# 1
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
I only drove a short distance and the bar slipped. I'm very uncomfortable with the product and worried the whole time if my bike would end up on the road. Also I think the clips would eventually rub the paint off the car.
Really happy with my purchase of a trunk bike rack from etrailer for my Nissan Murano. It is easy to set up and take down and store in the back when not in use. My bike feels very secure on it. Shipment was very fast and price was great.
# 2
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
Rubber straps are easy to use and very strong.
The good: I like the way the bikes are held in and the ability to add the upright adapters to the bike frame holders. The straps are quality too. For a jeep with a spare tire, this is the perfect length to clear it. This rack is 5 stars from the bike holders to the base of it. The bad: the 2"receiver adapter and bolt are insufficient. I wish they made this in a solid 2" hitch. The entire setup is held into the receiver by a very short bolt. It only goes about half way into the receiver tube. So your hitch is only "secured" on one side. A hitch pin or bolt should go through the receiver tube completely imo so it can be secured on the other end with a retaining clip or nut. Because this only goes in the one side, the entire weight of the rack plus bikes are held tight to one side of the receiver by the undersized bolt and washer. A few bumps down the road and that bolt loosens. Now instead of distibuting the weight of the rack and bikes on the receiver and post, it's completely up to the bolt to keep you from losing the rack. The bolt threads get damaged too. I took this down a dirt road and nearly lost everything. I had to buy my own bolt with hd fender washers and lock washers to correct this. Thule should've provided this from the start. The current short bolt design where only one side of the receiver secures the rack is unacceptable. This rack is 1 star at best for the connection to the receiver.
# 3
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Installation was effortless. Love how it supports the bikes.
First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.
# 4
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
Received the bike rack on time and in perfect shape. Assembled it and it works great! The only improvement that Swagman could make would be somewhat better assembly instructions, but anyone mechanically inclined should be able to figure it out. Mated it to the etrailer hitch receiver recommended by your consultant and voila! Ready to roll the first good weather day we get!! Thanks!
Delivered on time. Product was as described -only used once but it workded well. No concerns!
# 5
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Truly grooving on my wife's new Swagman Chinook bike rack. She wanted to be able to transport her nice road bike easily without throwing it in the back of her car, and since a roof rack is out of the question, this Swagman model fit the bill perfectly. It arrived quickly on the anticipated date. Kudos to etrailer.com for the email updates to keep me informed of my purchase. Within one hour, it was installed on my wife's 2014 Mazda3 hatchback. The Swagman is heavy and solid, which is reassuring as it makes me feel confident that it will keep the bikes secure. It also makes me feel like I got my money's worth. A ratchet wrench and Phillip's head screwdriver were the only tools required for the easy install. I did my research before purchasing the Chinook model as I was also eyeballing a very similar Thule rack that was slightly more expensive. I spoke with an etrailer.com expert who gave me the lowdown on both models. Ultimately, the Swagman won out because it has a smaller 'footprint' while extended or folded up ... and also can tilt away from the car for easy access to the hatchback area. Very convenient! FYI: Mazda doesn't make a trailer hitch for the Mazda3 as it's a small car with a small engine and has no business towing anything. Thankfully, the Curt company makes an aftermarket frame and trailer hitch that fits the Mazda3 hatchback perfectly with no drilling. Stupidly, I purchased it from another online company thinking I was getting a good deal. Turns out etrailer.com had it for less with FREE shipping. Oh well ... live and learn. Now I know that etrailer.com is one-stop shopping for bike racks AND trailer hitches. (Full disclosure: I had the garage down the street install the frame as it's easier with a lift) Only snafu: the shipment contained an extra set of keys that I assumed was for the hitch bolt lock (there was also a set of keys on the bolt itself). I spent 15 minutes using those keys trying to figure out how to remove the lock from the bolt to install it on the hitch. The keys just wouldn't turn in the lock. I called etrailer.com and Kevin told me to try the other set of keys ... and they worked. So an extra set of keys came with it that did absolutely nothing ... weird! Obviously, I can't speak to the longevity and durability of the Swagman Chinook 2 Bike Platform Rack as I just installed it. What I can speak to is the sturdiness of it, the ease of the installation and my complete satisfaction with the good folks at etrailer.com.
I ordered the Swagman Chinook 2 Bike Platform Rack on line from etrailer and so far have been very satisfied. The bike rack was delivered in less than a week. Unpacking the rack and assembly was fairly straightforward. I have read some reviews that complained the assembly instructions were a bit vague. I didn't have a problem but can see where others without a mechanical background get confused. The rack is very sturdy, but there is some side to side play in the tilt mechanism. I'm not sure this can be avoided with a rack that folds down. Installing the Curt trunk stabilizing strap takes most of the sway out of the rack. Installation is fairly easy and quick. It takes me 6 - 7 minutes to install the back on my hitch, and to install the bike and be ready to drive away. That seems reasonable to me. So far I've only loaded 1 bike. I've included pictures of my installation on a 2014 Mercedes Benz E350 sedan. Clearance between the bikes, the rack and the car are good. With the bike loaded in the inside, most forward position, I have 6" clearance between the pedal and the bumper. With the bike removed, the center support folded flat and the rack folded up in the storage position, I have 4" clearance between the closest part of the bike rack (the fold down hinge assembly) and the back bumper of the car. I am able to open the trunk of the car without removing the bikes or using the tilt feature, but I do have to remove the stabilizing strap first. Overall, I'm very pleased with the bike rack and think it will serve me much better than my old strap on rack. Since the weather has been cool since getting the bike carrier, I haven't taken any long trips to give it a real workout.
# 6
Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black
I've taken this rack all over New England on the front of my Dodge Ram 3500 pick up truck with a truck camper. I had no idea it was possible to love a bike rack so much. After one drive I didn't ever worry about it again. So nice that it locks up when I am camping or taking a quick stop for food on the road. So glad I bought it from etrailer. They totally help me pick the perfect rack for my challenging set up.
Still very new, but what an awesome bike rack! Assembly was a snap and the rack is rock-solid when you secure it to the hitch receiver. etrailer was amazing too - excellent communication, price and fast, free delivery. Overall I am extremely happy with the rack and service!
# 7
Yakima RidgeBack Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
Check out my other review on the hidden hitch for a 2015 BMW 4 Series for the majority of the review, but this thing is great. Easy setup and install, does all the things it's supposed to do. Mounting and removing bikes is a snap with the included clips (big difference from some of the cheaper variants with nylon ratchet straps). Fits very snugly in my 2" receiver, and pretty solid on the highway and over bumpy roads.
First trip with 3 bikes. Nary a wobble. The anti-sway strips appear to make a big difference.
# 8
Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.
With a few adjustments this rack has delivered. Needed to add additional strapping since the provide straps for securing the bikes to center bar were not long enough due to my ebike design (Velotric). My bikes are step through with a thick frame so provided straps won't fit. Simple adjustment with strapping resolved minor issue. Speed of 73 mph on the highway and some bumpy VT roads and this rack performed.
# 9
Swagman XTC4 Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
So far I’ve just assembled it and took a quick test drive around the block. My initial thought is this thing is perfect. It’s super sturdy and easy to use. My only gripe and it’s not fault of the rack, but it’s heavy…
If you've done any research or read any of the other comments on either this rack, or this seller...rest assured they really are as good as everyone says! I ordered my rack on around 4pm est on a Friday afternoon and within an hour I received an email that said they have shipped my product AND upgraded to priority shipping. Can't say enough positive things about the customer service! When the rack arrived, it took me a little over half an hour to get it set up. Probably would e been faster if I were even slightly mechanically inclined (or if didn't I didn't have to borrow a socket wrench from my neighbor). We finally had an opportunity to load up the bikes and head out for a ride today. As others have said, the first time you load up your bikes, it's kind of like a puzzle to get them situated. Took about 15 minutes. This rack is awesome! Very sturdy and the bikes were very secure. Only racks I have had in the past were rooftop fork mount racks. This is so much easier! On e we got to the trail (over an hour drive) getting the bikes off was a piece of cake. Afterwards, it was time to load them back up and it was less than 5 minutes to get them all on and ready to hit the road. There were other 4-bike racks on the website, but this one had enough great reviews that I felt comfortable making the purchase. After the fact, I'm very glad I did! I can't imagine the $800 rack can be that much better than this, and I highly recommend this for anyone looking for a 4-bike platform rack. I will definitely recommend this rack and etrailer.com to everyone I know.
# 10
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Pearl
Bike rack arrived promptly and undamaged. Now that it is assembled I love it. The etrailer website videos showing features and operation were much appreciated however the assembly instructions were lacking. There were unidentified parts, unlabeled parts, poor descriptions and I could not find a video to assist with assembly. It should have taken 15 minutes to assemble but took much longer because my 1st 2 attempts were unsuccessful.
Just what I needed. I have considered multiple brands and models but ended up deciding to get the Sherpa 2.0, mainly because its lightweight and easy to set up. So far no regrets about it. Took it in three road trips already to carry two 29ers and it has performed really well, no issues about bikes coming into contact with each other. Highly recommended!
Thule Hitch Bike Racks Review - 2015 Nissan Murano
Adam: What's going on, everybody Adam here with etrailer. Today, we're going to be taking a look at the Thule helium platform style bike rack on our 2015 Nissan Murano. If you're looking for a bike rack for your carbon fiber bikes, you found it. If you're looking for a lightweight rack that's got locks and everything you want, you found it. And if you're looking for a really, really good looking rack, you found it.I like this bike rack a lot, as you can tell, just because of many different things. One, we have a cable lock that is included, which is awesome.
Hollywood Racks Hitch Bike Racks Review - 2015 Nissan Murano
Adam: What's going on, everybody Adam here with etrailer. Today, we're going to be taking a look at the Hollywood Racks Destination 4 platform-style bike rack on our 2015 Nissan Murano. So this is going to be able to get four bikes to and from your destinations, perfect fit for this car, just because you can fit four people in here pretty easily. So, if you have a carbon fiber frame bike, this probably isn't the best route to go, just because it is going to strap to your frame. I usually like to get wheel-hook type bike racks whenever I have a carbon frame bike, but any of the other bikes you may have it's going to work really, really well with it. Electric bikes, no, but it is going to be able to fit tires widths up to three inches, and we're going to have a weight capacity of 35 pounds per bike.What I like about it is how diverse it can be.
Curt Hitch Bike Racks Review - 2015 Nissan Murano
Adam: What's going on, everybody Adam here with etrailer. Today, we're going to be taking a look at the CURT four hanging style bike rack on our 2015 Nissan Murano.So, you got four bikes. This bike rack is going to be able to carry four bikes. We are going to have a maximum capacity of 180 pounds. So, that's 45 pounds per cradle. So, regardless of what kind of bike you may have, let's say you've got a kid's bike.
Kuat Hitch Bike Racks Review - 2015 Nissan Murano
Today in our 2015 Nissan Murano, we're going to be trying out Kuat's transfer one bike platform rack. This bike rack will allow you to carry one bike on the back of your Nissan Murano using your existing hitch. Here on our test course, we'll start by going through the slalom. This is going to show us the side to side action, which simulates turning corners or evasive maneuvers. Once we get to the alternate speed bumps, we'll see the twisting action. This will simulate hanging a curb or pothole, or driving over uneven pavement.
Thule Hitch Bike Racks Review - 2015 Nissan Murano
Today on our 2015 Nissan Murano, we're going to be doing a test fit of the Thule Vertex Hanging Style 4 Bike Rack. As you can see we've already got our bike up here in place so you can see what it's going to look like once you have it fully assembled and on the back of your vehicle. This is going to be part number TH9029XT. Let's start off by getting a few measurements starting with our closest distance first down here at the bottom flange to the back side of the bumper that's going to be about 1 1/2 inches. Overall distance that we've added to the back of the vehicle from the backside of the bumper to the backside of the cradle arms is going to be about 35 1/2 inches and our rear ground clearance will be about 9 3/4 inches to the bottom side of the shank here. All right let's talk about how the bike is secured to our rack. You are going to have an alternating strap on every other side as you can see here. Those lower hanging straps are going to be your most important straps.
Yakima FullTilt Hitch Bike Racks Review - 2015 Nissan Murano
Today on our 2015 Nissan Murano we're going to be doing a test fit of the Yakima FullTilt hanging-style 4-bike rack. As you can see, we've already got our bike up here and in place so you can see what it's going to look like once you have it fully assembled and on the back of your vehicle. This is going to be part number Y02462. Let's start off by getting a few measurements, starting with our closest distance first down here at the bottom flange to the backside of the bumper. It's going to be about 6-1/4". Overall distance that we've added to the back of the vehicle from the backside of the bumper to the backside of the cradle arm is going to be about 37". Our ground clearance from the bottom of the fin on the bottom side of the shank at about 9". Now let's talk about how our bike is secured to our rack.
Curt Hitch Bike Racks Review - 2015 Nissan Murano
Today on our 2015 Nissan Murano, we're going to be doing a test fit of the Curt Premium 4 Hanging Style 4 Bike Rack, part number C18064. As you can see, we've already got a bike up here on our platform, completely assembled so you can see what it's going to look like once you have it on your vehicle. Let's start off by getting a few measurements. Our closest measurement will be down here on the front hand side, from the T handle to the back side of the bumper, at about 3 3/4 inches. This rack does come with a two inch shank for your two inch receivers only and it's going to be attached using an anti-rattle bolt, which we'll go over in a few minutes. Overall distance that we've added to the vehicle will be from the bumper to the backside of the cradle arms at about 32 inches. Ground clearance from the backside at about 9 1/2 inches. Moving up top, we'll talk about how the bike is secured to the rack.
What our customers are saying:
"Just to let you know I was very satisfied with my orders for a hitch, wiring harness, bike rack and extension. I have a 1995 Dodge Ram van and some of the parts are hard to get elsewhere. I received all my orders proptly and will recommend you to others. The pricing can't be beat. Thank you. Sincerely, Frank"