1. Trailer Leaf Spring Suspension
  2. Redline
  3. Hangers
  4. Suspension Kits
  5. Spring Mounting Hardware
  6. Double Eye Springs
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center

Item # APT1
lowest price pledge
Retail:$131.44
Our Price: $96.21
You Save: 27%
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 26 lbs
Quantity: 
In Stock
Trailer Leaf Spring Suspension APT1 - Hangers,Suspension Kits - Redline
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Leaf-spring mounting kit includes 2-1/2" tall front hangers, 5-7/16" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 8" long. Components for mounting axle to springs sold separately. Lowest Prices for the best trailer leaf spring suspension from Redline. Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center part number APT1 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (18)
  • Photos
  • Why etrailer?

Redline Trailer Leaf Spring Suspension - APT1

  • Hangers
  • Suspension Kits
  • Spring Mounting Hardware
  • Double Eye Springs
  • Tandem Axle
  • Redline

Leaf-spring mounting kit includes 2-1/2" tall front hangers, 5-7/16" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 8" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 4 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4" or 4-1/2" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (4) 2-1/2" Tall front and rear hangers (115918)
    • (2) 5-7/16" Tall center hangers with 3/4" bolt holes (115919)
    • (2) 8" Long straight equalizers (TREQR83)
      • 3/4" Diameter center hole for mounting to hanger
      • 9/16" Diameter end holes for attaching to springs
    • (8) 2-5/8" Long shackle straps (115052)
    • (12) 3" Long x 9/16" diameter shackle bolts (9163B)
    • (12) 9/16" Diameter locknuts (916DLN)
    • (2) 3-1/2" Long x 3/4" diameter wet equalizer bolts (126A1LN)
    • (2) 3/4" Diameter castle nuts (165093)
    • (2) 2-1/4" Long cotter pins (165649)
    • (2) 1/8" MPT grease zerks (1610)
  • Designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles
  • Does not include components for mounting axle to springs



Hanger Locations for Tandem Axle

Leaf SpringsA - Distance Between Front and Center HangersB - Distance Between Center and Rear HangersC - Distance Between U-BoltsD - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-169275 (1020)24-3/4"24-3/4"29-1/2"4-1/2"1-3/4"
(typical 2,000-lb trailer axle)
SP-219275 (PR722)
SP-220275 (PR3)
SP-218275 (PR4)
SP-212275 (PR4B)
SP-111275 (PR5)
SP-198275 (PR6)
29-1/2"29-1/2"34"4"2-3/8"
(typical 3,500-lb trailer axle)


APT1 Tandem Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs






Customer Reviews

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center - APT1

Average Customer Rating:  4.7 out of 5 stars   (7 Customer Reviews)

Leaf-spring mounting kit includes 2-1/2" tall front hangers, 5-7/16" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 8" long. Components for mounting axle to springs sold separately.

- APT1
by:

These were ok at best, two cracked within 9 months of installation requiring additional repair. 917551



- APT1
by:

878118



- APT1
by:

Perfect replacement. Everything needed was included 573901



- APT1
by:

I am impressed with the quality and the low price. I talked to some of the local trailer sales people about the same parts and they could not even come close, saying the price from etrailer was less than they could buy the for. The delivery was quick. The parts are heavy duty steel and complete with everything I need. I would not hesitate to purchase from these people again. 283203



- APT1
by:

Wondered about the order. After seeing your notification on delivery, had to go figure out where they had placed it. Was placed in the cab of the truck. Not a problem, just hadn't been in it for two weeks, and since I am blind in one eye and can't see out of the other, didn't see the delivery sticker on truck window. Everything appears to be in order. Will put new parts on trailer next week. Oh, this is a two axle, two horse trailer. Thanks David T. 159922



- APT1
by:

Super service and shipping. Part of shipment was lost by UPS and Etrailer made good and shipped me replacement before UPS even completed their review. Great folks. Thank you 159448



- APT1
by:

I am completely satisfied dealing with this company; best price, quality merchandise and prompt delivery. I would trust this company with my business, my wife, my whiskey and my money. 61999


7
7

Ask the Experts about this Redline Trailer Leaf Spring Suspension

  • Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
    To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 17 feet, then the center-line location...
    view full answer...
  • Does it Matter Which Way a Double-Eye Trailer Leaf Spring Faces
    If they are double-eye leaf springs, it should not matter which way they are facing. But if they are slipper springs, the eye end is at the front and the slipper is at the back. The springs that we carry are not marked as to which end is front and I have seen them either way on a trailer. I have included some links to suspension FAQs for you.
    view full answer...
  • Why Do Suspension Hanger Kits Have Different Height Hangers
    The varying heights of the hangers is all designed so that you end up with the leaf springs as level as possible and still end up a desired distance away from the trailer frame. It may seem odd, but the center hanger will stick down further because the shackle straps that attach to the equalizers make up for the height difference. The equalizer is there so there is movement between the axles going over bumps to help smooth things out. The # APT1 uses a very flat equalizer so to make...
    view full answer...
  • How to Determine Trailer Leaf Spring Hanger Spacing
    You can refer to the linked articles on trailer axle spacing and leaf spring suspensions to help you determine where to position your spring hangers on your tandem axle trailer build. Hanger spacing depends on axle placement and axle placement should be determined based on having the trailer's tongue weight in the appropriate 10- to 15-% range. As you work out the design for the trailer, it is best to have the layout of the trailer finalized before placing the axles. This will ensure...
    view full answer...
  • Is There An Upgrade or Rebuild Kit for Tandem Trailer with Straight Equalizers
    Yes, we do offer some great options to replace and or upgrade the straight equalizer setups. If you are looking for just a complete kit then go with the Tandem-Axle Trailer Hanger Kit part # APT1 (the hangers can be discarded). If you are just looking to upgrade what you have then go with the Never Fail Tandem Axle Suspension Upgrade Hardware Kit part # LC281285. There is also the option of adding shocks which will do the most for improving ride quality, the Lippert Components Bolt-On...
    view full answer...
  • Recommended Tire to Fender and Tire Sidewall to Trailer Frame Clearance
    The minimum distance between side wall of the tire and and trailer frame depends on the trailer, you definitely don't want the tire and the trailer to touch so 2" of clearance is a safe distance however you may be able to get away with less as long as they do not touch. The recommended clearance between the top of the tire and the fender is 3-4 inches when the suspension is fully compressed to accommodate for suspension travel.
    view full answer...
  • Are the Bushings Included in the APT1 Tandem-Axle Hanger Kit for Double-Eye Springs?
    The bushings on the 2 long equalizers are included in the # APT1 kit, but the rest of the bushings will typically come included with the leaf springs that are not included in this kit. Which ones you will need to purchase would depend on the diameter sized hole in your leaf spring, if it does not already accommodate the 3/4 inch diameter of the bolts included into this kit. I have linked our bushings as well as the bushing that has a 3/4 inner diameter to this page for your convenience.
    view full answer...
  • Individual Parts for Trailer Suspension Hanger Kit APT1 without the Hangers
    You can get the parts in hanger kit # APT1 separately but not as a kit minus the hangers. The equalizer is # TREQR83. For shackle straps you will need 8 of # 115052. For shackle bolts and nuts you would need 12 of # 166081. For the 3/4 inch wet bolts, pins, nuts, and grease fittings you would need 2 of # 126A1.
    view full answer...
  • Parts Needed to Replace Leaf Springs, Shackles and Hangers on a Tandem Axle Trailer with 3 Inch Axle
    The # SP-218275 springs are not designed for use with a 3 inch Dexter axle. A 3 inch axle is rated for at least 6,000 pounds so you would need to go with the # SP-198275, 6-Leaf Double-Eye Spring. The # SP-198275 spring has a 24-7/8 inch length and will have the same axle spacing, 34 inches, as the # SP-218275 spring that you referred to. You should check your current axle spacing or wheel and tire size to be sure the 34 inch spacing will provide clearance to mount the tires on your...
    view full answer...
  • Trailer Suspension Hanger Kit Spacing for a Tandem Axle Trailer
    I would need to know the axle capacities to be sure but I can venture an educated guess. The only tandem axle double-eye leaf spring hanger kit we have that includes 8 inch equalizers is # APT1. With this kit, the center of the forward hanger to the center of the rear hanger would be 29-1/2 inches. It is the same from the center hanger to the rear hanger on center. That would make the center to center distance between the 2 axles 34 inches. I have included a picture showing the measurements...
    view full answer...
  • Will Trailer Suspension Hanger Kit # APT5 Fit a Trailer with 2-3/8 Inch Diameter Axle
    You can use the Tandem-Axle Trailer Hanger Kit # APT5 for your trailer with the 2-3/8 inch axle. A 2-3/8 inch diameter axle is typically found on 3,500 pound axles which is within the range of this kit (2,000 to 7,000 pound axles). The measurements in the chart on the page can be used as a guide. A better option for a 2-3/8 inch axle is kit # APT3, # AP233-H248, or # APT1. It all depends on the axle spacing, spring measurements, and equalizer length.
    view full answer...
  • Hanger Distance for Installing 25-1/2 inch Leaf Springs with Hanger Kit # APT8
    To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 10 feet, then the center-line location...
    view full answer...
  • Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
    To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 10 feet, then the center-line location...
    view full answer...
  • Spring Hanger Position for Tandem Axle Trailer with 6000 lb Axles
    To determine the location for the axles on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 18 feet, then the center-line location for the equalizer...
    view full answer...
  • Where to Place Axles on a Tandem Axle Trailer
    To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 10 feet, then the center-line location...
    view full answer...
  • What Is The Proper Hanger Spacing For A 3 Leaf 1,750 lb Capacity Leaf Sping
    The spacing of leaf springs varies depending on how many axles are on your trailer and the position of the spring. For a 3 leaf, 1,750 lb spring like part # PR3 the hanger specifications in the Redline Trailer Supplies Catalog are as follows: Single axle - 25-3/4 inches Tandem axle - A=29-1/2 - B=29-1/2 Triple axle - A=29-1/2 - B=34 - C=29-1/2 The recommended hanger kit for a single axle trailer is Single Axle Trailer Hanger Kit, part # APS1, or part # APS4. For tandem axle, the...
    view full answer...
  • Tandem Axle Trailer Suspension Hanger Kit with 8 Inch Long Straight Equalizers
    The tandem axle version of trailer suspension hanger kit # APTT1 is actually # APT1. I have also included a link to all of the tandem axle kits we have.
    view full answer...
  • Replacement Suspension and Brake Parts for a 1973 Bara LS Trailer
    Thank you for all of the info! Based on what you told me and the pictures you sent in separately I believe I know what you need. The brakes you need are the Electric Trailer Brake Kit # AKEBRK-35-SA which measure 10" x 2-1/4" and have a 4 bolt flange mounting pattern. I also recommend replacing your hub and drum assemblies as well. For this the Trailer Hub and Drum Assembly # AKHD-545-35-K should work but you will want to verify that your trailer currently uses inner bearing # L68149...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Updated by:
Sarah W
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 800-298-8924