Way Plug
  The Pollak Custom Fit Vehicle Wiring, # HM40975-11933, is a replacement connector for the Dodge Ram trucks with the factory plug under the truck on the drivers side. If your 2008 Dodge Ram 1500 does not have the factory trailer wiring harness available, then you will need to use the Draw-Tite Wiring Harness, # 119178KIT, and the 7 and 4 Way Installation Kit, # ETBC7. That will give you the 7 and 4 Way connector at the rear of the truck. The part # 119178KIT wiring harness installs behind...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?