Dexter Steel Brake Line Tubing - 10'
(1 reviews)
Price: $48.23
In Stock
Dexter Steel Brake Line Tubing - 10'
Item # T1074500
Retail:$53.56
Our Price: $48.23
You Save: 10%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (1)
- Q & A (0)
- Videos (1)
- Photos
Dexter Accessories and Parts - T1074500
- Brake Actuator
- Trailer Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Brake Line Components
- Dexter
- 10 Feet Long
- Steel Brake Line
Durable Bundyweld tubing is designed for use with hydraulic brake systems.
Features:
- Tubing is designed for use with hydraulic brake systems
- Copper plated steel with ProCoat 2000 finish for corrosion resistance
- Bundywelding process ensures greater rigidity for high-pressure applications
- 10' Length
071-A66-00 Dexter Axle Bundyweld Tubing - 10'
Replaces Titan 1074500
Video of Dexter Steel Brake Line Tubing - 10'
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Titan Trailer Brakes T1074500 Review
Today, we're going to take a look at the Titan 10 foot long steel brake line tubing. Brake lines are what you run brake fluid from your brake actuator to your trailer brakes. The tubing on this is designed for use with a hydraulic brake system. This is a copper plated steel, with a pro-coat 2000 finish for corrosion resistance. They do use a Bundy welding process on these to insure greater rigidity for high pressure applications. If you notice on the ends, they use a double flared steel construction.
Then, each end has these swivel fittings on it for easier installation. The deep treads on the fittings will help improve the connection to help prevent any leaks. Again, the length on this is 10 foot long. The tubing diameter is 3/16ths of an inch. That should do it for the review on the Titan 10 foot long steel brake line tubing.
Customer Reviews
Dexter Steel Brake Line Tubing - 10' - T1074500
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Durable Bundyweld tubing is designed for use with hydraulic brake systems.by: Doug H.09/16/2016
Product arrived a day earlier than expected. Used to to rework break line installed on my trailer. Ordered a longer piece than need so i could replace several shorter lines. Worked like a champ.
Service from these folks is outstanding. They have earned a new customer. When I need parts, this will be the first stop.
1
1
See what our Experts say about this Dexter Accessories and Parts
- What Brake Lines do I Need for My 2006 Shorelander Boat Trailer with Hydraulic Brakes? I am assuming you mean 90 inches (7.5 feet) and not 90 feet for the length of your brake lines. If this is the case, I recommend the 10-foot long Titan Steel Brake Line Tubing # T1074500. This line is made of copper-coated steel for rust and corrosion resistance. It is also perfect to use with hydraulic brake systems.
view full answer... - Replacement Brake Lines for 2016 Tracker Boat TrailerWe carry brake lines in various sizes and materials that you can see on the page I linked for you. These include both steel lines and flexible lines and both complete brake line kits like # DM5429 as well as individual lines. For a 7-foot flexible line with 3/16-inch male fittings you can use Kodiak # BH-3MFS-7 or for a shorter 4-1/2-footer part # BH-3MFS-4-5. For a 10-foot steel line you can use # T1074500. It is perfectly okay to replace a steel line with a flexible line. All such...
view full answer... - Solution for Needing 87 inches of Trailer Brake LineThe best option would be our 10 foot long section part # T1074500 most likely. It's a steel cable so you would need to coil the excess. Of if you can get away with 84 inches we have the part # bh-3mfs-7. We don't have exactly 87 inches.
view full answer... - What Replacement Brake Line do I Need for My Boat Trailer with Hydraulic Brakes? Since you have a boat trailer, I am assuming you are looking for hydraulic brake lines. The closest length of line we have is the 10-foot Titan Steel Brake Line Tubing # T1074500. This line is specially designed for hydraulic brakes and comes with copper-plated steel with a ProCoat 2000 finish for greater protection from rust and corrosion.
view full answer... - Brake Line Kit that Could be Used with Military Trailer M101-A2We have tandem brake line kits that should work well on your utility trailer like the part # HS496-252 which has a 25 foot main line or part # 20TA-BLKIT which is all flexible lines and a 20 foot feed line.
view full answer... - Can Titan Steel Brake Line Tubing be Used in a VehicleThe Titan Steel Brake Line Tubing # T1074500 is tested and meets SAE Standards for brake lines. There isn't any reason why it has to be on trailer and not on a vehicle like your Nova.
view full answer... - Troubleshooting EOH Horse Trailer Brakes That Stay Engaged When Brake Pedal is ReleasedSince you have replaced your brake assemblies and flexible brake lines, and have bled the system, the sticking brakes on your horse trailer are most likely caused by the electric-over-hydraulic actuator itself or its main steel brake line. It is possible that the actuator is damaged and is not allowing the brake pressure to back off when you stop pressing the pedal. It is also possible that there could be a bit of foreign material in the main steel brake line (rust is most likely) that...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.