# 1
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
The service from etrailer has been great! They have been very helpful through the entire purchasing process. My one star is due to the quality of the product. First, for something as heavy duty as these are, you’d expect better packaging. On arrival, one of the spindles was sticking out of the box and the hand holds were torn on one of the other boxes. I was a little worried what I might find in the damaged box but everything seems to be intact. The disappointing part is the quality of the welds. For the price you are spending on these, I would expect a higher quality of fabrication. There is undercut in the welds that hold the three support plates together and big ol sloppy welds every where else. Unsure of what to do as my trailer has been designed around this suspension system.
I found etrailer.com looking for these. A very knowledgeable gentleman helped me select the proper self-adjusting brakes and drums for the axles I bought.
# 2
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
Used this on a camping trailer behind our Jeep. The suspension handled 1000 miles of washboard gravel roads and mild rocky offroading with ease. We don't drive gently and had the trailer airborne at one point. The brackets that we opted to fabricate for them were straightforward and simple to install. I especially like the ground clearance under the trailer that you gain due to the lack of a solid traditional axle. The ride quality overall was excellent, especially given where we took it. In hindsight we should have gotten the 4" travel version as it may have been able to soak up deep ruts at 40mph a bit better. Only mild complaint is that the powdercoating on the leading edges had already begun to flake off when we received the suspension. I hit it with a can of spray paint, but I would have hoped it would be more durable. Overall, I will definitely be purchasing this axle-less suspension again for my next trailer build.
Excellent, helpful customer service sold me this product, and trust me when I say it's worth the price tag. Pulled the old axle and leaf spring off a 60's era Bantam and swapped out for this with a support bar in between. Bumped up tires to 315/75r16 BFG TA/KO's to match my rig and am amazed at how much better this trailer now pulls. Empty it wad bouncing all over the place with the old axle and leaf spring setup. Now I hardly even know it's there. Was very easy to install, took a couple hours but I am happy with how it turned out. A+++ product and customer service!
# 3
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
Incredible system. Handled our Overland trek through Colorado and Moab. These axles on our 1917 Ford bed ran multiple Jeep Badge of Honor trails. The suspension handled flawlessly. Handles off camber rocks and drop offs smoothly. We ran the 4 inch lift and off road offset to fit the factory Jeep wheels.
Josh helped guide me to the right product, ensured I had any and all additional items to finish the project. Well done Josh and THANKS!
# 4
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
I bought a replacement axle and idler hubs for my utility trailer. Overloading with heavy firewood finally took its toll! Everything from etrailer.com showed up by UPS Ground right on schedule and the parts went together very nicely. The hub bearings are factory-lubricated, saving that critical step. I tested it out yesterday and the trailer runs fine. I would have to rate the products and purchasing experience as excellent (5 stars).
the axle came with castle nuts and cotter pins, but no washers, the old hubs fit but the washers i have are too small
# 5
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
No totally satisfied with the service I received since I wasn’t communicated on the logistic timing of sending the product out until four days after buying the products. I had to call several times to know what was goong on.. More comunication is needed.
These axles were a perfect retrofit for a vintage tralier rebuild/mod. Service at etrailer was excellent. The parts were easy to fit with a little care. I would recommend this product and this supplier to anyone looking for trailer parts.
# 6
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
Very fast delivery for a axle and hubs. Spring center for my trailer was a 47 and all places only had 48’s. Welded the spring mounts a 1” shorter and all was great. Very good quality axle it will work great. Sorry no pictures of my project, time crunch.
# 7
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
It is important to know that your wheels are going to sit very tight to the trailer frame. I needed to add an extension to the hub for it to clear the sides of the camper I built.
Very smooth pull. I'm very impressed on how the trailer pulls. My traditional axle trailer seemed to bounce a lot on the highway which made a lot of noise, but with the Timbren Axle-less that I installed on a new trailer, the trailer is so smooth and way less noise. Great product.
# 8
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
Be warned! I would not buy from Etrailer ever again. We received our order and Etrailer failed to send the entire trailer axle kit. They did not include one spindle in the kit, rendering our order useless without ordering an additional spindle. Because more than 30 days had elapsed before reporting the issue, Etrailer refused to send the spindle, in addition to insinuating that I was deceiving them. This must be how they increase their revenues…don’t send the entire order, and if the customer does not catch it within 30 days, the customer loses and Etrailer makes more money. Absolutely horrible customer service from the company who failed to fulfill their end of the contract while accusing me of being deceptive. One star is far too generous for Etrailer and their scams.
Very pleased with the design and heavy duty construction of these axles. Used them to build an off-road trailer and they performed flawlessly throughout many challenging trails and off road situations. My only complaint is that the ez-lube hub design does not take grease very easily. I've had to disassemble the hubs to properly grease both bearings due to the inadequate amount of grease flowing into the bearings.
# 9
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
Little damage from handling put still good
etrailer decided to ship this 140lbs axle via US Mail. Scheduled delivery was in 5 days from date of order. Immediately after getting the USPS tracking I called and was on hold forever. I was told it was new people in shipping and my axle would arrive on time. A month later and numerous calls later, still no axle, my mail man said " no way would he would be delivering anything that size". I was then told I would get it refunded since it was lost in the mail. A month later, and several calls saying the refund was "processes" still no refund. Then I was told I'd have to ship it back before getting a refund. But I still never received it. 2 months later an un marked car delivered it and finally etrailer sent a UPS pickup and got refunded. 3 months of different stories everytime I called. Be aware, they must have a lot of newbies at etrailer.
# 10
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 5 Bolt - 3.5K
The axle-less suspension worked very well for my boat trailer. The suspension was easy to attach to the trailer frame and provided a lower profile than the traditional leaf spring and axle system.
The service from etrailer has been great! They have been very helpful through the entire purchasing process. My one star is due to the quality of the product. First, for something as heavy duty as these are, you’d expect better packaging. On arrival, one of the spindles was sticking out of the box and the hand holds were torn on one of the other boxes. I was a little worried what I might find in the damaged box but everything seems to be intact. The disappointing part is the quality of the welds. For the price you are spending on these, I would expect a higher quality of fabrication. There is undercut in the welds that hold the three support plates together and big ol sloppy welds every where else. Unsure of what to do as my trailer has been designed around this suspension system.
# 11
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
Actual trailer weight 1540#, 210# tongue weight. 1310# suspension load. After 600 miles, both springs collapsed making the suspension rigid. Have received replacement springs from Timbren but haven't had a chance to try them out.
These things look sweet! Cant wait to install them. Fast delivery! Great!
# 12
Timbren Axle-Less Trailer Suspension - Standard Duty - 2" Lift - 5 Bolt Flange - 5,200 lbs
Works good
Great product
# 13
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
The trailer rides great down the road and no more worries about saltwater and rusty leaf springs. Not a cheap option but I’m very happy with the setup. When installing, just be sure to measure accurately and have sharp drill bits. A drill press type of guide also helps ensure correct drilling angles. The first picture is of a mounting gusset a local welding shop made. One is needed for each side and necessary to provide needed mounting strength-at least on my trailer frame. Pics 2 and 3 show the mounted suspension on one side of the trailer. Pic 4 shows the suspension on one side of the trailer with the axle attached and a separately purchased disc brake assembly mounted on it. Finally, pic 5 shows a 2” box channel between both suspension assemblies. Independent suspensions would have been nice, but I wanted to ensure trailer rigidity was maintained. So, after one year, so far, so good. It’s all smooth sailing down the highway.
We use Timbren's ASR3500S06 on all of our XER trailers. We couldn't be happier. It is a well built suspension.
# 14
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
Great looking parts, robust design, professional looking welds....Nothing missing... I contacted Timbren prior to my purchase and received a prompt, helpful reply... The supplied instructions are complete and straight forward, i'm confident should i have any issues, contacting them will get them resolved...
Product exactly what I need. People at etrailer where beyond extremely helpful! Great to deal with!
# 15
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
I purchased two of these axles to replace my old square ones. They appear to be good quality but they arrived damaged. The grease fittings on the ends were smashed because packaging wasn't adequate. I've emailed back and forth and was shipped the wrong parts for replacement. In the end I was told I'd have to cut the spindles off and replace them. All I need is new grease zerks that thread on the ends of the axles. Be prepared to purchase these on your own because customer service is subpar on a remedy and the way they package them for shipping does not prevent damage.
The axle is of great quality, I had to have mine fabricated a bit to match the old spring seats.but I wouldn't hesitate to buy the axle. The shipping and customer service is top notch from etrailer. Excellent products, services and shipping...
# 16
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs
After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through) After checking my local source, I was told there was a long lead time for new axles due to the pandemic. I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts. Everything arrived ahead of schedule, allowing me to get back up and running quickly. Thank you etrailer. You are a valuable resource.
The axles were missing studs that fell out during shipping. Also, no nuts were included for mounting the brakes.
# 17
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
The axle-less suspension worked very well for my boat trailer. The suspension was easy to attach to the trailer frame and provided a lower profile than the traditional leaf spring and axle system.
Customer service was excellent! Thanks!
# 18
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
ordered a trailer axle and had it in 2 days. excellent place to get trailer parts
Extremely happy with the product and the speed that it was received
# 19
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
Awesome results. I purchased with new leaf springs and hardware. Very solid. I imagine that most of you struggling failed to research and measure properly. Take responsibility and own your results.
# 20
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
Great product. I bought the harbor freight trailer last year and within a couple of weeks I had problems with one of the Hubs. The bearings went bad and the made in China hub had a crack in it. Could not find an exact replacement and tried a bunch of trailer stores around the Chicagoland area. Then a few months later the other hub started to wobble when I got home and replaced it also with a close match but not perfect. Every since then the camber was off and I didn't feel safe driving on the highway. After a year of looking I finally found this website and they had the Hubs and axle to replace the bad quality of the made in China original one that came with the harbor freight trailer. Took a couple of easy hours to replace and I couldn't be any more happier. Drove it on the highway for 50 miles and everything is still nice and tight so far and it looks way better too. Plus, the easy lube system is the best part! George kept in contact with me from the beginning to the end letting me know that it shipped and that it arrived at my house. 2 days to get to my house! I will be back to purchase more things in the future!
It’s a great looking axle. This is perfect fit for the trailer I purchased from the discount hardware store. Straight forward to install. It was a pleasure working with everyone at etrailer. Couldn’t be happier. i have just one outstanding question. My old axle was round 1 3/4”. Are most people reusing old bracket (which I decided to do) or buying square bracket and if so what size? i have included some pictures of trailer and also some closeups of bracket holding axle to spring. Once again a pleasure doing business with etrailer.
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"