Customers compare BXW0556 to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Blue Ox SwayPro weight distribution system with sway control. Now, a weight distribution system is designed to help spread out the weight of your trailer across all of the axles of your tow vehicle and your trailer. So rather than having the full weight of the trailer on that one connection point between your… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The best place to check compatibility of a weight distribution system is the owner's manual, and when I looked up the online version for your 2023 Acura MDX it stated that one isn't necessary but if you wish to use one then you just need to…
view full answer...The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…
view full answer...It sounds like you have free backing braking assemblies on your trailer so a lockout at the trailer coupler is not needed. In order to replace the Atwood Surge Brake Actuator 82541, I recommend using the Titan Leverlock Brake Actuator part…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…
view full answer...A 2016 Forest River Flagstaff Hard Side T21DMHW has a GVWR of 3,382lbs so you'd be looking at a tongue weight around 300-400lbs. If you're experiencing some sway while towing your trailer then I recommend the Fastway e2 Weight Distribution w/…
view full answer...I took a look at the Ram's owners manual and it states if the trailer weighs more than 1,000 lbs loaded, it should have its own brakes. Towing the 3500 lb trailer without braking could lead to accelerated brake lining wear, higher brake pedal…
view full answer...To convert your 4-way to a 7-way so that you can install a brake controller in your 2013 Toyota FJ Cruiser will require the kit part #ETBC7. For a brake controller I would recommend the Prodigy P3 Brake Controller part #90195. This is our best…
view full answer...If I'm not mistaken the 2017 Jeep Wrangler Unlimited Rubicon Recon uses the MOPAR off-road bumper #82213654. I've attached a picture for you to compare. If this is the case then the Draw-Tite #DT78MR will work just fine on your Jeep. I've…
view full answer...The suspension enhancement options for the 2018 Ford F-150 may help with the porpoising effect that you are experiencing. However, usually porpoising is caused by the trailer weight not being properly distributed. If there is too much weight in the…
view full answer...The fact that your Jeep dealer and Jeep customer assistance could not tell you this information is surprising. They should be able to. I took a look at the 2017 Jeep Cherokee owner's manual and it says on pages 370 and 371 under the trailer…
view full answer...Draw-Tite trailer hitch #DT78MR will fit if the rear bumper on your 2017 Jeep Wrangler Unlimited is the same as the production Rubicon 10th Anniversary Edition (Mopar part 82213654) or with the standard bumper. If you look at the picture I have…
view full answer...When installed on a 2016 Jeep Wrangler Unlimited, the Draw-Tite 76104 will measure 6" and the Draw-Tite #DT78MR will measure 6-3/8", so it will be slightly longer (diagrams included). These are pretty similar to each other and do have the…
view full answer...